Schrifttum
Anderson, A. B., Wong, A., Wu, K. T. 1974a. White-fir bark and its extract. Forest Prod. J. 24 (7): 40–45
Anderson, A. B., Wong, A., Wu, K. T. 1975. Douglas-fir and western hemlock bark extracts as bonding agent for particle-board. Forest Prod. J. 25 (3): 45–48
Anderson, A. B., Wu, K. T., Wong, A. 1974b. Utilisation of ponderosa pine bark and its extract in particleboard. Forest Prod. J. 24 (8): 48–53
Back, E. L., Lundquist, K. E. 1975a. Barkens egenskaper särskilt med hänsyn till skivtillverkning. Svensk Papperstid. 78: 199–205
Back, E. L., Lundquist, K. E.: 1975b: Egenskaper hos skivor av bark. Svensk Papperstid. 78: 199–205
Baldwin, R. C., Murphey, W. K., Blankenhorn, P. R. 1974. Scanning electron microscope observation of rate carbonized hardwood bark and bark board. Wood Sci. 6: 231–236
Bosshard, H. H. 1960. Fludreszenzmikroskopische Untersuchungen in Spanplatten. Beih. Z. d. Schweiz Forstwes. 30: 13–21
Bosshard, H. H., Futò, L. P. 1963. Spezifische Färbungen zum Nachweis der Kaurit- und Tegofilm-Verleimung in Sperrholz. Holz Roh- Werkstoff 21: 225–228
Brinkmann, E. 1975. Die Verwendung von Rinde zur Herstellung von Platten. Holz Zbl. 101: 888
Burrows, C. H. 1960. Particleboard from Douglas-fir bark. Information Circular 15, Oregon Forest Research Center, Corvallis Oreg.
Chow, S. 1975. Bark boards without synthetic resins. Forest Prod. J. 25 (11): 32–37
Chow, S. 1977. Properties of boards made with ozone treatment. Wood Sci 9: 124–129
Deppe, H. J., Ernst, K. 1971. Isocyanate als Spanplattenbindemittel. Holz Roh- Werkstoff 29: 45–50
Dibuz, J. J., Shelton, F. J. 1967. Glueline identification. Forest Prod. J. 17 (10): 20–22
Fengel, D., Kumar, R. N. 1970. Electron microscopic studies of glued wood joints. Holzforschung 24: 177–181
Futò, L. P. 1973: Elektronenmikroskopische Direktabbildung von Leimfugen und Oberflächenbeschichtungen der Holzwerkstoffe. Holz Roh-Werkstoff 31: 52–61
Gerlach, D. 1969. Botanische Mikrotechnik. Georg Thieme Verlag: Stuttgart, 298 S.
Harada, H., Davies, G. W., Plomley, K. F. 1968. Wood structure and adhesion in plywood. Forest Prod. J. 18 (2): 86–90
Harada, H., Furukawa, J. 1972. An electron microscopic observation on the thermal deterioration of glue line in wood. Bull. Kyoto Univ. For. 43: 320–327
Köhler, R. 1972. Physikalische Grundlagen der Klebevorgänge. Adhäsion 16: 41–47
Koran, Z., Vasishth, R. C. 1972. Scanning electron microscopy of plywood glue lines. Wood Fiber 3: 202–209
Kühne, G., Uhlmann, U. 1976. Zu einigen grenzflächenenergetischen Problemen bei der Adhäsion von Holz und Plasten. II. Holztechnologie 17: 203–208
Lehmann, W. F. 1968. Resin distribution in flakeboard shown by ultraviolet light photography. Forest Prod. J. 18 (10): 32–34
Lundquist, K. E., Back, E. L. 1977. The use of bark for wood based panels—a critical evaluation. Svensk Papperstid. 80: 309–316
Maloney, T. M. 1973. Bark boards from four west coast softwood species. Forest Prod. J. 23 (8): 30–38
Marian, J. E., Suchsland, K. 1957. Experimental investigation of gluing and finishing problems through application of fluorescence microscopy in incident light. Forest Prod. J. 7 (2): 74–77
