Zusammenfassung
In den Produktionsbetrieben der Holzindustrie haben sich nahezu alle verfahrenstechnischen Bereiche, zwar unterschiedlich rasch, aber meist tiefgreifend gewandelt. Dies gilt, wie die vorliegende Analyse zeigt, gerade auch für die Verfahren der spanlosen Verformung von Holz und Holzwerkstoffen durch Heißpressen. Die erstauliche Vielzahl an technischen Lösungen, die der Markt heute für die Pre\technik bietet, ist einerseits erfreulich, da dies zu grö\eren Auswahlmöglichkeiten für den Anwender und Betreiber führt. Andererseits verlangt dies nach einer übersichtlichen Darstellung, in welcher praxisrelevante und vergleichbare Daten zusammengestellt sind. Dies ist das Ziel des hier vorgenommenen Vergleichs zwischen heute industriell eingesetzten Pressen-Systemen. Nach eingehender Darlegung der zur Beurteilung herangezogenen Kriterien, werden fünf auf dem Markt befindliche Systeme miteinander verglichen und abschließend bewertet. Die Bewertung ist zusätzlich in einer Tabelle zusammengefaßt.
Abstract
In modern plants of the wood products industry nearly all files of processing technologies have changed, although with different speed, but nevertheless, in most cases very thoroughly. As demonstrated in the present analysis, this is also valid for the non-chipping procedures of wood working, especially by hot-pressing. The remarkable variety of technical solutions for pressing techniques which are on the market today is, on the one hand, a welcomed aspect as it provides better possibilities for settling technological problems. On the other hand this fact calls for an overall view which presents comparable data of practical relevance. The purpose of this paper is to give such a comparison of pressing systems applied nowadays in the wood industry. After a detailed explanation of the chosen criteria, five systems now on the market, are compared and evaluated. The values obtained are additionally summarized in a table.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Soiné, H. Moderne Preßtechnik in der Holzindustrie. Holz als Roh-und Werkstoff 39, 167–178 (1981). https://doi.org/10.1007/BF02609189
Issue Date:
DOI: https://doi.org/10.1007/BF02609189