Zusammenfassung
Die Presse ist die wichtigste und gleichzeitig auch die teuerste Maschine in einem Faserplattenwerk. Gewöhnlich stellt sie das Glied dar, von dem das gesamte Produktions-vermögen abhängt. Konstrukteure und Erfinder haben große Arbeit geleistet, um die Maschinenanordnungen zu verbessern und die Produktionskapazitäten zu erhöhen. Es wurde der Reaktionsmechanismus des Preßvorgangs beschrieben und das Preßdiagramm erklärt. Wärmebedarf und Wärmeverbrauch wurden untersucht. Verschiedene Preßkonstruktionen, Heizplatten und hydraulische Systeme wurden mit den Forderungen des Prozesses als Ausgangspunkt erörtert. Pressengröße, Format und Kapazität sind abhängig von dem Anwendungsgebiet und den Marktverhältnissen. Der Bekleidung der Presse soll große Aufmerksamkeit und Sorgfalt geschenkt werden, um die besten Wärmeübertragungsverhältnisse zu bewirken. Die Beschickungsanordnungen machen einen wesentlichen Teil der Preßmaschinerie aus und müssen deshalb genau auf die Presse abgestimmt sein, um die größte Kapazität zu gewährleisten. Abgepreßtes Wasser und austretender Dampf können für verschiedene Wärmezwecke verwendet werden.
Summary
The press is the most improtant and at the same time the most expensive machine in a fibreboard plant. Usually the whole production capacity depends upon it. Engineers and inventors took great efforts to improve the machine-arrangements in order to raise the production. The reaction mechanism of the press-process is described and an explanation for the press diagram given. Heat-requirement and heat consumption were tested. Several press constructions, heating plates and hydraulic systems are discussed. Press dimension, size and capacity are dependent on the field of application and market conditions. Full care and attention must be given to the shielding of the press, to secure the best conditions of heat transmission. The charging-devices make up an essential part in the press machinery, and therefore, have to be adjusted precisely to the press in order to guarantee the highest capacity. Squeezed out water and developed vapour can be used for several thermal purposes.
Schrifttum
Ljungbo, S.: Undersökning av ligninets plasticitet. Medd. fr. Wallboardindustriens Centrallab.1953. Dez. Nr. 11B.
Higgins, H. G., u. Fl. V. Griffins, J. Counc. Sci. Ind. Res. (Australia) Bd.20 (1947) H. 3.
Ögland, N. J.: Norsk Skogind, Bd.2 (1948), H. 11, S. 301/305.
Asplund, A., Preparation and Characteristics of Fiber Pulp for Hardboard, Northeastern Wood Util., Counc., Bull. Bd.31 (1950) H. 31, S. 24/42.
U. S. Pat. 1663505 (1928) U.S. Pat. 2046750 (1933), Schwed. Pat. 123779 (1948).
Kielland, K. K.: Hetvannsoppvarmning av wallboard-pressar. Vortrag geh. beim norweg. Wallboarding-Treffen in Hösbjör 6, 9. 49.
Hanssen, L. J.: Norsk Skogind. Bd.7 (1953) H. 11, S. 367/377.
Segring, S. B.: Varmeanläggningen i Vrena Fiberplattfabrik, Syensk Papperstidn. Bd.57 (1954) H. 16, S. 568/576.
Elieson, C. E.: Aktuellt om Wallboardpressen, Svensk Papperstidn. Bd.59 (1956) H. 11, S. 402/411.
Neusser, R.: Holzfaserplatten, ihre Herstellung und ihre Eigenschaften, Wien: Fromme-Verlag 1951, S. 62.
Kollmann, F.: Quanlitatsbestimmende Faktoren bei der Herstellung von Holzfaser-und Holzspanplatten, Svensk Papperstidn. Bd.53 (1950), H. 19, S. 591/604.
Munin: Karlholms AB, Svensk Trävarutidn, årsnummer1939, S. 493.
Katrinefors AB’s Wallboardfabrik, Svensk Träverutidn, årsmummer1944, S. 165.
Siempelkamp, E.: Schwed. Pat. 154438 (1956).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Segring, S.B. Die Pressung von Hartfaserplatten. Holz als Roh-und Werkstoff 15, 1–9 (1957). https://doi.org/10.1007/BF02608574
Issue Date:
DOI: https://doi.org/10.1007/BF02608574