Advertisement

Avoiding sealing failure of flanged connection for tubes made of dissimilar materials subjected to elevated temperature

  • Qi-Ming LiEmail author
  • Chong Zhou
  • Jian Tian
  • Yao Fu
  • Yang Zou
  • Na-Xiu WangEmail author
Article
  • 20 Downloads

Abstract

Carbonic composite materials and ceramics appear to be excellent structural materials for parts subjected to very high temperatures in molten salt reactors (MSRs), in which the reactor core outlet temperature is normally above 700 °C. Because of the high temperature, there are major challenges in the sealing of flanged connections for tubes made of alloys and nonmetallic materials. In this study, an improved method for sealing bolted flange connections for tubes made of dissimilar materials at high temperature is analyzed. The study focuses on the compensation mechanism for the difference in thermal expansion between the bolts and the flanges. An angle is introduced for the sealing surface in the flanged connection to provide effective sealing. The arctangent of the angle is the ratio of the thickness between the theoretical core of the sealing surface and the outside end face of the flange to the distances between the axis of the flanged joint and the theoretical core of the sealing surface of the flange; the sealing surface of the flange, which is made of the same material as the fastening assemblies, faces the fastening assemblies. To ensure effective sealing, the frictional coefficient between the two sealing surfaces should not exceed the tangent of the angle. This result does not agree well with the solution given by previous researchers. Further, in the modified flanged connection, the compression of each bolt in the clamped condition is increased to maintain the compaction force unchanged without increasing the number of bolts on the flanged joint.

Keywords

Sealing Composite flanged connections Thermal expansion Mechanical analysis Molten salt reactors 

