Advertisement

Diagnosis of gear tooth fault in a bevel gearbox using discrete wavelet transform and autoregressive modeling

  • Snehsheel Sharma
  • S. K. Tiwari
  • Sukhjeet SinghEmail author
Original Research
  • 52 Downloads

Abstract

Vibration signals from any dynamic system are measured with respect to time. Different options are available to analyze these measured signals due to the advancement in computing and signal processing techniques. In the present work, a methodology comprising of discrete wavelet transform and autoregressive model has been proposed for detection of single tooth fault in single stage reduction bevel gearbox. An autoregressive model is constructed using detailed coefficients of discrete wavelet transform to highlight the presence of the fault in gearbox. The results show that variance of autoregressive coefficients obtained for faulty signal is more than the variance of autoregressive coefficients extracted from healthy signal. Based on the results, it is concluded that the proposed methodology can be used as health condition indicator of the gearbox system.

Keywords

Vibration analysis Fault diagnosis Health condition indicator Autoregressive model Discrete wavelet transform 

References

  1. Belsak A, Flasker J (2007) Detecting cracks in the tooth root of gears. Eng Fail Anal 14(8):1466–1475CrossRefGoogle Scholar
  2. Caesarendra W, Tjahjowidodo T (2017) A review of feature extraction methods in vibration-based condition monitoring and its application for degradation trend estimation of low-speed slew bearing. Machines 5(4):1–28CrossRefGoogle Scholar
  3. Choy F, Huang S, Zakrajsek J, Handschuh R, Townsend D (1996) Vibration signature analysis of a faulted gear transmission system. J Propul Power 12(2):289–295CrossRefGoogle Scholar
  4. Daubechies I, Grossmann A, Meyer Y (1986) Painless nonorthogonal expansions. J Math Phys 27(5):1271–1283MathSciNetCrossRefzbMATHGoogle Scholar
  5. Dron J, Rasolofondraibe L, Couet C, Pavan A (1998) Fault detection and monitoring of a ball bearing benchtest and a production machine via autoregressive spectrum analysis. J Sound Vib 218(3):501–525CrossRefGoogle Scholar
  6. Endo H, Randall R (2007) Enhancement of autoregressive model based gear tooth fault detection technique by the use of minimum entropy deconvolution filter. Mech Syst Signal Process 21(2):906–919CrossRefGoogle Scholar
  7. Ha JM, Youn BD, Oh H, Han B, Jung Y, Park J (2016) Autocorrelation-based time synchronous averaging for condition monitoring of planetary gearboxes in wind turbines. Mech Syst Signal Process 70:161–175CrossRefGoogle Scholar
  8. Igba J, Alemzadeh K, Durugbo C, Eiriksson ET (2016) Analysing rms and peak values of vibration signals for condition monitoring of wind turbine gearboxes. Renew Energy 91:90–106CrossRefGoogle Scholar
  9. Kankar P, Sharma SC, Harsha S (2011) Fault diagnosis of high speed rolling element bearings due to localized defects using response surface method. J Dyn Syst Meas Control 133(3):1–14CrossRefGoogle Scholar
  10. Konar P, Chattopadhyay P (2015) Multi-class fault diagnosis of induction motor using hilbert and wavelet transform. Appl Soft Comput 30:341–352CrossRefGoogle Scholar
  11. Lei Y, Lin J, Zuo MJ, He Z (2014) Condition monitoring and fault diagnosis of planetary gearboxes: a review. Measurement 48:292–305CrossRefGoogle Scholar
  12. Li Z, Yan X, Yuan C, Peng Z, Li L (2011) Virtual prototype and experimental research on gear multi-fault diagnosis using wavelet-autoregressive model and principal component analysis method. Mech Syst Signal Process 25(7):2589–2607CrossRefGoogle Scholar
