“Fluidic diode” for passive unidirectional liquid transport bioinspired by the spermathecae of fleas
- 18 Downloads
We present a device for passive unidirectional liquid transport. The capillary channels used are bioinspired by the shape of the spermathecae (receptaculum seminis) of rabbit fleas (Spilopsyllus cuniculi) and rat fleas (Xenopsylla cheopis). The spermatheca is an organ of female fleas that stores sperm until suitable conditions to lay eggs are found. We translated and multiplied the natural form and function of a spermatheca to create a continuous capillary system from which we designed our microfluidic device based directly on the model from nature. Applying the Young-Laplace equation, we derived a theoretical description of local liquid transport, which enables model-guided design. We arranged the bioinspired capillaries in parallel and engraved them in poly(methyl methacrylate) (PMMA) plates by CO2 laser ablation. The fabricated structures transport soapy water passively (i.e., without external energy input) in the forward direction at velocities of about 1 mm·s−1 while halting the liquid fronts completely in the backward direction. The bioinspired capillary channels are capable of unidirectional liquid transport against gravity. Distance and velocity measurements prove the feasibility of the concept. Unidirectional passive liquid transport might be advantageous in technical surfaces for liquid management, for instance, in biomedical microfluidics, lab-on-chip, lubrication, electronics cooling and in micro-analysis devices.
Keywordsliquid diode wetting passive unidirectional liquid transport capillary bioinspired
We thank the Institute of Polymer Science at Johannes Kepler University Linz for providing the setup for surface tension and contact angle measurement, and the Biologiezentrum Linz for lending us the sample of the flea. We are grateful to Anna Stadler for her help with Fig. 1. Furthermore, we thank Thomas Fritz, Kurt Thaller B.Sc. and Dr. Andreas Buchsbaum from the company RECENDT GmbH for technical assistance. We acknowledge financial support from Kimberly-Clark Corporation and from the European Research Council within the Advanced Investigators Grant SoftMap (Soft Matter Physics Team). Financial support from the European Commission is acknowledged within the “LiNaBioFluid” project within the scope of H2020-FETOPEN-2014-2015-RIA. This research was further supported by the Austrian Research Promotion Agency (FFG) under contract number FFGP13830002/MicroNeedle.
Supplementary material, approximately 9.28 MB.
Supplementary material, approximately 5.64 MB.
Supplementary material, approximately 7.97 MB.
- Traub R, Rothschild M L, Haddow J F. The Rothschild Collection of Fleas. The Ceratophyllidae: Key to the Genera and Host Relationships, Cambridge, University Press, UK, 1983.Google Scholar
- Comanns P, Winands K, Pothen M, Bott R A, Wagner H, Baumgartner W. The Texas horned lizard as model for robust capillary structures for passive directional transport of cooling lubricants. Proceedings of SPIE - The International Society for Optical Engineering, 2016, 9797, 979711.Google Scholar
- Sochol R D, Deeble C J, Shen V, Nakamura M, Hightower B J, Brubaker T A, Lee K Y, Gao S, Kim M, Wolf K T, Iwai K, Glick C C, Lee L P, Lin L. Single-layer microfluidic “disc” diodes via optofluidic lithography for ultra-low Reynolds number applications. The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers and Eurosensors XXVII), 2013, 2201–2204.Google Scholar
- Herder V, Wohlsein P, Peters M, Hansmann F, Baumgartner W. Romeis–Mikroskopische Technik, Springer Berlin Heidelberg, Berlin, Heidelberg, Germany, 2015. (in German)Google Scholar
- Berthier J, Silberzan P. Microfluidics in Biotechnology, 2nd ed., Artech House, Boston, USA, 2010.Google Scholar
- Lenormand R, Zarcone C. Role of roughness and edges during imbibition in square capillaries. SPE Annual Technical Conference and Exhibition, 1984, SPE-13264.Google Scholar
- Heitz J, Plamadeala C, Wiesbauer M, Freudenthaler P, Wollhofen R, Jacak J, Klar T A, Magnus B, Köstner D, Weth A, Baumgartner W, Marksteiner R. Bone-forming cells with pronounced spread into the third dimension in polymer scaffolds fabricated by two-photon polymerization. Journal of Biomedical Materials Research Part A, 2016, 105A, 891–899.Google Scholar
- Michel B, Bernard A, Bietsch A, Delamarche E, Geissler M, Juncker D, Kind H, Renault J P, Rothuizen H, Schmid H, Schmidt-Winkel P, Stutz R, Wolf H. Printing meets lithography: Soft approaches to high-resolution patterning. IBM Journal of Research & Development, 2002, 56, 527–542.Google Scholar
- Kim P, Kwon K W, Park M C, Lee S H, Kim S M. Soft lithography for microfluidics: A Review. Biochip Journal, 2008, 2, 1–11.Google Scholar
- Taniguchi J, Yoshikawa H, Tazaki G, Zento T. High-density pattern transfer via roll-to-roll ultraviolet nanoimprint lithography using replica mold. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 2012, 30, 06FB07.Google Scholar
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, duplication, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.
This article is published with open access at Springerlink.com, corrected publication 03/2018
The original article has been corrected.