Advertisement

International Journal of Information Technology

, Volume 11, Issue 4, pp 875–878 | Cite as

Dual-band substrate integrated waveguide (SIW) band pass filter for scientific radar applications

  • Aman KumariEmail author
  • Dhirendra Kumar
  • Arun Kumar
Original Research
  • 36 Downloads

Abstract

In this paper, a dual-band substrate integrated waveguide filter is proposed for 45.5–52.5 GHz and 60–62.5 GHz band. Dual-band substrate integrated waveguide filter is a three pole filter and with multiple transmission zeros. The substrate integrated waveguide (SIW) is designed by inserting metallic vias along the side walls of the substrate with specific spacing and varying diameter. A parametric study by varying the vias geometry is presented with vias diameter as 0.10, 0.12 and 0.18 mm. The return loss and insertion loss of the proposed filter are better that 15 and 1.18 dB, respectively at 0.12 mm which is the improved result as compared when the vias diameter is 0.10 mm and 0.18 mm. The fractional bandwidth is 8.9 and 4.09% from 45.5 to 52.5 GHz and 60 to 62.5 GHz, respectively.

Keywords

Substrate integrated waveguide Dual-band Band pass filter Transmission zeros 

References

  1. 1.
    Kumar H, Jadhav R (2012) A review on substrate integrated waveguide and its microstrip interconnect. IOSR J Electron Commun Eng (IOSRJEC) 3(5):36–40CrossRefGoogle Scholar
  2. 2.
    Shigeki F (1994) Waveguide Line (in Japanese). Japan Patent 06-053 711Google Scholar
  3. 3.
    Mizuno K, Wagatsuma Y, Warashina H, Sawaya K, Sato H, Miyanaga S, Yamanaka Y (2007) Millimeter-wave imaging technologies and their applications. In: IEEE International Vacuum Electronics Conference, IVEC ‘07, p 15-17Google Scholar
  4. 4.
    Cassivi Y, Wu K (2003) Low cost microwave oscillator using substrate integrated waveguide cavity. Microw Wirel Compon Guided Wave Lett 13:48–50CrossRefGoogle Scholar
  5. 5.
    Germain S, Deslandes D, Wu K (2003) Development of substrate integrated waveguide power dividers. In: Electrical and Computer Engineering, 2003, IEEE CCECE2003. Canadian Conference on, vol 3, p 1921–1924, 4-7 May 2003Google Scholar
  6. 6.
    Deslandes D, Wu K (2003) Millimeter-wave substrate integrated waveguide filters. In: Electrical and Computer Engineering, 2003, IEEE CCECE 2003. Canadian Conference, vol. 3, p 1917–1920, 4–7 May 2003Google Scholar
  7. 7.
    Wu K, Deslandes D, Cassivi Y (2003) The substrate integrated circuits—a new concept for high-frequency electronics and optoeletronics. In: Presented at Telecommunications in Modern Satellite, Cable and Broadcasting Service, 2003. TELSIKS 2003. 6th International Conference on, vol 1, p P-III–P-X. 1–3 Oct 2003Google Scholar
  8. 8.
    Deslandes D, Wu K (2003) Single-substrate integration techniques for planar circuits and waveguide filters. IEEE Trans Microw Theory Technol 51(2):593–596CrossRefGoogle Scholar
  9. 9.
    Deslandes D, Wu K (2001) Integrated microstrip and rectangular waveguide in planar form. IEEE Microw Wirel Compon Lett 11(2):68–70CrossRefGoogle Scholar
  10. 10.
    Li GH, Cheng XQ, Jian H, Wang HY (2014) Novel high-selectivity dual-band substrate integrated waveguide filter with multi-transmission zeros. Prog Electromagn Res Lett 7:7–12CrossRefGoogle Scholar
  11. 11.
    Huang CL, Pan CL (2002) Dual-band multilayer ceramic microwave bandpassfilter for applications in wireless communication. Microw Opt Technol Lett 32(5):327–329CrossRefGoogle Scholar
  12. 12.
    Tsa LC, Hsue CW (2004) Dual band bandpass filters using equal-length coupled-serial-shunted lines and Z-transform technique. IEEE Trans Microw Theory Tech 52(4):1111–1117CrossRefGoogle Scholar
  13. 13.
    Lee J, Uhm MS, Yom IB (2004) A dual-pass band filter of canonical structure for satellite applications. IEEE Microw Wirel Compon Lett 14(6):271–273CrossRefGoogle Scholar
  14. 14.
    Lenoir P, Bila S, Seyfert F, Baillargeat D et al (2006) Synthesis and design of asymmetrical dual-band bandpass filters based on equivalent network simplification. IEEE Trans Microw Theory Tech 54(7):3090–3097CrossRefGoogle Scholar
  15. 15.
    Velazquez-Ahumada MDC, Martel-Villagr J, Medina F, Mesa F (2010) Application of stub loaded folded stepped impedance resonators to dual band filter design. Prog Electromagn Res 102:107–124CrossRefGoogle Scholar
  16. 16.
    Lee CH, Wang IC, Hsu CIG (2009) Dual-band balanced BPF using quarter wavelength stepped-impedance resonators and folded feed lines. J Electromagn Waves Appl 23(17–18):2441–2449Google Scholar
  17. 17.
    Weng MH, Liu SK, Wu HW, Hung CH (2010) A dual-band bandpass Filter having wide and narrow bands simultaneously using multilayered stepped impedance resonators. Prog Electromagn Res Lett 13:139–147CrossRefGoogle Scholar
  18. 18.
    Huang TH, Chang CS, Chen HJ (2007) Simple method for a K-band SIW Filter with dual- mode quasi-elliptic function response. Microw Opt Technol Lett 49(6):1246–1248CrossRefGoogle Scholar
  19. 19.
    Zhang XC, Xu J, Yu ZY et al (2008) C-band half mode substrate integrated waveguide (HMSIW) filter. Microw Opt Technol Lett 50(2):275–277CrossRefGoogle Scholar
  20. 20.
    Chen J, Wu B, Jiang LW, Liang CH (2011) A compact hexagonal dual-band substrate integrated waveguide filter based on extracted-pole technique. Microw Opt Technol Lett 53(3):562–564CrossRefGoogle Scholar

Copyright information

© Bharati Vidyapeeth's Institute of Computer Applications and Management 2018

Authors and Affiliations

  1. 1.Department of Electronics and Communication EngineeringIFTM UniversityMoradabadIndia
  2. 2.Maharaja Surajmal Institute of TechnologyDelhiIndia
  3. 3.Department of Electronics and Communication EngineeringRKGITGhaziabadIndia

Personalised recommendations