Abstract
An Illinois coal ash, which has metals and a large amount of iron, is considered to be an especially difficult waster for disposal. In the process described in this paper, the high iron and metal content is used to create a building material with special properties. The metals are sequestered. The metals allow a process that creates valueadded products, building materials.
The products are inexpensively prepared colored, strong, lightweight insulative structural panels. By either sintering in an oven at 725°C or by adding a flux and sintering at 525°C, panels are produced which will not leach metals from the ash. The use of an acid with the fly ash as a flux was investigated in comparison with fly ash control samples. The effects of sintering samples at different temperatures and with or without vacuum were also observed. Properties of the samples, including values for strength, water absorption, insulation, and color, are presented from this study.
Résumé
Une cendre de charbon de l'Illinois, qui a des métaux et une grande quantité de fer, est considérée comme un déchet particulièrement difficile à éliminer. Dans le processus décrit par cette étude, la teneur élevée en fer et en métal est utilisée pour créer un matériau de construction avec des propriétés spéciales. Les métaux sont isolés. Les métaux permettent un processus qui crée de la valeur ajoutée.
Les produits sont des panneaux structuraux isolés, colorés, forts et légers qui sont préparés à peu de frais. On produit des panneaux qui ne lixivieront pas les métaux de la cendre par une concrétion dans un four à 725 degrés Celsius, ou bien par une concrétion à 525 degrés Celsius, en ajoutant un flux. L'utilisation d'un acide avec la cendre en l'air comme flux a été étudiée en comparaison avec des échantillons témoins de cendres flottantes dans l'air. On a également observé les effets de concrétionnement des échantillons à différentes températures avec ou sans vide. Les propriétés des échantillons, y compris les indices pour la solidité, l'absorption de l'eau, l'isolation, et la couleur, sont présentées dans cette étude.
Similar content being viewed by others
References
Valenti, M., ‘Using fly ash for construction,’Mechanical Engineering 117 (5) (1995) 82–86.
Wei, L., Naik, T.R. and Golden, D.M., ‘Construction materials made with coal combustion by-products’,Cement, Concrete and Aggregates 16 (1) (1994) 36–42.
Beretka, J., Cioffi, R., Santoro, L. and Valenti, G., ‘Cementitious mixtures containing industrial process wastes suitable for the manufacture of preformed building elements’,Journal of Chemical Technology and Biotechnology 59 (3) (1994) 243–247.
Askhedkar, R.D. and Modak, J.P., ‘Hypothesis for the extrusion of lime-fly ash-sand bricks using a manually driven brickmaking machine’,Building Research and Information 22 (1) (1994) 47–54.
Sevelius, D., ‘Bricks by recycling-product design based on waste’,Key Engineering Materials 132–136 (3) (1997) 2272–2275.
Freidin, K. and Erell, E., ‘Bricks made of coal fly ash and slag, cured in open air’,Cement & Concrete Composites 17 (4) (1995) 289–300.
Yildirim, M.S., Bicer, Y. and Yildiz, C., ‘Utilization of fly ash and polypropylene wastes in the production of a new porous composite material’,Journal of Porous Materials 3 (3) (1996) 189–191.
Alkan, C., Arslan, M., Cici, M., Kaya, M. and Aksoy, M., ‘Study on the production of a new material from fly ash and polyethylene’,Resources Conservation & Recycling 13 (3–4) (1995) 147–154.
Li, Y., White, D.J. and Peyton, R.L., ‘Composite material from fly ash and post-consumer PET’,Resources Conservation & Recycling 24 (2) (1998) 87–93.
Joshi, R.C., Thomas, J.O. and Adam, R.B., ‘Properties of gypsum wallboards containing fly ash’,Journal of Materials in Civil Engineering 4 (2) (1992) 212–225.
Dry, C., ‘Characterization of two sintered fly ash/acid composites’,Canadian Ceramics Quarterly/Journal of the Canadian Ceramic Society 63 (1) (1994) 54–58.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Dry, C., Meier, J. & Bukowski, J. Sintered coal ash/flux materials for building materials. Mat. Struct. 37, 114–121 (2004). https://doi.org/10.1007/BF02486607
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02486607