References

  1. 1.
    D. F. Williams, Assessment of Candidate Molten Salt Coolants for the NGNP/NHI Heat-Transfer Loop. Oak Ridge National Laboratory Report, ORNL/TM-2006/69 (2006)Google Scholar
  2. 2.
    P. Sabharwall, M. Ebner, M. Sohal et al., Molten Salts for High Temperature Reactors: University of Wisconsin Molten Salt Corrosion and Flow Loop Experiments—Issues Identified and Path Forward. Idaho National Laboratory report INL/EXT-10-18090 (2010)Google Scholar
  3. 3.
    P. Sabharwall, M. Patterson, V. Utgikar et al., Phase change heat transfer device for process heat applications. Nucl. Eng. Des. 240(2010), 2409–2414 (2010).  https://doi.org/10.1016/j.nucengdes.2010.05.054 CrossRefGoogle Scholar
  4. 4.
    C. W. Forsberg, P. F. Peterson, H. H. Zhao et al., An advanced molten salt reactor using high temperature reactor technology, in Proceedings of Icapp04, Paper 4152 (2004)Google Scholar
  5. 5.
    C. W. Forsberg, Molten-salt-reactor technology gaps, in Proceedings of Icapp06, Paper 6295 (2006)Google Scholar
  6. 6.
    P. Yvon, F. Carré, Structural materials challenges for advanced reactor systems. J. Nucl. Mater. 385(2), 217–222 (2009).  https://doi.org/10.1016/j.jnucmat.2008.11.026 CrossRefGoogle Scholar
  7. 7.
    S. Sheykhi, S. Talebi, M. Soroush et al., Thermal-hydraulic and stress analysis of AP1000 reactor containment during LOCA in dry cooling mode. Nucl. Sci. Tech. 28, 73 (2017).  https://doi.org/10.1007/s41365-017-0233-8 CrossRefGoogle Scholar
  8. 8.
    J.F. Mao, D. Tang, S.Y. Bao et al., High temperature strength and multiaxial fatigue life assessment of a tubesheet structure. Eng. Fail. Anal. 68, 10–21 (2016).  https://doi.org/10.1016/j.engfailanal.2016.05.030 CrossRefGoogle Scholar
  9. 9.
    J.F. Mao, J.W. Zhu, S.Y. Bao et al., Study on structural failure of RPV with geometric discontinuity under severe accident. Nucl. Eng. Des. 307, 354–363 (2016).  https://doi.org/10.1016/j.nucengdes.2016.07.027 CrossRefGoogle Scholar
  10. 10.
    J.F. Mao, X.Q. Li, S.Y. Bao et al., Investigation on multilayer failure mechanism of RPV with a high temperature gradient from core meltdown scenario. Nucl. Eng. Des. 310, 39–47 (2016).  https://doi.org/10.1016/j.nucengdes.2016.10.005 CrossRefGoogle Scholar
  11. 11.
    D. T. Ingersoll, Status of Preconceptual Design of the Advanced High-Temperature Reactor (AHTR). ORNL/TM-2004/104 (2004)Google Scholar
  12. 12.
    P. Sabharwall, S.M. Bragg-Sitton, C. Stoots, Challenges in the development of high temperature reactors. Energy Convers. Manag. 74, 574–581 (2013).  https://doi.org/10.1016/j.enconman.2013.02.021 CrossRefGoogle Scholar
  13. 13.
    Q.M. Li, J. Tian, C. Zhou et al., A new method to evaluate the sealing reliability of the flanged connections for Molten Salt Reactors. Nucl. Eng. Des. 287, 90–94 (2015).  https://doi.org/10.1016/j.nucengdes.2015.03.003 CrossRefGoogle Scholar
  14. 14.
    V. Caccese, J.P. Kabche, K.A. Berube, Analysis of a hybrid composite/metal bolted connection subjected to flexural loading. Compos. Struct. 81, 450–462 (2007).  https://doi.org/10.1016/j.compstruct.2006.09.009 CrossRefGoogle Scholar
  15. 15.
    J.P. Kabche, V. Caccese, K.A. Berube et al., Structural response of a hybrid composite-to-metal bolted connection under uniform pressure loading. Compos. Struct. 78, 207–221 (2007).  https://doi.org/10.1016/j.compstruct.2005.09.002 CrossRefGoogle Scholar
  16. 16.
    V. Caccese, K.A. Berube, M. Fernandez et al., Influence of stress relaxation on clamp-up force in hybrid composite-to-metal bolted joints. Compos. Struct. 89, 285–293 (2009).  https://doi.org/10.1016/j.compstruct.2008.07.031 CrossRefGoogle Scholar
  17. 17.
    G. G. Lessmann, Bimetallic coupling joint for tubes of dissimilar materials. U.S. Patent 3632143, 1972Google Scholar
  18. 18.
    K. A. Schülke, Flange connection to connect a metallic and a glass or ceramic structural element. U.S. Patent 4349203, 1982Google Scholar
  19. 19.
    S. Izumi, T. Yokoyama, M. Kimura et al., Loosening-resistance evaluation of double-nut tightening method and spring washer by three-dimensional finite element analysis. Eng. Fail. Anal. 16, 1510–1519 (2009).  https://doi.org/10.1016/j.engfailanal.2008.09.027 CrossRefGoogle Scholar
  20. 20.
    Ministry of industry and information technology of People’s Republic of China, HG/T 20592-2009 Steel pipe flanges (PN designated) (2009)Google Scholar
  21. 21.
    Chinese Mechanical Engineering Society, China Mechanical Design Canon: Fundamentals of Mechanical Design, vol. 2 (Jiangxi Science and Technology Press, Jiangxi, 2002), p. 21Google Scholar
  22. 22.
    J.D. Zhang, Basis of Carbon Material Engineering (Metallurgical Industry Press, Beijing, 1992), p. 16Google Scholar
  23. 23.
    Frictional coefficient table of various materials. http://ishare.iask.sina.com.cn/f/8297455.html. Accessed 6 Feb 2018

Copyright information

© China Science Publishing & Media Ltd. (Science Press), Shanghai Institute of Applied Physics, the Chinese Academy of Sciences, Chinese Nuclear Society and Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Shanghai Institute of Applied PhysicsChinese Academy of SciencesShanghaiChina

Personalised recommendations