Abstract
In situ observations of specimen surfaces have been used to characterize the fracture behaviour of particulate-reinforced metal-matrix composites. Composites of silicon carbide particle sizes 3, 10 and 30 μm with volume fractions of 5, 10 and 20% in commercial-purity aluminium and aluminium-1% magnesium matrices were studied. The results of this surface study are compared with complementary metallographic studies of sectioned specimens illustrating behaviour from the bulk. Significant differences between the results of these two studies are outlined. Previous work using these techniques is critically examined and recommendations made for the appropriate interpretation of in situ straining experiments.
Similar content being viewed by others
References
D. J. LLOYD, in “Metal Matrix Composites-Processing, Microstructure and Properties”, edited by N. Hansen, D. Juul Jensen, T. Leffers, H. Lilholt, T. Lorentzen, A. S. Pedersen, O. B. Pedersen and B. Ralph (Risø National Laboratory, Roskilde, Denmark, 1991) p. 81.
F. A. GIROT, J. M. QUENISSET and R. NASLAIN, Comp. Sci. Tech. 30 (1987) 155.
B. ROEBUCK, J. Mater. Sci. Lett. 6 (1987) 1138.
J. J. LEWANDOWSKI, C. LIU and W. H. HUNT Jr, Mater. Sci. Eng. A107 (1989) 241.
M. STRANGWOOD, C. A. HIPPSLEY and J. J. LEWANDOWSKI, Scripta Metall. Mater. 24 (1990) 1483.
P. M. MUMMERY and B. DERBY, Mater. Sci. Eng. A135 (1991) 221.
J. YANG, C. CADY, M. S. HU, F. ZOK, R. MEHRABIAN and A. G. EVANS, Acta Metall. Mater. 38 (1990) 2613.
P. M. MUMMERY, B. DERBY and C. B. SCRUBY, ibid. 41 (1993) 1431.
S. B. WU and R. J. ARSENAULT, Mater. Sci. Eng. A138 (1991) 227.
S. B. WU and R. J. ARSENAULT, in “Fundamental Relations Between Microstructures and Mechanical Properties in Metal Matrix Composites”, edited by M. N. Gungor and P. K. Liaw (TMS, Warrendale, PA, 1989) p. 241.
M. MANOHARAN and J. J. LEWANDOWSKI, Scripta Metall. 23 (1989) 1801.
Idem., Scripta Metall. Mater. 24 (1990) 2357.
R. DaSILVA, D. CALDEMAISON and T. BRETHAU, in “Mechanical and Physical Behaviour of Metallic and Ceramic Composites”, edited by S. I. Anderson, H. Lilholt and O. B. Pedersen. (Risø National Laboratory, Roskilde, Denmark, 1988) p. 333.
H. RIBES, R. DaSILVA, M. SUERY and T. BRETHAU, Mater. Sci. Tech. in press.
P. M. MUMMERY and B. DERBY, in “Fundamental Relations Between Microstructures and Mechanical Properties in Metal Matrix Composites”, edited by M. N. Gungor and P. K. Liaw (TMS, Warrendale, PA, 1989) p. 16.
Idem., in “Metal Matrix Composites-Processing, Microstructure and Properties”, edited by N. Hansen, D. Juul Jensen, T. Leffers, H. Lilholt, T. Lorentzen, A. S. Pedersen, O. B. Pedersen and B. Ralph (Risø National Laboratory, Roskilde, Denmark, 1991) p. 535.
F. J. HUMPHREYS, in Proceedings of EMAG-MICRO89, (IOP Publishing Ltd., Bristol, UK, 1990) p. 465.
Y. H. KIM, S. LEE and N. J. KIM, Metall. Trans. 23A (1992) 2589.
D. J. LLOYD, Acta Metall. Mater. 39 (1991) 59.
A. F. WHITEHOUSE and T. W. CLYNE, Composites 24 (1993) 256.
B. R. LAWN and A. R. WILSHAW, “Fracture of Brittle Solids” (Cambridge University Press, Cambridge, UK, 1975) p. 61.
J. H. TWEED, Mater. Sci. Eng. A135 (1991) 73.
C. W. LAWRENCE, P. M. MUMMERY and J. H. TWEED, J. Mater. Sci. Lett. 12 (1993) 647.
C. P. YOU, A. W. THOMPSON and I. M. BERNSTEIN, Scripta Metall. 21 (1987) 181.
S. H. GOODS and L. M. BROWN, Acta Metall. 27 (1979) 1.
C. F. MAN, P. M. MUMMERY, B. DERBY and M. L. JENKINS, in “Interfacial Phenomena in Composite Materials”, edited by I. Verpoest and F. Jones (Butterworth-Heinemann, Oxford, UK, 1991) p. 175.
J. K. SHANG, W. YU and R. O. RITCHIE, Mater. Sci. Eng. A102 (1988) 181.
J. K. SHANG and R. O. RITCHIE, Acta Metall. 37 (1989) 2267.
Idem., Metall. Trans. 20A (1989) 897.
S. V. KAMAT, J. P. HIRTH and R. MEHRABIAN, Acta Metall. 37 (1989) 2395.
C. R. CROWE, R. A. GRAY and D. F. HASSON, in Proceedings of ICCM-V, 1985, edited by W. C. Harrigan Jr., J. Strife, A. K. Dhingra. (TMS, Warrendale, PA, 1985) p. 16.
J. W. HUTCHINSON, J. Mech. Phys. Sol. 16 (1968) 13.
J. R. RICE and G. R. ROSENGREN, ibid. 16 (1968) 1.
J. R. RICE and M. A. JOHNSON, in “Inelastic Behaviour of Solids”, edited by M. F. Kanninen et al. (McGraw-Hill, New York, 1969) p. 641.
R. M. McMEEKING, J. Mech. Phys. Sol. 24 (1977) 357.
L. SHOUXIN, S. LIZHI, S. ZHENGMING and W. ZHONGGUANG, Scripta Metall. Mater. 25 (1991) 2431.
P. M. MUMMERY, B. DERBY, J. COOK and J. H. H. TWEED, in Proceedings of 2nd European Conference on Advanced Materials and Processes vol. 2, edited by T. W. Clyne and P. J. Withers (Institute of Materials, London, 1992) p. 92.
B. DERBY, D. HILLS and C. RUIZ, “Materials for Engineering” (Longman Scientific and Technical, Harlow, UK) p. 120.
Y. BRECHET, J. D. EMBURY, S. TAO and L. LUO, Acta Metall. Mater. 39 (1991) 1781.
T. MOCHIDA, M. TAYA and D. J. LLOYD, Mater. Trans. Jap. Inst. Met. 32 (1991) 931.
P. M. MUMMERY, D.Phil. thesis, University of Oxford (1991).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mummery, P.M., Derby, B. In situ scanning electron microscope studies of fracture in particulate-reinforced metal-matrix composites. JOURNAL OF MATERIALS SCIENCE 29, 5615–5624 (1994). https://doi.org/10.1007/BF00349956
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00349956