Zusammenfassung
Die derzeit in der Bundesrepublik Deutschland vorgeschriebene visuelle Festigkeitssortierung von Nadelschnittholz ist in der Praxis wegen ihrer Kompliziertheit kaum anwendbar. Dennoch wird allgemein unterstellt, daß man nach DIN 4074 sortiert. Als Alternative zur visuellen Sortierung bietet sich die maschinelle Festigkeitssortierung an. Auch ihre Einführung wäre mit Schwierigkeiten verbunden. Dennoch erzwingen die schnelle internationale Entwicklung auf diesem Gebiet und die Verflechtung der Märkte Entscheidungen auch für die Bundesrepublik. Der internationale Stand der maschinellen Sortierung, ihre Vorzüge und Nachteile sowie Sortiermaschinen und ihre Wirtschaftlichkeit werden beschrieben.
Abstract
The method of visual stress grading for sawn coniferous timber presently in force in the German Federal Republic is too complicated for practical use. Yet officially, grading is supposed to be done according to DIN 4074. Machine stress grading is regarded to be an alternative to visual grading though its introduction would also cause difficulties. However, the fast international development in this field and the interlacing of markets enforce decisions for the Federal Republic of Germany as well. The international application of machine grading, its advantages and problems as well as grading machines and economic aspects are described.
Literatur
Anonymus 1977: New techniques provide for higher yields of stress graded timber. Struct. Engin. 55: A 19
Anonymus 1979: Schnittholz-Sortierung mit Gammastrahlen. Holz-Zbl. 105: 789
Anton, A., Bryant, L. H. 1973: Mechanical stress grading of timber in Australia. Proceedings of IUFRO-5 meeting, Cape Town, Pretoria, Stellenbosch, 2: 8–12
Curry, W. T. 1965: Progress in stress-grading of boards. Timber Trades J. 254 (11)
Curry, W. T. 1969: Mechanical stress grading of timber. Forest Prod. Res. Lab. Princes Risborough No. 18
Curry, W. T. 1980: Persönliche Kommunikation
Curry, W. T., Tory, J. R. 1976: The relation between the modulus of rupture and modulus of elasticity of timber. BRE Current Paper CP 30/76
Curry, W. T.; Fewell, A. R. 1977: The relation between the ultimate tension and ultimate compression strength of timber and its modulus of elasticity. BRE Current Paper CP 22/77
Endersby, H. J. 1974: Stress grading home-grown softwoods. BRE Inf., Princes Risborough IS 5/74
Foslie, A. M.; Moen, K. 1968: Strength properties of Norwegian spruce. 1. Bending strength, modulus of elasticity and tensile strength tested on the structural sizes 3″×8″ and 2″×4″. Norsk Treteknisk Institutt Meddelelse Nr. 33
Fronius, K. 1970: Vollautomatische Schnittholzsortierung nach Festigkeit. Holz-Zbl. 96: 2233–2234
Galligan, W. L.; Snodgrass, D. V.; Crow, G. W. 1977: Machine stress rating: Practical concerns for lumber producers. U. S. D. A. Forest Service General Technical Report FPL 7
Galligan, W. L.; Gerhards, C. C.; Ethington, R. L. 1979: Evolution of tensile design stresses for lumber. U. S. D. A. Forest Service General Technical Report FPL 28
Gourvitch, A.; Lohmann, U. 1974: Stress grading-Studienreise nach England. Holz.-Zbl. 100: 2256–2257
Gruber, R. 1972: German project on stress grading. Proceedings of Anglo/Scandinavian Conference of Stress Grading, Princes Risborough
Hansmann, C. J. L. 1973: Mechanical stress grading operation in South Africa. Proceedings of IUFRO-5 meeting. Cape Town. Pretoria, Stellenbosch, 2: 415–427
Heimeshoff, B.; Glos, P. 1980: Zugefestigkeit und Biege-E-Modul von Fichten-Brettlamellen. Holz Roh-Werkstoff 38: 51–59
Hoyle, R. J. Jr. 1965: Marketing experiences with machine stress rated lumber. Proceedings of Second Symposium on the Nondestructive Testing of Wood, 37–42. Washington State University, Pullman
Ince, P. J. 1979: Cost of grading lumber by the machine-stress-rating process. Forest Prod. J. 29(10): 80–83
Kaiserlik, J. H. 1978: Nondestructive testing methods to predict effect of degradation on wood: a critical assessment. U. S. D. A. Forest Service General Technical Report FPL 19, 53 S.
