Advertisement

Preparation and electrochemical capacitive properties of C–MnO2 composite with foam-like structure based on modified rubber

  • Peng Li
  • Xiaoxiao Ma
  • Yurong LiangEmail author
  • Junhua Tan
  • Liyong Wang
Original Article
  • 4 Downloads

Abstract

Nanoporous carbon/MnO2 (C–MnO2) composites with foam-like structure based on modified nitrile butadiene rubber were achieved by thermal treatment, followed by alkaline solution etching and dipping method. The XRD, nitrogen adsorption and desorption, and SEM and TEM were used to characterize the microstructure of the obtained C–SiO2, C and C–MnO2. Finally, all the obtained samples have been used in three-electrode system to study the electrochemical properties including cyclic voltammetry, galvanostatic charge/discharge and AC impedance for supercapacitor. The study found that the specific capacity of C–MnO2 electrode material for supercapacitor could reach as high as 109 F/g under the current density of 0.5 A/g, which is much higher than those of the other two. These superior electrochemical properties are attributed to the synergistic effect MnO2 particles with the C matrix which functions as a conductive support.

Keywords

Nanoporous carbons Alkali etching Foam-like structure Electrochemical performance 

Notes

Acknowledgements

The research was supported by the financial support of the Shanxi Province Foundation for Youths (2015021072), the Program for the Innovative Talents of Taiyuan Institute of Technology (TITXD201403), Special Youth Science and Technology Innovation (QKCZ201635) and the Fund for Shanxi “1331 Project” Key Subjects Construction.

