Advertisement

SN Applied Sciences

, 1:407 | Cite as

Correction to: A line measurement method for geometric error measurement of the vertical machining center

  • Huan Lao Liu
  • Muzammil RasheedEmail author
  • Hafiz Hammad Younis
Correction
  • 75 Downloads
Part of the following topical collections:
  1. 3. Engineering (general)

1 Correction to: SN Applied Sciences (2019) 1:324  https://doi.org/10.1007/s42452-019-0341-7

The article A line measurement method for geometric error measurement of the vertical machining center, written by Huan Lao Liu, Muzammil Rasheed and Hafiz Hammad Younis, was originally published electronically on the publisher’s Internet portal (currently SpringerLink) on 9 March 2019 with open access. With the authors’ decision to step back from Open Choice, the copyright of the article changed on 5 April 2019 to © Springer Nature Switzerland AG 2019 and the article is forthwith distributed under the terms of copyright. The original article has been corrected.

Notes

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.School of Mechanical and Power EngineeringGuangdong Ocean UniversityZhanjiangChina

Personalised recommendations