Summary
Many experimental observations have shown the influences of particle size on the mechanical propertics of the particle-reinforced metal-matrix composite. However, the conventional theory cannot explain the phenomena because no length scale parameters are included in the conventional theory. In the present paper, the strain gradient theory proposed by Chen and Wang [32] is used, and a systematic research of the particle size effect in the particle-reinforced metal-matrix composite is carried out. Many composite factors, such as the particle size, the particle aspect ratio, the Young's modulus ratio of the particle to the matrix material, particle volume fraction and the strain hardening exponent of the matrix material, are investigated in detail. Two kinds of particle shapes, spheroidal particle and cylindrical particle, are considered to check the strength dependence of the particle shapes. Calculation to the special materials used by Ling [9] has been done, and the calculation results are consistent with the experimental results in Ling [9]. The material length scale parameter is predicted.
Similar content being viewed by others
References
Christman, T., Needleman, A., Suresh, S.: An experimental and numerical study of deformation in metal ceramic composites. Acta Metall. Mater.37, 3029–3050 (1989).
Bao, G., Hutchinson, J. W., McMeeking, R. M.: Particle reinforcement of ductile matrices against plastic flow and creep. Acta Metall. Mater.39, 1871–1882 (1991).
Corbin, S. F., Wilkinson, D. S.: The influence of particle distribution on the mechanical response of a particulate metal-matrix composite. Acta Metall. Mater.42, 1311–1318 (1994).
Boland, F., Colin, C., Salmon, C. et al.: Tensile flow properties of Al-based matrix composites reinforced with a random planar network of continuous metallic fibers. Acta Mater.46, 6311–6323 (1998).
Yang, J., Cady, C., Hu, M. S. et al.: Effects of damage on the flow strength and ductility of a ductile Al-alloy reinforced with SiC particulates. Acta Metall. Mater.38, 2613–2619 (1990).
Kamat, S. V., Rollett, A. D., Hirth, J. P.: Plastic-deformation in Al-alloy matrix-alumina particulate composites. Scripta Metall. Mater.25, 27–32 (1991).
Lloyd, D. J.: Particle-reinforced aluminum and magnesium matrix composite. Int. Mater. Rev.39, 1–23 (1994).
Kiser, M. T., Zok, F. W., Wilkinson, D. S.: Plastic flow and fracture of a particulate metal matrix composite. Acta Mater.44, 3465–3476 (1996).
Ling, Z.: Deformation behavior and microstructure effect in 2124Al/SuCp composite. J. Comp. Mater.34, 101–115 (2000).
Nan, C. W., Clarke, D. R.: The influence of particle size and particle fracture on the elastic/plastic deformation of metal matrix composites. Acta Mater.44, 3801–3811 (1996).
Maire, E., Wilkinson, D. S., Embury, D. et al.: Role of damage on the flow and fracture of particulate reinforced alloys and metal matrix composites. Acta Mater.45, 5261–5274 (1997).
Ma, Q., Clarke, D. R.: Size dependent hardness in silver single crystals. J. Mat. Res.10, 853–863 (1995).
Fleck, N. A., Muller, G. M., Ashby, M. F., Hutchinson, J. W.: Strain gradient plasticity: theory and experiment. Acta Metall. Mater.42, 475–487 (1994).
Stolken, J. S., Evans, A. G.: A microbend test method for measuring the plasticity length scale. Acta Mater.46, 5109–5115 (1998).
Elssner, G., Korn, D., Ruehle, M.: The influence of interface impurities on fracture energy of UHV diffusion bonded metal-ceramic bicrystals. Scripta Metall. Mater.31, 1037–1042 (1994).
Fleck, N. A., Hutchinson, J. W.: A phenomenological theory for strain gradient effects in plasticity. J. Mech. Phys. Solids41, 1825–1857 (1993).
Fleck, N. A., Hutchinson, J. W.: Strain gradient plasticity. Adv. Appl. Mech.33 (Hutchinson, J. W., Wu, T. Y., eds.), pp. 295–361. New York: Academic Press 1997.
Gao, H., Huang, Y., Nix, W. D., Hutchinson, J. W.: Mechanism-based strain gradient plasticity-I: theory. J. Mech. Phys. Solids47, 1239–1263 (1999).
