Analysis of Characteristics of Swirling Spray of the Ammonium Dinitramide (ADN)-Based Green Monopropellant
- 4 Downloads
Ammonium dinitramide (ADN) based green propellant is a promising alternative propellant for future space propulsion. Atomization of thruster plays an important role in the entire operation process. This paper describes the effect of swirl injection regarding tangential hole geometric parameter on the atomization characteristics of ADN-based green monopropellant. The experimental apparatus was prepared using a high-speed camera equipped with a macro lens and a Malvern laser particle size analyzer, and an injection device was designed. Characteristics features including particle-size distribution, spray cone, and breakup length of tangential hole number were recorded, and the effect of key parameters on spray processes was evaluated. The results show that the designed swirl injector completely achieved the atomization characteristics. With the increase in tangential hole number, the flow resistance increased, thus significantly affecting the atomization performance. The corresponding average particle size decreased. Moreover, a very large or small tangential hole number clearly affected the breakup length, spray cone angle, and average particle size. The optimum tangential hole diameter was 0.9 mm. The results are beneficial for the improvement of design structure of swirl nozzle based on ADN-based green monopropellant.
KeywordsSpray characteristics Swirling spray Ammonium dinitramide Green monopropellant
This work is supported by the Fundamental Research Funds for the Central Universities (2017JBZ102) and Beijing Natural Science Foundation (3184064).
- 9.Lange M, Lein A, Gotzig U, et al (2013). Introduction of a high-performance ADN based monopropellant thruster on the Myriade propulsion subsystem. In: Recent advances in space technologies (RAST), 2013 6th international conference on. IEEE, 2013, pp 549–553Google Scholar
- 10.Persson M, Anflo K, Dinardi A, Bahu J (2012) A family of thrusters for ADN-based monopropellant LMP-103S. In: 48th AIAA/ASME/SAE/ASEE joint propulsion conference & exhibit, Atlanta, Georgia, 30 July–1 August 2012Google Scholar
- 14.Farhat K, Cong W, Batonneau Y et al (2009) Improvement of catalytic decomposition of ammonium nitrate with new bimetallic catalysts. In: AIAA paper, p 4963Google Scholar
- 20.Radke CD, Meyer TR, Heindel T (2014) Effect of injector exit geometry on atomization of a liquid-liquid double swirl coaxial injector using non-invasive laser, optical, and X-ray techniques. In: 50th AIAA/ASME/SAE/ASEE joint propulsion conference, p 3787Google Scholar
- 22.Aleiferis PG, Behringer MK, OudeNijeweme D, Freeland P (2016) Pressure-swirl atomization of gasoline–butanol, gasoline–ethanol, iso-octane–butanol and iso-octane–ethanol blends. J Cell Physiol 226(8):2081–2090Google Scholar
- 23.Rashad M, Huang Y (2015). Analysis and comparison of correlations established for prediction of SMD for pressure swirl atomizers. In: Applied sciences and technology (IBCAST), 2015 12th international Bhurban conference on. IEEE, pp 460-466Google Scholar
- 24.Fajgenbaum R, dos Santos RG (2015) Influence of fuel temperature on atomization parameters in a pressure-swirl atomizer from a port fuel injector by Shadowgraphy technique. J Braz Soc Mech Sci Eng 2015:1–16Google Scholar