Abstract
Using the single crack solution and the regular solution of plane harmonic function, the problem of Saint-Venant bending of a cracked cylinder by a transverse force was reduced to solving two sets of integral equations and its general solution was then obtained. Based on the obtained solution, a method to calculate the bending center and the stress intensity factors of the cracked cylinger whose cross-section is not thin-walled, but of small torsion rigidity is proposed. Some numerical examples are given.
Similar content being viewed by others
References
Timoshenko S, Gere J.Mechanics of Materials [M]. HU Li-ren transl. Beijing: Science Press, 1978. (Chinese version)
CHIEN Wei-zang, LIN Hong-sun, HU Hai-chang, et al.Theory of Elastic Cylinder [M]. Beijing: Science Press, 1956. (in Chinese)
Muskhelishviei N I.Some Basic Problems of the Mathematical Theory of Elasticity [M]. Groningen-Holland: P. Noordhooff Ltd Press, 1953.
TANG Ren-ji, CHEN Wei-jiang. Boundary element method to solve torsion problem of cracked cylinder [J].Acta Mechanica Solids Sinica, 1990,3 (4): 447–455.
TANG Ren-ji. Bending torsion of circular cylinder with radial crack system [J].Acta Mechanica Solida Sinica, 1983, (3): 341–353. (in Chinese)
Author information
Authors and Affiliations
Additional information
Paper from TANG Rei-ji, Member of Editorial Committee, AMM
Biography: TANG Ren-ji (1935-), Professor
Rights and permissions
About this article
Cite this article
Ren-ji, T., Xin-yan, T. Method to calculate bending center and stress intensity factors of cracked cylinder under saint-venant bending. Appl Math Mech 22, 79–88 (2001). https://doi.org/10.1007/BF02437946
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02437946