King, R. J. 1978: Microwave electromagnetic nondestructive testing of wood. Proceedings 4th Nondestructive Testing of Wood Symposium, Vancouver, Wash., 121–134
Kübler, H. 1965: Maschinelle Gütesortierung des Holzes nach der Festigkeit. Holz-Zbl. 91: 89–90
Kufner, M. 1977: Maschinelle Schnittholzsortierung und ihr möglicher Einfluß auf die Holzverwendung. Holz Roh-Werkstoff 35: 173–178
Lohmann, U. 1974: “Stress grading”—eine Methode zur mechanischen Festigkeitssortierung. Holz-Zbl. 100: 1729
Lohmann, U. 1976: Gütebedingungen für Bauholz. Holz-Zbl. 102: 1191–1192
Lohmann, U. 1978: Ist die Schnittholzsortierung reformbedürftig? Holz.-Zbl. 104: 697–698
Lundberg, C.J.; Thunell, B. 1978: Machine stress rating of large and small dimensions of Swedish redwood and whitewood. Svenska Träforskningsinstitutet, Meddelande Serie A No. 484, 46 S.
Lux, O.; Neuser, E. J. 1980: Jahresbericht 1979/80. Vereinigung Deutscher Sägewerksverbände e.V., 75 S, Wiesbaden: Selbstverlag
May, H. A. 1975: Zur maschinellen Festigkeitssortierung. Holz-Zbl. 101: 1161–1162
Möhler, K.; Ehlbeck, J.; Hempel, G.; Köster, P. 1971: Erläuterungen zu DIN 1052, Blatt 1 und 2—Holzbauwerke—Ausgabe Oktober 1969. Karlsruhe: Bruderverlag
Molenda, Z.; Jankiewicz, B. 1977: Technologie und Organisation bei der Herstellung von Bauschnittholz mit Anwendung der Festigkeitssortierung. Holztechnologie 18: 43–45
Müller, P. H. 1968: Mechanical stress-grading of structural timber in Europe, North America and Australia. Wood Sci. Technol. 2: 43–72
Pellerin, R. F. 1976: Nondestructive evaluation of wood and wood products. Proceedings of XVI IUFRO World Congress, Oslo, 184–189
Pierce, C. B. 1980: Strength prediction and sampling of timber in structural sizes. Paper presented at IUFRO-5 Conference, Oxford
Räder-Roitzsch, J. 1971: Festigkeitssortiertes Bau-Schnittholz. Holz-Zbl. 97: 1267–1268
Schlumbom, H. F. 1976: Die maschinelle Festigkeitssortierung von Bauholz. Holz-Zbl. 102: 1151–1154
Schmidt, T. 1975: Sambandet mellan draghållfasthet och böjstyvhet för svenskt furu-och granvirke. Svenska Träforskningsinstitutet, Meddelande Serie B No. 331, 42 S.
Sunley, J. G.; Hudson, W. M. 1964: A report of research on the machine grading of lumber in Britain. Forest Prod. J. 14 (4): 155–158
Thunell, B. 1970: Flexural strength-stiffness relationships for structural Swedish softwoods. Papper och Trä 5: 309–322
Todd, R.L. 1978: Development of markets for MSR lumber. Proceedings of 4th Nondestructive Testing of Wood Symposium, Vancouver, Wash.: 279–281
Tory, J.R. 1978: Machine stress grading in the United Kingdom: Theory into practice. Proceedings of 4th Nondestructive Testing of Wood Symposium, Vancouver, Wash.: 77–82
Vinopal, G.W. 1980: Determination of the combined influence of density and knots on the mechanical properties of full-size structural timber. Paper presented at IUFRO-5 Conference, Oxford.
WWPA (1979): Product use manual. Western Wood Products Association, Portland, Ore
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Glos, P., Schulz, H. Stand und Aussichten der maschinellen Schnittholzsortierung. Holz als Roh-und Werkstoff 38, 409–417 (1980). https://doi.org/10.1007/BF02610437
Issue Date:
DOI: https://doi.org/10.1007/BF02610437