References

  1. 1.
    Chung HT, Cullen DA, Higgins D, Sneed BT, Holby EF, More KL, Zelenay P (2017) Direct atomic-level insight into the active sites of a high-performance PGM-free ORR catalyst. Science 357:479–484CrossRefGoogle Scholar
  2. 2.
    Kaewruang S, Chiochan P, Phattharasupakun N, Suktha P, Kongpatpanich K, Maihom T, Limtrakul J, Sawangphruk M (2017) Strong adsorption of lithium polysulfides on ethylenediamine-functionalized carbon fiber paper interlayer providing excellent capacity retention of lithium-sulfur batteries. Carbon 123:492–501CrossRefGoogle Scholar
  3. 3.
    Zhang X, Sun X, Zhang H, Li C, Ma Y (2014) Comparative performance of birnessite-type MnO2 nanoplates and octahedral molecular sieve (OMS-5) nanobelts of manganese dioxide as electrode materials for supercapacitor application. Electrochim Acta 132:315–322CrossRefGoogle Scholar
  4. 4.
    Ma F, Zhao H, Sun L, Li Q, Huo L, Xia T, Gao S, Pang G, Shi Z, Feng S (2012) A facile route for nitrogen-doped hollow graphitic carbon spheres with superior performance in supercapacitors. J Mater Chem 22:13464CrossRefGoogle Scholar
  5. 5.
    Qorbani M, Naseri N, Moshfegh AZ (2015) Hierarchical Co3O4/Co(OH)2 nanoflakes as a supercapacitor electrode: experimental and semi-empirical model. ACS Appl Mater Interfaces 7:11172–11179CrossRefGoogle Scholar
  6. 6.
    Liu Y, Wang R, Yan X (2015) Synergistic effect between ultra-small nickel hydroxide nanoparticles and reduced graphene oxide sheets for the application in high-performance asymmetric supercapacitor. Sci Rep 5:11095–12006CrossRefGoogle Scholar
  7. 7.
    Shao Y, El-Kady MF, Lin CW, Zhu G, Marsh KL, Hwang JY, Zhang Q, Li Y, Wang H, Kaner RB (2016) 3D freeze-casting of cellular graphene films for ultrahigh-power-density supercapacitors. Adv Mater 28:6719–6726CrossRefGoogle Scholar
  8. 8.
    Tagade P, Hariharan KS, Basu S, Verma MKS, Kolake SM, Song T, Oh D, Yeo T, Doo S (2016) Bayesian calibration for electrochemical thermal model of lithium-ion cells. J Power Sources 320:296–309CrossRefGoogle Scholar
  9. 9.
    Deng J, Wang X, Duan X, Liu P (2015) Facile preparation of MnO2/graphene nanocomposites with spent battery powder for electrochemical energy storage. ACS Sustain Chem Eng 3:1330–1338CrossRefGoogle Scholar
  10. 10.
    Zhang J, Yang X, He Y, Bai Y, Kang L, Xu H, Shi F, Lei Z, Liu Z-H (2016) δ-MnO2/holey graphene hybrid fiber for all-solid-state supercapacitor. J Mater Chem A 4:9088–9096CrossRefGoogle Scholar
  11. 11.
    Xiao Z, Fan L, Xu B, Zhang S, Kang W, Kang Z, Lin H, Liu X, Zhang S, Sun D (2017) Green fabrication of ultrathin Co3O4 nanosheets from metal-organic framework for robust high-rate supercapacitors. ACS Appl Mater Interfaces 9:41827–41836CrossRefGoogle Scholar
  12. 12.
    Huang G, Zhang Y, Wang L, Sheng P, Peng H (2017) Fiber-based MnO2/carbon nanotube/polyimide asymmetric supercapacitor. Carbon 125:595–604CrossRefGoogle Scholar
  13. 13.
    Ochai-Ejeh FO, Madito MJ, Momodu DY, Khaleed AA, Olaniyan O, Manyala N (2017) High performance hybrid supercapacitor device based on cobalt manganese layered double hydroxide and activated carbon derived from cork (Quercus suber). Electrochim Acta 252:41–54CrossRefGoogle Scholar
  14. 14.
    Xu L, Jia M, Li Y, Jin X, Zhang F (2017) High-performance MnO2-deposited graphene/activated carbon film electrodes for flexible solid-state supercapacitor. Sci Rep 7:12857–12865CrossRefGoogle Scholar
  15. 15.
    Weng Y-T, Pan H-A, Lee R-C, Huang T-Y, Chu Y, Lee J-F, Sheu H-S, Wu N-L (2015) Spatially confined MnO2 nanostructure enabling consecutive reversible charge transfer from Mn(IV) to Mn(II) in a mixed pseudocapacitor-battery electrode. Adv Energy Mater 5:1500772–1500779CrossRefGoogle Scholar
  16. 16.
    Yu S, Yang N, Zhuang H, Meyer J, Mandal S, Williams OA, Lilge I, Schönherr H, Jiang X (2015) Electrochemical supercapacitors from diamond. J Phys Chem C 119:18918–18926CrossRefGoogle Scholar
  17. 17.
    Long W, Fang B, Ignaszak A, Wu Z, Wang Y-J, Wilkinson D (2017) Biomass-derived nanostructured carbons and their composites as anode materials for lithium ion batteries. Chem Soc Rev 46:7176–7190CrossRefGoogle Scholar
  18. 18.
    Chung DY, Son YJ, Yoo JM, Kang JS, Ahn C-Y, Park S, Sung Y-E (2017) Coffee waste-derived hierarchical porous carbon as a highly active and durable electrocatalyst for electrochemical energy applications. ACS Appl Mater Interfaces 9:41303–41313CrossRefGoogle Scholar
  19. 19.
    Acevedo B, Barriocanal C (2015) Texture and surface chemistry of activated carbons obtained from tyre wastes. Fuel Process Technol 134:275–283CrossRefGoogle Scholar
  20. 20.
    Acevedo B, Barriocanal C, Lupul I, Gryglewicz G (2015) Properties and performance of mesoporous activated carbons from scrap tyres, bituminous wastes and coal. Fuel 151:83–90CrossRefGoogle Scholar
  21. 21.
    Boota M, Paranthaman MP, Naskar AK, Li Y, Akato K, Gogotsi Y (2015) Waste tire derived carbon–polymer composite paper as pseudocapacitive electrode with long cycle life. Chemsuschem 8:3576–3581CrossRefGoogle Scholar
  22. 22.
    Zhi M, Yang F, Meng F, Li M, Manivannan A, Wu N (2014) Effects of pore structure on performance of an activated-carbon supercapacitor electrode recycled from scrap waste tires. ACS Sustain Chem Eng 2:1592–1598CrossRefGoogle Scholar
  23. 23.
    Liang Y-R, Cao W-L, Zhang X-B, Tan Y-J, He S-J, Zhang L-Q (2009) Preparation and properties of nanocomposites based on different polarities of nitrile-butadiene rubber with clay. J Appl Polym Sci 112:3087–3094CrossRefGoogle Scholar
  24. 24.
    Enterría M, Figueiredo JL (2016) Nanostructured mesoporous carbons: tuning texture and surface chemistry. Carbon 108:79–102CrossRefGoogle Scholar

Copyright information

© Korean Carbon Society 2019

Authors and Affiliations

  • Peng Li
    • 1
  • Xiaoxiao Ma
    • 1
    • 2
  • Yurong Liang
    • 1
    Email author
  • Junhua Tan
    • 1
  • Liyong Wang
    • 3
  1. 1.Department of Materials EngineeringTaiyuan Institute of TechnologyTaiyuanChina
  2. 2.School of Materials Science and EngineeringNorth University of ChinaTaiyuanChina
  3. 3.Department of PhysicsHebei Normal University for NationalitiesChengdeChina

Personalised recommendations