Zusammenfassung
Spandicke und Spanlänge haben einen bedeutenden Einfluß auf die Festigkeitseigenschaften orientiert gestreuter Spanplatten. Durch Versuche sollte für industrille Herstellungsbedingungen die optimale Spanform ermittelt werden. Als Orientierungsvorrichtung wurde ein Scheibenstreukopf mit separierender Wirkung eingesetzt. Die erreichten Biegefestigkeiten parallel zur Orientierung lagen erheblich über bisher veröffentlichten Werten von industriell hergestellten Platten.
Abstract
Chip length and chip thickness greatly affect the strength properties of oriented structural boards (OSB). Optimum particle shape for the production of boards under industrial conditions was experimentally determined. As a preliminary device a dise-spreader with separating effect was applied. The bendings strength parallel to the chip orientation was remarkably higher as compared with previously published data on industrial particle board.
Literatur
Geimer, R. 1976: Flake alinement in particle board as affected by machine variables and particle geometry. USDA For. Serv. Res. Pap. FPL 275 Fr. Prod. Lab. Madison Wis.
Heebink, B., Hann, R. 1959: How wax and particle shape affect stability and strength of oak particle boards. Forest Prod. J. 9 (7): 197–203.
Klauditz, W., Ulbricht, H.J., Kratz, W., Buro, A. 1960: Herstellung und Eigenschaften von Holzspanplatten mit gerichteter Festigkeit. Holz Roh- Werkstoff 18 (10): 377–385.
Lehmann, W.F. 1974: Properties of structural particle boards. Forest Prod. J. 24 (1): 19–26.
McKean, H.B., Snodgrass, J.D., Saunders, R.J. 1975: Commercial development of composite plywood. Forest Prod. J. 25 (9): 63–68.
Post, J. 1961: The effect of particle geometry and resin content on bending strength of oak particle board. Forest Prod. J. 8 (10): 317–322.
Price, E., Kesler, C. 1974: Analysis of southern hardwood as furnish for a wood flake-resin composite structural material. T. a. A. M. Report Dept. of Theoretical and Applied Mechanics Univ. of Illinois, Urbana, Illinois
Rackwitz, G. 1963: Einfluß der Spanabmessungen auf einige Eigenschaften von Holzspanplatten. Holz Roh- Werkstoff 21 (6): 200–209.
Turner, H.D. 1977: Structural flakeboard stiffness-relation to deflection criteria and economic performance. Forest Prod. J. 27 (12): 31–35.
Rights and permissions
About this article
Cite this article
Walter, K., Kieser, J. & Wittke, T. Einfluß der Spanform auf einige Festigkeitseigenschaften orientiert gestreuter Spanplatten. Holz als Roh-und Werkstoff 37, 183–188 (1979). https://doi.org/10.1007/BF02626531
Issue Date:
DOI: https://doi.org/10.1007/BF02626531