Abstract
For reinforcement with high strength C fibres, the optimized preparation parameters of two glass ceramics in the system MgO-Al2O3-SiO2 (MAS) and BaO-MgO-Al2O3SiO2 (BMAS) were investigated. The optimized preparation is related mainly to the mechanical properties of composites having a high portion of crystalline matrix microstructure. As a first step, the temperature ranges were determined at which the glass matrix crystallizes to a high degree. The optimized mechanical properties of the composites were obtained by systematic variation of the temperature-pressure profile for the densification of the prepregs. The best results were obtained by densifying the composition of each composite in the glass temperature region, T g, before the matrix started to crystallize. Optima mechanical properties exist also for composite fibre concentrations observed in the range of 31–33 vol%.
Similar content being viewed by others
References
R. A. J. Sambell, A. Briggs, D. C. Phillips and D. H. Bowen, J. Mater. Sci. 7 (1972) 663 and 676.
R. A. J. Sambell, D. C. Phillips and D. H. Bowen, in “Proceedings of the International Conference” (Plastic Institution, London, 1974) pp. 105–113.
S. R. Levitt, J. Mater. Sci. 8 (1973) 793.
K. R. Linger and A. G. Pratchett, Composites 8 (1977) 139.
K. M. Prewo and E. R. Thompson, NASA Contractor Report 165711, Final Report, March 1970–February 1981, Contract NAS1-14346, May 1981 UTRC, East Hartford, USA.
T. Klug, H. Bornhöft and R. Brückner, Glastech. Ber. 65 (1992) 207.
T. Klug and R. Brückner, ibid. 65 (1992) 299.
T. Klug, V. Fleischer and R. Brückner, ibid. 66 (1993) 201.
C. Reich and R. Brückner, ibid. submitted.
H. Hegeler and R. Brückner, J. Mater. Sci. 24 (1989) 1191.
F. Chung, J. Appl. Crystallog. 7 (1974) 519.
W. Schreyer and J. F. Schairer, Z. Kristallogr. 116 (1961) 60.
T. Hübert, R. Müller and M. Kirsch, Silikatt. 39 (1988) 183.
R. Müller, J. Thermal Anal. 35 (1989) 823.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Reinsch, S., Reich, C. & Brückner, R. Optimized preparation parameters of unidirectionally C fibre-reinforced glass ceramics of the systems MAS and BMAS. JOURNAL OF MATERIALS SCIENCE 30, 5632–5638 (1995). https://doi.org/10.1007/BF00356696
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00356696