  13. Loutas T, Sotiriades G, Kostopoulos V (2010) Condition monitoring of gears and advanced signal processing techniques towards more effective diagnostic schemes. Noise Vib Worldw 41(7):10–18CrossRefGoogle Scholar
  14. McCormick A, Nandi A, Jack L (1998) Application of periodic time-varying autoregressive models to the detection of bearing faults. Proc Inst Mech Eng Part C J Mech Eng Sci 212(6):417–428CrossRefGoogle Scholar
  15. Nikhar NK, Patankar SS, Kulkarni JV (2013) Gear tooth fault detection by autoregressive modelling. In: 2013 Fourth International Conference on computing, communications and networking technologies (ICCCNT), IEEE, pp 1–6Google Scholar
  16. Rafiee J, Tse P (2009) Use of autocorrelation of wavelet coefficients for fault diagnosis. Mech Syst Signal Process 23(5):1554–1572CrossRefGoogle Scholar
  17. Saravanan N, Ramachandran K (2010) Incipient gear box fault diagnosis using discrete wavelet transform (dwt) for feature extraction and classification using artificial neural network (ann). Expert Syst Appl 37(6):4168–4181CrossRefGoogle Scholar
  18. Shreve DH (1995) Signal processing for effective vibration analysis. IRD Mechanalysis, pp 1–11Google Scholar
  19. Singh A, Parey A (2017) Gearbox fault diagnosis under non-stationary conditions with independent angular re-sampling technique applied to vibration and sound emission signals. Appl AcoustGoogle Scholar
  20. Singh S, Kumar N (2014) Rotor faults diagnosis using artificial neural networks and support vector machines. Int J Acoust Vib 20(3):153–159MathSciNetGoogle Scholar
  21. Singh S, Kumar N (2017) Detection of bearing faults in mechanical systems using stator current monitoring. IEEE Trans Ind Inf 13(3):1341–1349CrossRefGoogle Scholar
  22. Teolis A, Benedetto JJ (1998) Computational signal processing with wavelets, vol 182. Springer, BerlinCrossRefzbMATHGoogle Scholar
  23. Tom KF (2010) Survey of diagnostic techniques for dynamic components. Tech. rep., Army Research Lab Adelphi Md Sensor and Electron Devices DirectorateGoogle Scholar
  24. Vakharia V, Gupta V, Kankar P (2015) Bearing fault component identification using information gain and machine learning algorithms. In: Structural health monitoring and inspection of advanced materials, aerospace, and civil infrastructure 2015, international society for optics and photonics, vol 9437, pp 1–8Google Scholar
  25. Vakharia V, Gupta V, Kankar P (2016) A comparison of feature ranking techniques for fault diagnosis of ball bearing. Soft Comput 20(4):1601–1619CrossRefGoogle Scholar
  26. Wang W, Wong AK (2002) Autoregressive model-based gear fault diagnosis. J Vib Acoust 124(2):172–179CrossRefGoogle Scholar
  27. Wang W (2003) An evaluation of some emerging techniques for gear fault detection. Struct Health Monit 2(3):225–242CrossRefGoogle Scholar
  28. Wang W, McFadden P (1993) Early detection of gear failure by vibration analysis i. calculation of the time-frequency distribution. Mech Syst Signal Process 7(3):193–203CrossRefGoogle Scholar
  29. Wang W, McFadden P (1995) Application of orthogonal wavelets to early gear damage detection. Mech Syst Signal Process 9(5):497–507CrossRefGoogle Scholar
  30. Wang X, Makis V (2009) Autoregressive model-based gear shaft fault diagnosis using the Kolmogorov–Smirnov test. J Sound Vib 327(3):413–423CrossRefGoogle Scholar
  31. Yan R, Gao RX, Chen X (2014) Wavelets for fault diagnosis of rotary machines: a review with applications. Signal Process 96:1–15CrossRefGoogle Scholar

Copyright information

© Society for Reliability and Safety (SRESA) 2018

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringDr B. R. Ambedkar, National Institute of TechnologyJalandharIndia
  2. 2.Department of Mechanical EngineeringGuru Nanak Dev University Regional Campus SathialaAmritsarIndia

Personalised recommendations