Abstract
The microcomputer based data-acquisition and control system employed in an experimental pressure steam drying kiln and the advantages of using this approach in wood drying research are discussed. The tasks of the system include measuring all relevant parameters, performing real-time control and storage onto magnetic media.
Zusammenfassung
Ein System zur automatischen Datenerfassung und Regelung eines Heißdampftrockners mit Hilfe eines Mikrocomputers wird beschrieben. Die Vorteile dieser Vorrichtung für die wissenschaftliche Untersuchung der Holztrocknung werden diskutiert. Das System erlaubt die Messung aller wichtigen Parameter, eine Echtzeit-Steuerung und die Speicherung der Daten auf magnetische Datenträger.
Similar content being viewed by others
Literature
Forrer, J.B.; Vermaas, H.F. 1987; Development of an improved moisture meter for South African grownPinus pinaster andPinus radiata. For. Prod. J. 37(2):67–71
Heilbrun, M. A.; Ringleman, W. R.; Peberdy, N. J.; Rodd, M. G. 1980: Single-loop microprocessor-based controller. Pulse. The Communications Group, Natal, September: 18–23
Kollmann, F.; Malmquist, L. 1955: Untersuchungen über das Strahlungsverhalten trocknender Hölzer. Holz. Roh-Werkstoff 13:249–258.
Mackay, S. 1986: The PC in proess control. S.A. Measurement and control. The Communications group, Natal, August: 16–22
Miller, J. T. 1975. Industrial Intrument Technology. Fleet Street, London, E.C. 4. United Trade Press Ltd., 108
Vermaas, H.F.; Kuun, C.P. 1989. Experimental pressure steam dryer for lumber. Holz Roh-Werkstoff 47:235–241
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kuun, C.P., Vermaas, H.F. Computerised data-acquisition and control system for an experimental pressure steam dryer for lumber. Holz als Roh-und Werkstoff 47, 261–265 (1989). https://doi.org/10.1007/BF02610455
Issue Date:
DOI: https://doi.org/10.1007/BF02610455