Abstract
Pull-out of a ductile fibre from a brittle matrix has been analysed using a shear lag model. Debonding at the fibre-matrix interface and yielding of the fibre occurred during the pull-out process. Both Poisson's contraction of the fibre and Coulomb friction of the debonded interface were considered. The debond length, which consists of an elastic zone length and a plastic zone length, was also analysed. When the fibre has a finite embedded length, it was found that necking prior to full pull-out of the fibre was required to optimize the toughening of a brittle matrix due to plastic deformation of the fibres. The essential material properties to achieve this are addressed.
Similar content being viewed by others
References
P. Hing and G. W. Groves, J. Mater. Sci. 1 (1972) 427.
V. V. Kristic, P. S. Nicholson and R. G. Hoagland, J. Am. Ceram. Soc. 64 (1981) 499.
D. Han and J. J. Mecholsky, J. Mater. Sci. 25 (1990) 4949.
L. S. Sigl and H. E. Exner, Metall. Trans. 18A (1987) 1299.
F. Erdogan and P. F. Joseph, J. Am. Ceram. Soc. 72 (1989) 262.
H. E. Deve, A. G. Evans, G. R. Odette, R. Mehrabian, M. L. Emiliani and R. J. Hecht, Acta Metall. Mater 38 (1990) 1491.
L. Xiao and R. Abbaschian, Mater. Sci. Eng. A155 (1992) 135.
T. C. Lu, A. G. Evans, R. J. Hecht and R. Mehrabian, Acta Metall Mater. 39 (1991) 1853.
M. Bannister and M. F. Ashby, ibid. 39 (1991) 2575.
M. F. Ashby, F. J. Blunt and M. Bannister, ibid. 37 (1989) 1847.
M. Bannister, H. Shercliff, B. Gao, F. Zok and M. F. Ashby, ibid. 40 (1992) 1531.
J. Bowling and G. W. Groves, J. Mater. Sci. 14 (1979) 431.
Idem, ibid. 14 (1979) 443.
H. C. Cao, B. J. Dalgleish, H. E. Deve, C. Elliott, A. G. Evans, R. Mehrabian and G. R. Odette, Acta Metall. Mater. 37 (1989) 2969.
H. E. Deve and M. J. Maloney, ibid. 39 (1991) 2275.
H. L. Cox, Br. J. Appl. Phys. 3 (1952) 72.
P. Lawrence, J. Mater. Sci. 7 (1972) 1.
A. Takaku and R. G. C. Arridge, J. Phys. D Appl. Phys. 6 (1973) 2038.
M. R. Piggott, “Load Bearing Fiber Composites” (Pergamon Press, Elmsford, NY, 1980) p. 62.
B. Budiansky, J. W. Hutchinson and A. G. Evans, J. Mech. Phys. Solids 34 (1986) 167.
Y. C. Gao, Y. W. Mai and B. Cotterell, J. Appl. Math. Phys. (ZAMP) 39 (1988) 550.
D. K. Shetty, J. Am. Ceram. Soc. 71 (1988) C107.
R. J. Kerans and T. A. Parthasarathy, ibid. 74 (1991) 1585.
C. H. Hsueh, Mater. Sci. Eng. A125 (1990) 67.
Idem, ibid. A154 (1992) 125.
P. A. Mataga, Acta Metall. 37 (1989) 3349.
W. C. Carter, E. P. Butler and E. R. Fuller v, Scripta Metall. Mater. 25 (1991) 579.
P. D. Jero and R. J. Kerans, ibid. 24 (1990) 2315.
T. J. Mackin, P. D. Warren and A. G. Evans, Acta Metall. Mater. 40 (1992) 1251.
J. P. Outwater and M. C. Murphy, in “Proceedings of the 24th Annual Technical Conference of Reinforced Plastic Composites Division”, (The Society of the Plastics Industry Inc., New York, 1969) p. 11c.
J. W. Hutchinson and H. M. Jensen, Mech. Mater. 9 (1990) 139.
C. H. Hsueh, Mater. Sci. Eng. A145 (1990) 135.
C. H. Hsueh, Mater. Sci. Eng. A123 (1990) 1.
R. Hill, “The Mathematical Theory of Plasticity” (Clarendon Press, Oxford, 1950).
C. H. Hsueh and A. G. Evans, J. Am. Ceram. Soc. 68 (1985) 120.
C. H. Hsueh and P. F. Becher, ibid. 71 (1988) C438.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hsueh, CH. Pull-out of a ductile fibre from a brittle matrix. Journal of Materials Science 29, 4793–4801 (1994). https://doi.org/10.1007/BF00356525
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00356525