Adsorption and inhibitive performance of 3-methylquinoxaline-2(1H)-thione against mild steel corrosion in phosphoric acid solution
- 217 Downloads
Inhibitive performance of 3-methylquinoxaline-2 (1H) -thione denoted (MQ = S) on mild steel corrosion in 1.0 M H3PO4 was investigated using electrochemical measurements. It is revealed that this product acts as an excellent corrosion inhibitor for mild steel in 1.0 M H3PO4 where its inhibition reaches 93% at 5 × 10−4 M and increases with immersion time. Potentiodynamic polarization curves indicated that this compound acts as a mixed-type inhibitor. In addition, the MQ = S has its inhibition at high temperature. It was found that the adsorption of this compound obeyed the Langmuir adsorption isotherm.
KeywordsQuinoxaline derivative Corrosion inhibition Mild steel Phosphoric acid Electrochemical techniques
The authors appreciate the experimental support given by all members of ‘Laboratoire d’Ingénierie des Matériaux et d’Environnement: Modélisation et Application, Faculté des Sciences, Université Ibn Tofail’.
Compliance with ethical standards
Conflict of interest
All of the authors have declared no conflicts of interest.
- Bammou L, Belkhaouda M, Salghi R, Benali O, Zarrouk A, Zarrok H, Hammouti B (2014) Corrosion inhibition of steel in sulfuric acidic solution by the chenopodium ambrosioides extracts. J Assoc Arab Univ Basic Appl Sci 16:83–90Google Scholar
- Benbouya K, Zerga B, Sfaira M, Taleb M, Ebn Touhami M, Hammouti B, Benzeid H, Essassi EM (2012) WL, IE and EIS studies on the corrosion behaviour of mild steel by 7-substituted 3-methylquinoxalin-2 (1H)-ones and thiones in hydrochloric acid medium. Int J Electrochem Sci 7:6313–6330Google Scholar
- Bouckamp A (1993) Users manual equivalent circuit, ver. 4.51Google Scholar
- Brown DJ, Taylor EC, Ellman JA (2004) Heterocyclic compounds: the Quinoxalines: supplement II, vol 61. John Wiley, Hoboken, New Jersey, p 443Google Scholar
- Chitra S, Parameswari K, Vidhya M, Kalishwari M, Selvaraj A (2011) Evaluation of quinoxalines as corrosion inhibitors for mild steel in acid environment. Int J Electrochem Sci 6:4593–4613Google Scholar
- El Ouali I, Hammouti B, Aouniti A, Ramli Y, Azougagh M, Essassi EM, Bouachrine M (2010) Thermodynamic characterisation of steel corrosion in HCl in the presence of 2-phenylthieno (3, 2-b) quinoxaline. J Mater Environ Sci 1:1–8Google Scholar
- Faustin M, Lebrini M, Robert F, Roos C (2011) Corrosion studies of C38 steel by alkaloids extract of a tropical plant type. Int J Electrochem Sci 6:4095–4113Google Scholar
- Ivanov ES (1986) Inhibitors for metal corrosion in acid media, metallurgy, MoscowGoogle Scholar
- Jorcin JB (2007) Thesis, INP, France. http://ethesis.inp-toulouse.fr/archive/00000494/
- Rochdi A, Kassou O, Dkhireche N, Touir R, El Bakri M, Ebn Touhami M, Sfaira M, Mernari B, Hammouti B (2014) Inhibitive properties of 2, 5-bis (n-methylphenyl)-1, 3, 4-oxadiazole and biocide on corrosion, biocorrosion and scaling controls of brass in simulated cooling water. Corros Sci 80:442–452CrossRefGoogle Scholar
- Tian H, Li W, Hou B (2013) Electrochemical and theoretical investigation of triazole derivatives as corrosion inhibitors for copper in 3.5% NaCl solution. Int J Electrochem Sci 8:8513–8529Google Scholar
- Touir R, Ebn Touhami M, Lakhrissi B (2014) Mild steel corrosion inhibition in 200 ppm NaCl by new surfactant. LAP LAMBRT Acadimic Publishing, SaarbruckenGoogle Scholar
- Zarrok H, Zarrouk A, Salghi R, Hammouti B, Chahboun N, Ben Hmamou D, Hmammouchi R, Lakhlifi T, Rochdi A, El Assyry A (2014) Inhibition of carbon steel corrosion in HCL media by lipid oil melia. Mor J Chem 2:10–21Google Scholar
- Zarrouk A, Hammouti B, Touzani R, Al-Deyab SS, Zertoubi M, Dafali A, Elkadiri S (2011) Comparative study of new quinoxaline derivatives towards corrosion of copper in nitric acid. Int J Electrochem Sci 6:4939–4952Google Scholar