Advertisement

Journal of Iron and Steel Research International

, Volume 25, Issue 9, pp 901–909 | Cite as

A rapid calculation method for predicting roll deformation of six-high rolling mill

  • Li Xie
  • An-rui He
  • Chao Liu
Original Paper
  • 12 Downloads

Abstract

The method to predict roll deformation precisely and efficiently is vital for the strip shape control of a six-high rolling mill. Traditional calculation methods of roll deformation, such as the finite element method and the influence function method, have been widely used due to their accuracies. However, the required calculation time is too long to be applied to the real-time control. Therefore, a rapid calculation method for predicting roll deformation of a six-high rolling mill was proposed, which employed the finite difference method to calculate the roll deflection and used a polynomial to describe the nonlinear relationship between roll flattening and roll contact pressure. Furthermore, a new correction strategy was proposed in the iteration, where the roll center flattening and the roll flattening deviation were put forward and corrected simultaneously in the iteration process according to the static equilibrium of roll. Finally, by the comparison with traditional methods, the proposed method was proved to be more efficient and it was suitable for the online calculation of the strip shape control.

Keywords

Six-high rolling mill Roll deformation Influence function method Rapid calculation method Online model 

Notes

Acknowledgements

This work was financially supported by the National Natural Science Foundation of China (51674028), and Fundamental Research Funds for the Central Universities (FRF-IC-16-001).

References

  1. [1]
    X.T. Li, Z.H. Wu, F.S. Du, J. Iron Steel Res. 20 (2008) No. 10, 29–31.Google Scholar
  2. [2]
    X.H. Liu, X. Shi, S.Q. Li, J.Y. Xu, G.D. Wang, J. Iron Steel Res. Int. 14 (2007) No. 5, 22–26.CrossRefGoogle Scholar
  3. [3]
    X.C. Wang, Q. Yang, Y.Z. Sun, J. Univ. Sci. Technol. Beijing 36 (2014) 824–829.Google Scholar
  4. [4]
    J.N. Sun, T. Xue, F.S. Du, Iron and Steel 47 (2012) No. 2, 49–52.Google Scholar
  5. [5]
    F.S. Du, T. Xue, J.N. Sun, J. Yanshan Univ. 35 (2011) 396–401.Google Scholar
  6. [6]
    Z.W. Yuan, H. Xiao, H.B. Xie, Metall. Mater. Trans. A 45 (2014) 1019–1026.CrossRefGoogle Scholar
  7. [7]
    Y.L. Ma, M.N. Gong, S.Q. Xing, Z.F. Li, Iron and Steel 50 (2015) No. 2, 48–53.Google Scholar
  8. [8]
    J.H. Cho, S.M. Hwang, J. Manuf. Sci. Eng. 136 (2014) 011004.CrossRefGoogle Scholar
  9. [9]
    H.L. Yu, X.H. Liu, C. Wang, H.D. Park, J. Iron Steel Res. Int. 15 (2008) No. 1, 30–33.CrossRefGoogle Scholar
  10. [10]
    K.N. Shohet, N.A. Townsend, J. Iron Steel Inst. 209 (1971) 769–775.Google Scholar
  11. [11]
    W.J. Edwards, P.D. Spooner, G.F. Bryand, Automation of tandem mills, The Iron and Steel Institute, London, 1973.Google Scholar
  12. [12]
    G.D. Wang, The shape control and theory, Metallurgical Industry Press, Beijing, 1986.Google Scholar
  13. [13]
    Z.Y. Jiang, D. Wei, A.K. Tieu, J. Mater. Process. Technol. 209 (2009) 4584–4589.CrossRefGoogle Scholar
  14. [14]
    Z.Y. Jiang, H.T. Zhu, A.K. Tieu, Int. J. Mech. Sci. 48 (2006) 697–706.CrossRefGoogle Scholar
  15. [15]
    X.G. Liang, Iron and Steel 49 (2014) 40–43.Google Scholar
  16. [16]
    J.L. Bai, J.S. Wang, G.D. Wang, X.H. Liu, J. Northeast Univ. Nat. Sci. 26 (2005) 133–136.Google Scholar
  17. [17]
    Y.L. Liu, W.H. Lee, ISIJ Int. 45 (2005) 1173–1178.CrossRefGoogle Scholar
  18. [18]
    H. Zhou, J.L. Bai, Appl. Mech. Mater. 633–634 (2014) 791–794.CrossRefGoogle Scholar
  19. [19]
    C.Y. He, Z.J. Jiao, X.J. Wang, Adv. Mater. Res. 700 (2013) 98–102.CrossRefGoogle Scholar
  20. [20]
    J. Qin, Q. Miao, Eng. Mech. 30 (2013) No. 5, 271–276.Google Scholar
  21. [21]
    Q.D. Zhang, C. Dai, J. Wen, X.F. Zhang, J. Qin, Steel Rolling 30 (2013) No. 3, 1–6.Google Scholar
  22. [22]
    A.S. Malik, R.V. Grandhi, J. Mater. Process. Technol. 206 (2008) 263–274.CrossRefGoogle Scholar
  23. [23]
    F.F. Kong, A.R. He, J. Shao, J. Mech. Eng. 48 (2012) No. 2, 121–126.CrossRefGoogle Scholar
  24. [24]
    J. Shao, L. Bo, A.R. He, W.Q. Sun, Z.B. Liu, J. Zhou, Open Automation & Control Systems Journal 7 (2015) 93–99.Google Scholar
  25. [25]
    D.C. Wang, Y.L. Wu, H.M. Liu, Iron and Steel 50 (2015) No. 11, 69–74.Google Scholar
  26. [26]
    S.P. Timoshenko, J.N. Goodier, Theory of elasticity, 3rd ed., McGraw-Hill, New York, 1970.zbMATHGoogle Scholar

Copyright information

© China Iron and Steel Research Institute Group 2018

Authors and Affiliations

  1. 1.National Engineering Research Center for Advanced Rolling TechnologyUniversity of Science and Technology BeijingBeijingChina

Personalised recommendations