Advertisement

Journal of Bionic Engineering

, Volume 16, Issue 5, pp 828–841 | Cite as

Multiscale Simulation of a Novel Leaf-vein-inspired Gradient Porous Wick Structure

  • Yuanqiang Luo
  • Wangyu LiuEmail author
  • Jingren Gou
Article
  • 10 Downloads

Abstract

With the rapid development of photoelectric products, their miniaturization and high integration have intensified the problem of heat dissipation. Vapor chamber is a special type of heat pipe that is a particularly effective heat spreader for electronics. In this paper, a novel Leaf-vein-inspired Gradient Porous (LGP) wick structure is designed macroscopically and the LGP design is verified using a general model. After that, the gradient porous design Model 1G is selected for the subsequent mesoscopic modeling. Then a connected 2D random LGP wick model presenting porosity gradient is generated by the expanded quartet structure generation set method. Using the mesoscopic Lattice Boltzmann Method (LBM), the flow and heat transfer in the LGP wick model is analyzed. For verification, FLUENT based on the macroscopic finite volume method is used as a benchmark. Finally, the microscopic flow behaviors in the 2D random LGP wick model are analyzed using the LBM developed. Observing the entire flowing process from the inlet to outlet, it is possible to explain the mesoscopic and macroscopic phenomena well based on the microscopic flow behaviors.

Keywords

vapor chamber leaf-vein-inspired gradient porous wick structure lattice Boltzmann method multiscale simulation bionic cooling 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgment

The authors gratefully acknowledge the financial support from the National Natural Science Foundation of China (Nos. 51375169 and 11572128).