Parameswaran, N., Kruse, J., Liese, W. 1976. Aufbau und Feinstruktur von Periderm und Lenticellen der Fichtenrinde. Z. Pflanzenphysiol. 77: 212–221
Place, T. A., Maloney, T. M. 1977. Internal bond and moisture response properties of three-layer wood-bark boards. Forest Prod. J. 27 (3): 50–54
Plath, E., Plath, L. 1959. Färbemethoden für Mikrotomschnitte aus verleimten und oberflächenbehandelten Holzwerkstoffen. Holz Roh-Werkstoff 17: 245–249
Reynolds, E. S. 1963. The use of lead citrate at high pH as an electron opaque stain in electron microscopy. J. Cell Biol. 17: 208–213
Roy, D. C., Chowdhury, S., Chaudhuri, S. 1973. Identification of glue in plywood glue line. IPIRI J. 3: 88–95
Saiki, H., Goto, T., Sakuno, T. 1975. Scanning electron microscopy of glue lines separated from plywood. J. Jap. Wood Res. Soc. 21: 283–288
Smith, L. A. 1971. Resin penetration of wood cell walls implication for adhesion of polymers to wood. Ph. D. Thesis State Univ. N.Y. Coll. For., Syracuse, N.Y.
Smith, L.-A., Côté, W. A. 1971. Studies of penetration of phenol-formaldehyde resin into wood cell walls with the SEM and energydispersive x-ray analyzer. Wood Fiber 3: 56–57
Spurr, A. R. 1969. A low-viscosity epoxy resin embedding medium for electron microscopy. J. Ultrastr. Res. 26: 31–43
Volz, K. R. 1974. Untersuchungen über die Eigenschaften der Rinden von Fichte, Kiefer und Buche und ihre Eignung als Rohstoff für Flachpreßplatten. Diss. Univ. Göttingen
Wagenführ, R. 1969. Elektronenmikroskopische Untersuchungen der Struktur von Grenz- und Oberflächen in der Holztechnik. Holztechnologie 10: 37–40
Wattendorff, J. 1974. Ultrahistochemical reaction of the suberized cell walls in Acorus. Acacia and Latrix. Z. Pflanzenphysiol. 73: 214–225
Wellons, J. D., Krahmer, R. L. 1973. Self bonding in bark composites. Wood Sci. 6: 112–122
White, M. S., Ifju, G., Johnson, J.A. (1977. Method for measuring resin penetration into wood. Forest Prod. J. 27 (7): 52–54
Wilson, J. B., Krahmer, R. L. 1976. Particleboard: microscopic observations of resin distribution and board fracture.. Forest Prod. J. 26 (11): 42–45
Wittmann, O. 1976. Die Holzverklebung mit Isocyanat. Holz Roh-Werkstoff 34: 427–431
Wittmann, O., Lehnert, H. 1974. Diisocyanate als Bindemittel. Holz-Zbl. 100: 913–915
Zündorf, R. 1967. Erfahrung mit der Tesafilm-Methode beim Schneiden schwieriger Objekte. Mikrotomnachrichten 4: 130–133
Author information
Authors and Affiliations
Additional information
Für die Bereitstellung des Untersuchungsmaterials danken wir Herrn Priv.-Doz. Dr.-Ing. E. Roffael, Wilhelm-Klauditz-Institut für Holzforschung, Braunschweig, und Herrn Dr. S. Chow, Western Forest Prod. Laboratory, Vancouver, Canada. Für ihre Hilfe seien Frau R. Schultze (TEM) sowie Frau K. Hoffmann und Herrn Dr. D. Keyser (REM), Zool. Institut der Universität Hamburg, gedankt
Rights and permissions
About this article
Cite this article
Kruse, J., Parameswaran, N. Mikrotechnologische Untersuchungen an Rindenplatten. Holz als Roh-und Werkstoff 36, 225–233 (1978). https://doi.org/10.1007/BF02607704
Issue Date:
DOI: https://doi.org/10.1007/BF02607704