Schrifttum
American Society for Testing and Materials, ASTM D 143-52, 1973. Standard methods of testing small clear specimens of timber. Annual Book of ASTM Standards. New York
Bienfait, J. L. 1926. Relation of the manner of failure to the structure of wood under compression parallel to the grain. J. Agric. Res.33: 183–194
Davies, G. W. 1968. Microscopic observation of wood fracture. Holzforschung22: 177–180
Dinwoodie, J. M. 1967. Recording the initiation and development of failure in timber. Nature216: 827–828
Dinwoodie, J. M. 1968. Failure in timber. Part 1. Microscopic changes in cell-wall structure associated with compression failure. J. Inst. of Wood Sci.21: 37–53
Dinwoodie, J. M. 1974. Failure in timber. Part II. The angle of shear through the cell-wall during longitudinal compression stressing. Wood Sci. Technol.8: 56–67
Frey-Wyssling, A. 1953. Über den Feinbau der Stauchlinien in über-beanspruchtem Holz. Holz Roh- Werkstoff11 (7): 283–288
Grossman, P. V. A., Wold, M. B. 1971. Compression fracture of wood parallel to the grain. Wood Sci. Technol.5 (2): 147–156
Hoffman, M., Raczkowski, J. 1968. Wplyw tarcia płyt oporowych przy jednoosiowym ściskaniu drewna na jego wytrzymałość i charakter zniszczenia. (Einfluß der Reibung der Druckplatten im Druckfestigkeitsversuch auf das Ergebnis und das Bruchbild.) Poznań, maszynopis w ITDAR
Jankowski, E., Skupinski, S. 1966. Materiały i wyroby scierne. (Schleifmaterialien und Schleifmittel). WNT. Warszawa
Keith, C. T., Côté Jr, W. A. 1968. Microscopic characterization of slip lines and compression failures in wood cell walls. Forest Prod. J.18 (3): 67–74
Kisiel, I. 1967. Reologia w budownictwie (Rheologie im Bauwesen). Warszawa. Arkady.
Kisiel, I., Lysik, B. 1966. Zarys reologii gruntów. Dzialanie obciazenia na grunt (Bodenflächenbelastung—Grundriß der Bodenrheologie). Warszawa, Arkady
Kollmann, F. 1936. Technologie des Holzes. Berlin: Springer Verlag
Nadai, A. 1950. Theory of flow and fracture of solids. New York-Toronto-London: McGraw-Hill.
Paul, B. In: Liebowitz, H. 1968. Fracture. An advanced treaties Vol. II. Mathematical fundamentals. New York-London: Academic Press
Pierełygin, L.M., Pievcov, A. H. 1934. Miehaničskije svojstva, i ispytanija drieviesiny. Gosliestechizdat. Moskva
Polska Norma: PN-71/D-04102 1971. Drewno. Oznaczanie wytrzy-małości na ściskanie wzdłuz włókien (Polnische Norm: Bestimmung der Druckfestigkeit paralle zum Faserverlauf). Warszawa
Siergiejenkov, G.D. 1974. O powyšenii tôcnosti centrirovanija obrazcov pri ispytanijach na sschatie. Zaw. Lab.41 (3): 336–337
Siergiejenkov, G. D. 1974. O mietodach operdielenija pročnosti materiałov wuslowijach odnoosnogo sschatija. Zaw. Lab.41 (4): 447–450
Skudra, A.M. 1975. Strukturnaja teoria proěnosti armirovannych płstkov pri rastiaschenni i sschatti., Mechanika polimerov.10 (6): 980–995
Tarnopolskij, Ju. M., Kincis, T. Ju. 1975. Mietody staticeskich ispytanii armirovannych plastikov. Izd. “Chimia», Moskva
Wardrop, A. B., Addo-Ashong, F.A. 1963. The anatomy and fine structure of wood in relation to its mechanical failure. Report Nr. 560. CSIRO, Australia: 169–200.
Wołynskij, W. N. 1974. Krasčetu skorosti rosta nagruzki pri ispytanii materiałov na mašinach s mechaničeskim privodom. Zaw. Lab.41 (8): 146–147
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kokociński, W., Raczkowski, J. Einfluß der Reibung zwischen Prüfkörper und Druckplatten auf die Druckfestigkeit parallel zur Faser. Holz als Roh-und Werkstoff 36, 241–246 (1978). https://doi.org/10.1007/BF02607708
Issue Date:
DOI: https://doi.org/10.1007/BF02607708