References

  1. [1]
    Chan C W, Siqueiros E, Ling-Chin J, Royapoor M, Roskilly A P. Heat utilisation technologies: A critical review of heat pipes. Renewable and Sustainable Energy Reviews, 2015, 50, 615–627.CrossRefGoogle Scholar
  2. [2]
    Shabgard H, Allen M J, Sharifi N, Benn S P, Faghri A, Bergman T L. Heat pipe heat exchangers and heat sinks: Opportunities, challenges, applications, analysis, and state of the art. International Journal of Heat and Mass Transfer, 2015, 89, 138–158.CrossRefGoogle Scholar
  3. [3]
    Chen X P, Ye H Y, Fan X J, Ren T L, Zhang G Q. A review of small heat pipes for electronics. Applied Thermal Engineering, 2016, 96, 1–17.CrossRefGoogle Scholar
  4. [4]
    Tang H, Tang Y, Wan Z P, Li J, Yuan W, Lu L S, Li Y, Tang K R. Review of applications and developments of ultra-thin micro heat pipes for electronic cooling. Applied Energy, 2018, 223, 383–400.CrossRefGoogle Scholar
  5. [5]
    Wong S C, Hsieh K C, Wu J D, Han W L. A novel vapor chamber and its performance. International Journal of Heat and Mass Transfer, 2010, 53, 2377–2384.CrossRefGoogle Scholar
  6. [6]
    Peng Y, Liu W Y, Wang N L, Tian Y F, Chen X L. A novel wick structure of vapor chamber based on the fractal architecture of leaf vein. International Journal of Heat and Mass Transfer, 2013, 63, 120–133.CrossRefGoogle Scholar
  7. [7]
    Ji X B, Xu J L, Abanda A M, Xue Q. A vapor chamber using extended condenser concept for ultra-high heat flux and large heater area. International Journal of Heat and Mass Transfer, 2012, 55, 4908–4913.CrossRefGoogle Scholar
  8. [8]
    Naphon P, Wongwises S, Wiriyasart S. Application of two-phase vapor chamber technique for hard disk drive cooling of PCs. International Communications in Heat and Mass Transfer, 2013, 40, 32–35.CrossRefGoogle Scholar
  9. [9]
    Wang J C, Wang R T, Chang T L, Hwang D S. Development of 30 Watt high-power LEDs vapor chamber-based plate. International Journal of Heat and Mass Transfer, 2010, 53, 3990–4001.CrossRefGoogle Scholar
  10. [10]
    Li H, Liu Z C, Chen B B, Liu W, Li C, Yang J G. Development of biporous wicks for flat-plate loop heat pipe. Experimental Thermal and Fluid Science, 2012, 37, 91–97.CrossRefGoogle Scholar
  11. [11]
    Miao X G, Sun D. Graded/gradient porous biomaterials. Materials, 2009, 3, 26–47.CrossRefGoogle Scholar
  12. [12]
    Wang B C, Hong Y F, Hou X T, Xu Z B, Wang P F, Fang X D, Ruan X D. Numerical configuration design and investigation of heat transfer enhancement in pipes filled with gradient porous materials. Energy Conversion and Management, 2015, 105, 206–215.CrossRefGoogle Scholar
  13. [13]
    Ma P Y, Wang B G, Chen S L, Zhang X W, Tao C F, Xing X J. Numerical investigation of heat transfer enhancement inside the pipes filled with radial pore-size gradient porous materials. Journal of Thermal Science and Engineering Applications, 2018, 10, 054502.CrossRefGoogle Scholar
  14. [14]
    Dong T, Chen Y S, Yang Z C, Bi Q C, Wu H L, Zheng G P. Flow and heat transfer in comby fractal microchannel network. Journal of Chemical Industry and Engineering, 2005, 56, 1618–1625. (in Chinese)Google Scholar
  15. [15]
    Zhao Y, Chen T, Zhang X, Zauscher S, Chen C H. Development of an adaptive vapor chamber with thermoresponsive polymer coating. Proceedings of Micro/Nanoscale Heat and Mass Transfer 2009, Shanghai, China, 2009, 395–398.Google Scholar
  16. [16]
    Zhao Y, Boreyko J B, Chiang M H, Baker C H, Chen C H. Beetle inspired electrospray vapor chamber. Proceedings of Micro/Nanoscale Heat and Mass Transfer 2009, Shanghai, China, 2009, 439–441.Google Scholar
  17. [17]
    Peng Y, Liu W Y, Chen W, Wang N L. A conceptual structure for heat transfer imitating the transporting principle of plant leaf. International Journal of Heat and Mass Transfer, 2014, 71, 79–90.CrossRefGoogle Scholar
  18. [18]
    Peng Y, Liu W Y, Liu B, Liu J Q, Huang K D, Wang L, Chen W. The performance of the novel vapor chamber based on the leaf vein system. International Journal of Heat and Mass Transfer, 2015, 86, 656–666.CrossRefGoogle Scholar
  19. [19]
    Liu W Y, Luo Y Q, Chen W, Peng Y. Investigation on thermal resistance of a novel evaporator wick structure. Applied Thermal Engineering, 2015, 91, 731–738.CrossRefGoogle Scholar
  20. [20]
    Liu W Y, Peng Y, Luo T, Luo Y Q, Huang K D. The performance of the vapor chamber based on the plant leaf. International Journal of Heat and Mass Transfer, 2016, 98, 746–757.CrossRefGoogle Scholar
  21. [21]
    Liu W Y, Wang L, Luo Y Q. Experimental investigation into leaf-vein-like fractal structure applied to evaporation of vapor chamber. Journal of South China University of Technology (Natural Science Edition), 2017, 45, 18–122, 128. (in Chinese)Google Scholar
  22. [22]
    Liu W Y, Luo Y Q, Wang L, Luo T, Peng Y, Wu L. Water transport in leaf vein systems and the flow velocity measurement with a new method. Journal of Plant Physiology, 2016, 204, 74–84.CrossRefGoogle Scholar
  23. [23]
    Luo Y Q, Liu W Y, Wang L, Xie W G. Heat and mass transfer characteristics of leaf-vein-inspired microchannels with wall thickening patterns. International Journal of Heat and Mass Transfer, 2016, 101, 1273–1282.CrossRefGoogle Scholar
  24. [24]
    Zwieniecki M A, Melcher P, Boyce C K, Sack L, Holbrook N. Hydraulic architecture of leaf venation in Laurus nobilis L. Plant, Cell & Environment, 2002, 25, 1445–1450.CrossRefGoogle Scholar
