Abstract
Cork dust was consolidated without additives by heating under pressure. Four engineering properties of the compacted cork were measured: density, modulus, strength and fracture toughness. The thermal conductivity and the absorption of water by the compacted cork were also measured. The properties depend on the consolidation conditions, and (in a way which is not yet understood) on the origin of the cork dust itself, but not on particle size. The properties are compared with those of other common materials to identify possible uses.
Similar content being viewed by others
References
J. V. Natividade, “Subericultura” (National Agronomics Institute. Ministry of Economics, Forestry Service, Lisbon, 1950).
L. J. Gibson, K. E. Easterling and M. F. Ashby, Proc. R. Soc. Lond. A377 (1981) 99.
M. E. Rosa and M. A. Fortes, J. Mater. Sci. Lett. 7 (1988) 1064.
H. Pereira, M. E. Rosa and M. A. Fortes, Int. Ass. Wood Anatomists Bull. 8 (1987) 213.
P. T. Lewis, Science 68 (1928) 635.
L. J. Gibson and M. F. Ashby, “Cellular Solids” (Pergamon Press, Oxford, 1987).
A. Guillemonat, Ann. Fac. Sci. Marseille 30 (1960) 43.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Flores, M., Rosa, M.E., Barlow, C.Y. et al. Properties and uses of consolidated cork dust. J Mater Sci 27, 5629–5634 (1992). https://doi.org/10.1007/BF00541634
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00541634