Skip to main content
Log in

Elektronik in der Holzbearbeitung

Teil 1: Vom Mikroprozessor zur CNC-Steuerung

Electronics in wood working

Part 1: From Microprocessor to CNC-Control Systems

  • Forschung und Praxis
  • Published:
Holz als Roh- und Werkstoff Aims and scope Submit manuscript

Zusammenfassung

Elektronische Steuerungen sind in zunehmendem Maße an Maschinen für die Holzbearbeitung zu finden. In einer dreiteiligen Aufsatreihe soll deshalb das Gebiet der angewandten Elektronik umrissen und, wo notwendig, detailliert beschrieben werden. Der vorliegende erste Teil beleutchtet den Weg vom Mikroprozessor zur CNC-Steuerung. Die wichtigsten Systembegriffe werden dargestellt, der Aufbau eines Mikrocomputers und die Arbeitsweise eines Mikroprozessors, ebenso wie duale und sedezimale Zahlensysteme werden erklärt. Die nachfolgend veröffentlichten Teile werden sich mit der Entwicklung der NC-Technik an Werkzeugmaschinen und mit CNC-Steuerungen in der Holzbearbeitung, erläutert am Beispiel einer automatischen Oberfräse, befassen.

Electronically operated controls are increasingly found in wood working machines. In a series of three papers, the field of applied electronics will therefore be described and, where necessary be discussed in greater detail. The first part, published here, points out the way which led from the microprocessor to CNC-controlled systems. The most important terms of this system are depieted. The construction of a microcomputer and the operational pattern of a microptocessor as well as dual and sedecimal numeric systems are focussed. The consecutively published parts will report on the development of numerical-control in machine-tools and on CNC-controlled systems for wood working machinery: the latter will be exemplified by an automatically operating router.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Literatur

  • Anonymus 1977: Mikroprozessoren. Elektronik Sonderausgabe. München: Franzis Verlag

  • Siemens AG (1976/77) Mikroprozessor-Bausteine. Siemens Datenbuch 1976/77. München: Siemens AG, Bereich Bauelemente

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Beil, H., Renner, H. Elektronik in der Holzbearbeitung. Holz als Roh-und Werkstoff 40, 445–448 (1982). https://doi.org/10.1007/BF02606912

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02606912

Navigation