  25. [25]
    Salleo S, Raimondo F, Trifilo P, Nardini A. Axial-to-radial water permeability of leaf major veins: A possible determinant of the impact of vein embolism on leaf hydraulics? Plant, Cell & Environment, 2003, 26, 1749–1758.CrossRefGoogle Scholar
  26. [26]
    Cochard H, Nardini A, Coll L. Hydraulic architecture of leaf blades: Where is the main resistance? Plant, Cell & Environment, 2004, 27, 1257–1267.Google Scholar
  27. [27]
    Yeomans J M. Mesoscale simulations: Lattice Boltzmann and particle algorithms. Physica A: Statistical Mechanics and its Applications, 2006, 369, 159–184.CrossRefGoogle Scholar
  28. [28]
    Perumal D A, Dass A K. A review on the development of lattice Boltzmann computation of macro fluid flows and heat transfer. Alexandria Engineering Journal, 2015, 54, 955–971.CrossRefGoogle Scholar
  29. [29]
    Li Q, Zhao K, Xuan Y M. Simulation of flow and heat transfer with evaporation in a porous wick of a CPL evaporator on pore scale by lattice Boltzmann method. International Journal of Heat and Mass Transfer, 2011, 54, 2890–2901.CrossRefGoogle Scholar
  30. [30]
    Xuan Y M, Zhao K, Li Q. Investigation on heat and mass transfer in a evaporator of a capillary-pumped loop with the lattice Boltzmann method: Pore scale simulation. Transport in Porous Media, 2011, 89, 337–355.MathSciNetCrossRefGoogle Scholar
  31. [31]
    Zhang C Y, Hong F J, Cheng P. Simulation of liquid thin film evaporation and boiling on a heated hydrophilic microstructured surface by Lattice Boltzmann method. International Journal of Heat and Mass Transfer, 2015, 86, 629–638.CrossRefGoogle Scholar
  32. [32]
    Luan H, Xu H, Chen L, Tao W. Coupling between FVM and LBM for heat transfer and fluid flow problems. Chinese Science Bulletin, 2010, 55, 3128–3140. (in Chinese)CrossRefGoogle Scholar
  33. [33]
    Chen L, Feng Y L, Song C X, Chen L, He Y L, Tao W Q. Multi-scale modeling of proton exchange membrane fuel cell by coupling finite volume method and lattice Boltzmann method. International Journal of Heat and Mass Transfer, 2013, 63, 268–283.CrossRefGoogle Scholar
  34. [34]
    Chen L, He Y L, Kang Q, Tao W Q. Coupled numerical approach combining finite volume and lattice Boltzmann methods for multi-scale multi-physicochemical processes. Journal of Computational Physics, 2013, 255, 83–105.MathSciNetCrossRefGoogle Scholar
  35. [35]
    Tong Z X, He Y L. A unified coupling scheme between lattice Boltzmann method and finite volume method for unsteady fluid flow and heat transfer. International Journal of Heat and Mass Transfer, 2015, 80, 812–824.CrossRefGoogle Scholar
  36. [36]
    Mu Y T, Chen L, He Y L, Tao W Q. Coupling finite volume and lattice Boltzmann methods for pore scale investigation on volatile organic compounds emission process. Building and Environment, 2015, 92, 236–245.CrossRefGoogle Scholar
  37. [37]
    Chiappini D, Festuccia A, Bella G. Coupled lattice Boltzmann finite volume method for conjugate heat transfer in porous media. Numerical Heat Transfer, Part A: Applications, 2018, 73, 291–306.CrossRefGoogle Scholar
  38. [38]
    Imamura T, Suzuki K, Nakamura T, Yoshida M. Acceleration of steady-state lattice Boltzmann simulations on non-uniform mesh using local time step method. Journal of Computational Physics, 2005, 202, 645–663.CrossRefGoogle Scholar
  39. [39]
    Li W Z, Zhou X, Dong B, Sun T. A thermal LBM model for studying complex flow and heat transfer problems in body-fitted coordinates. International Journal of Thermal Sciences, 2015, 98, 266–276.CrossRefGoogle Scholar
  40. [40]
    Zheng J T, Chen Z Q, Xie C Y, Wang Z Y, Lei Z D, Ju Y, Wang M. Characterization of spontaneous imbibition dynamics in irregular channels by mesoscopic modeling. Computers & Fluids, 2018, 168, 21–31.MathSciNetCrossRefGoogle Scholar
  41. [41]
    Sun Y J, Zhang X B. A hybrid strategy of lattice Boltzmann method and finite volume method for combined conduction and radiation in irregular geometry. International Journal of Heat and Mass Transfer, 2018, 121, 1039–1054.CrossRefGoogle Scholar
  42. [42]
    Alazmi B, Vafai K. Constant wall heat flux boundary conditions in porous media under local thermal non-equilibrium conditions. International Journal of Heat and Mass Transfer, 2002, 45, 3071–3087.CrossRefGoogle Scholar
  43. [43]
    Wang M, Chen S. Electroosmosis in homogeneously charged micro- and nanoscale random porous media. Journal of Colloid and Interface Science, 2007, 314, 264–273.CrossRefGoogle Scholar
  44. [44]
    Mohamad A A. Lattice Boltzmann Method: Fundamentals and Engineering Applications with Computer Codes. Springer, London, UK, 2011, 91–100.CrossRefGoogle Scholar
  45. [45]
    Zou Q S, He X Y. On pressure and velocity boundary conditions for the lattice Boltzmann BGK model. Physics of Fluids, 1997, 9, 1591–1598.MathSciNetCrossRefGoogle Scholar
  46. [46]
    Guiet J, Reggio M, Teyssedou A. Implementation and application of the lattice Boltzmann method using MATLAB. Engineering Applications of Computational Fluid Mechanics, 2011, 5, 117–126.CrossRefGoogle Scholar

Copyright information

© Jilin University 2019

Authors and Affiliations

  1. 1.School of Mechanical and Automotive EngineeringSouth China University of TechnologyGuangzhouChina

Personalised recommendations