Abstract
Tensile tests were carried out at room temperature on 6061-aluminium alloy reinforced with SiC and Al2O3 particulates. Although a significant increase in strength could be achieved by introducing ceramic reinforcements into the aluminium alloy matrix, it is associated with a substantial decrease in fracture strain. In order to understand the reason for the inferior ductility of such composites, analytical solutions were obtained using a simple composite model. SEM studies were carried out on the side surfaces of the fractured specimens to verify the proposed failure behaviour. Failure modes observed to operate in such composites under uniaxial tension are described.
Similar content being viewed by others
References
N. Tsangarakis, B. O. Andrews and C. Cavallaro, J. Compos. Mater. 21 (1987) 481.
T. G. Nieh and D. J. Chellman, Scripta Metall. 18 (1984) 925.
R. J. Arsenault and S. B. Wu, ibid. 22 (1988) 767.
R. J. Arsenault, Mater. Sci. Engng 64 (1981) 171.
Y. Flom and R. J. Arsenault, J. Metals 38 (1986) 31.
V. C. Nardone, Scripta Metall. 21 (1987) 1313.
R. H. Jones, C. A. Lavender and M. T. Smith, ibid. 21 (1987) 1565.
W. A. Longsdon and P. K. Liaw, Engng Fract. Mech. 24 (1986) 737.
T. Christman and S. Suresh, Mater. Sci. Engng 102 (1988) 211.
J. K. Shang, W. Yu and R. O. Ritchie, ibid. 102 (1988) 818.
F. M. Hosking, F. F. Portillo, R. Wunderlin and R. Mehrabian, J. Mater. Sci. 17 (1982) 477.
F. A. Girot, J. M. Quenisset and R. Naslain, Compos. Sci. Technol. 30 (1987) 155.
V. C. Nardone and J. R. Strife, Metall. Trans. 18A (1987) 109.
K. S. Ravichandran, J. Metals 39 (1987) 28.
J. J. Stephens, J. P. Lucas and F. M. Hosking, Scripta Metall. 22 (1988) 1307.
D. L. McDanels, Met. Trans. 16A (1985) 1105.
R. J. Arsenault and S. B. Wu, Mater. Sci. Engng 96 (1987) 77.
A. K. Vasudevan, O. Richmond, F. Zok and J. D. Emburg, ibid. A107 (1989) 63.
H. Ohtsu, “Design and manufacturing of advanced composites” (ASM, Detroit, 1989) p. 187.
D. J. Lloyd, H. Lagace, A. McLeod and P. L. Morris, Mater. Sci. Engng A107 (1989) 73.
S. R. Nutt and J. M. Duva, Scripta Metall. 20 (1986) 1055.
S. R. Nutt and A. Needleman, ibid. 21 (1987) 705.
J. J. Lowandowski, C. Liu and W. H. Hunt, Mater. Sci. Engng 107A (1989) 241.
C. P. You, A. W. Thompson and I. M. Bernstein, Scripta Metall. 21 (1987) 181.
T. Christman, A. Needleman, S. Nutt and S. Suresh, Mater. Sci. Engng 107A (1989) 49.
G. M. Janowski and B. J. Pletaka, ibid. A129 (1990) 65.
N. I. Muskhelishvili, “Some basic problems of the mathematical theory of elasticity” (Noordhoff, Groningen, Holland, 1953) pp. 215–16.
Y. S. Touloukian (ed.) “Thermophysical properties of high temperature solid materials, Vol. 6, part I (Thermophysical properties research center, Purdue University, 1967).
Y. Flom and R. J. Arsenault, Mater. Sci. Engng 77 (1986) 191.
T. Iseki, T. Kameda and T. Maruyama, J. Mater. Sci. 19 (1984) 1692.
R. J. Arsenault and M. Taya, Acta Metall. 35 (1987) 651.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lee, J.C., Subramanian, K.N. Failure behaviour of particulate-reinforced aluminium alloy composites under uniaxial tension. J Mater Sci 27, 5453–5462 (1992). https://doi.org/10.1007/BF00541606
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00541606