Wei, Y., Hutchinson, J. W.: Steady-state crack growth and work of fracture for solids characterized by strain gradient plasticity. J. Mech. Phys. Solids45, 1253–1273 (1997).
Wei, Y.: Particulate size effects in the particle-reinforced metal-matrix composites. Acta Mech. Sin.17, 45–58 (2001).
Shu, J. Y., Fleck, N. A.: Strain gradient crystal plasticity: size-dependent deformation of bicrystals. J. Mech. Phys. Solids47, 292–324 (1999).
Shu, J. Y., Barlow, L. Y.: Strain gradient effects on microscopic strain field in a metal matrix composite. Int. J. Plast.16, 563–591 (2000).
Bassani, J. L., Needleman, A., Giessen, E. Van Der: Plastic flow in a composite: a comparison of nonlocal continuum and discrete dislocation predictions. Int. J. Solids Struct.38, 833–853 (2001).
Nix, W. D., Gao, H.: Indentation size effects in crystalline materials: a law for strain gradient plasticity. J. Mech. Phys. Solids46, 411–425 (1998).
Acharya, A., Shawki, T. G.: Thermodynamic restrictions on constitutive equations for second-deformation-gradient inelastic behavior. J. Mech. Phys. Solids43, 1751–1772 (1995).
Aifantis, E. C.: On the microstructural origin of certain inelastic models. Trans. ASME J. Eng. Mater. Technol.106, 326–330 (1984).
Muhlhaus, H. B., Aifantis, E. C.: The influence of microstructure-induced gradients on the localization of deformation in viscoplastic materials. Acta Mech.89, 217–231 (1991).
Zbib, H., Aifantis, E. C.: On the localization and postlocalization behavior of plastic deformation. Part I. On the initiation of shear bands. Part II. On the evolution and thickness of shear bands. Part III. On the structure and velocity of Portevin-Le Chatelier bands. Res. Mech. 261–277, 279–292, 293–305 (1989).
Zbib, H., Aifantis, E. C.: On the gradient-dependent theory of plasticity and shear banding. Acta Mech.92, 209–225 (1992).
Acharya, A., Bassani, J. L.: On non-local flow theories that preserve the classical structure of incremental boundary value problems. In: Micromechanics of plasticity and damage of multiphase materials. IUTAM Symposium, Paris, August 29–September 1, 1995.
Chen, S. H., Wang, T. C.: A new hardening law for strain gradient plasticity. Acta Mat.48, 3997–4005 (2000).
Chen, S. H., Wang, T. C.: A new deformation theory for strain gradient effects. Int. J. Plast. (forthcoming 2002).
Chen, S. H., Wang, T. C.: Mode I crack tip with strain gradient effect. Acta Mech. Solida Sin.13, 290–298 (2000).
Chen, S. H., Wang, T. C.: Mode I and Mode II crack tip asymptotic fields with strain gradient effects. Acta Mech. Sin.17, 269–280 (2001).
Chen, S. H., Wang, T. C.: Finite element solutions for plane strain mode I crack with strain gradient effects. Int. J. Solids Struct. (forthcoming 2002).
Chen, S. H., Wang, T. C.: A study of size-dependent microindentation test., (forthcoming).
Smyshlyaev, V. P., Fleck, N. A.: The role of strain gradients in the grain size effect for polycrystals. J. Mech. Phys. Solids44, 465–495 (1996).
Shu, J. Y., Fleck, N. A.: The prediction of a size effect in microindentation. Int. J. Solids Struct.35, 1363–1383 (1998).
Xia, Z. C., Hutchinson, J. W.: Crack tip fields in strain gradient plasticity. J. Mech. Phys. Solids44, 1621–1648 (1996).
Shu, J. Y., King, W. E., Fleck, N. A.: Finite elements for materials with strain gradient effects. Int. J. Numer. Methods Eng.44, 373–391 (1999).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Chen, S.H., Wang, T.C. Size effects in the particle-reinforced metal-matrix composites. Acta Mechanica 157, 113–127 (2002). https://doi.org/10.1007/BF01182158
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01182158