Prominence oscillations
- 3.2k Downloads
- 1 Citations
Abstract
Prominences are intriguing, but poorly understood, magnetic structures of the solar corona. The dynamics of solar prominences has been the subject of a large number of studies, and of particular interest is the study of prominence oscillations. Ground- and space-based observations have confirmed the presence of oscillatory motions in prominences and they have been interpreted in terms of magnetohydrodynamic waves. This interpretation opens the door to perform prominence seismology, whose main aim is to determine physical parameters in magnetic and plasma structures (prominences) that are difficult to measure by direct means. Here, we review the observational information gathered about prominence oscillations as well as the theoretical models developed to interpret small and large amplitude oscillations and their temporal and spatial attenuation. Finally, several prominence seismology applications are presented.
Keywords
Prominences Oscillations Seismology1 Prominences
Quiescent solar filaments are clouds of cool and dense plasma suspended against gravity by forces thought to be of magnetic origin. They form along the inversion polarity line in or between the weak remnants of active regions. Early observations already suggested that their fine structure is apparently composed by many horizontal and thin dark threads (Jager 1959; Kuperus and Tandberg-Hanssen 1967). More recent high-resolution \(\text {H}_{\alpha }\) observations obtained with the Swedish Solar Telescope (SST) in La Palma (Lin et al. 2005) and the Dutch Open Telescope (DOT) in Tenerife (Heinzel and Anzer 2006) have allowed to observe this fine structure with much greater detail (see Lin 2011, for a review). The measured average width of resolved thin threads is about 0.3 \(^{\prime \prime }\) (\(\sim \) 210 km), while their length is between 5 and 40 \(^{\prime \prime }\) (\(\sim \) 3500–28,000 km). The fine threads of solar filaments seem to be partially filled with cold plasma (Lin et al. 2005), typically two orders of magnitude denser and cooler than the surrounding corona, and it is generally assumed that they outline the magnetic flux tubes in which they reside (Engvold 1998; Lin 2005; Lin et al. 2005; Okamoto et al. 2007; Engvold 2008; Martin et al. 2008; Lin 2008). This idea is strongly supported by observations, which suggest that threads are skewed with respect to the filament long axis in a similar way to what has been found for the magnetic field (Leroy 1980; Bommier et al. 1994; Bommier and Leroy 1998). On the opposite, Heinzel and Anzer (2006) suggest that these dark horizontal filament structures are a projection effect. According to this view, many magnetic field dips of rather small vertical extension, but filled with cool plasma, are aligned in the vertical direction and the projection against the disk produces the impression of a horizontal thread.
Prominences are highly dynamic structures that display flows. These flows have been observed in \(\text {H}_{\alpha }\), UV and EUV lines, and their study and characterisation are of great interest for the understanding of prominence formation and stability, the mass supply and the prominence magnetic field structure. In the \(\text {H}_{\alpha }\) line, and in quiescent limb prominences, a complex dynamics with vertical downflows and upflows (Berger et al. 2008) as well as horizontal flows is often observed. The velocities are in the range between 2 and 35 \({\mathrm {km\ s}}^{-1}\), while in EUV lines flow velocities seem to be slightly higher. When comparing these values one should be aware that these lines correspond to different temperatures, so probably the reported flow speeds correspond to different parts of the prominence. In active region prominences, flow velocities seem to be higher than in quiescent prominences, even reaching 200 \({\mathrm {km\ s}}^{-1}\), and some of these high-speed flows are probably related to the prominence formation itself. In the case of filaments observed on the disk in the \(\text {H}_{\alpha }\) line, horizontal flows in the filament spine are often observed, while in barbs flows are vertical. The range of observed velocities of filament flows is between 5 and 20 \({\mathrm {km\ s}}^{-1}\). A particular feature in these observations is the presence of counter-streaming flows, i.e., oppositely directed flows (Zirker et al. 1998; Lin et al. 2003). Because of the physical conditions of the filament plasma, all these flows seem to be field-aligned. For a thorough information about flows in prominences see Labrosse et al. (2010) and Mackay et al. (2010).
Solar prominences are subject to various types of oscillatory motions. Some of the first works on this subject were concerned with oscillations of large amplitude induced by disturbances coming from a nearby flare. Later, observations performed with ground-based telescopes pointed out that many quiescent prominences and filaments display small amplitude oscillations (Harvey 1969). These oscillations have been commonly interpreted in terms of standing or propagating magnetohydrodynamic (MHD) waves, for which the relevant velocities are the Alfvén and sound speed; their typical values in quiescent prominences are of the order of 100 and 11 \({\mathrm {km\ s}}^{-1}\), respectively. Using this interpretation, a number of theoretical models have been set up in order to try to understand the prominence oscillatory behaviour. Such as we will point out in the following, the study of prominence oscillations can provide with an alternative approach for probing their internal structure. The magnetic field structure and physical plasma properties are often hard to infer directly and wave properties directly depend on these physical conditions. Therefore, prominence seismology seeks to obtain information about prominence physical conditions from a comparison between observations and theoretical models of oscillations.
The layout of the review is the following: first of all, the criteria that are used to classify oscillatory events in prominences are described. Next, observational aspects of large amplitude oscillations, together with theoretical models, are described in Sects. 3 and 4; in Sect. 5, the observational background about small amplitude oscillations is reviewed; in Sect. 6, theoretical models of small amplitude oscillations based on linear ideal MHD waves in different configurations are described; next, in Sect. 7, the damping of small amplitude prominence oscillations produced by different mechanisms is studied from a theoretical point of view; finally, in Sect. 8, prominence seismology using large and small amplitude oscillations is introduced.
2 Classification of prominence oscillations
Prominence oscillations have been classified according to different measurable quantities: period, oscillatory amplitude, polarisation of motions, prominence shape, exciter (e.g., Vršnak 1993). In Oliver (1999) we decided to use the velocity amplitude as the only classification parameter and separated prominence oscillations into small and large amplitude events, with respective amplitudes smaller than 3 \({\mathrm {km\ s}}^{-1}\) and larger than 20 \({\mathrm {km\ s}}^{-1}\). The detection of intermediate values in the last two decades reveals that the velocity amplitude alone is not enough to identify an oscillatory event. In spite of this, we maintain these two categories because they represent truly different phenomena: small amplitude oscillations are, in general, not related to flare activity and only affect a small volume of the prominence. In addition, oscillatory amplitudes are usually smaller than 10 \({\mathrm {km\ s}}^{-1}\). On the other hand, large amplitude oscillations are often associated to an energetic event that sets the full prominence (or a large part of it) into an oscillatory state. The velocity amplitude is usually larger than 10–20 \({\mathrm {km\ s}}^{-1}\). Hence, although one should probably speak of local versus global oscillatory events in prominences, we will refer to them using the original small and large amplitude denominations, respectively.
This review is mainly devoted to small amplitude oscillations, although the next two sections also deal with large amplitude oscillations.
3 Large amplitude oscillations: observational aspects
Oscillations that shake a significant part of a prominence and whose velocity amplitude is usually greater than 20 \({\mathrm {km\ s}}^{-1}\) have been observed in filaments. It was suggested that their exciter was a wave, caused by a flare, which disturbs the filament and induces damped oscillations. This hypothesis was confirmed by Moreton and Ramsey (1960), who used a refined photographic technique that permitted the observation of the propagating perturbation, with velocities in the range 500–1500 \({\mathrm {km\ s}}^{-1}\). In some cases, during the course of the oscillations, the filament becomes visible in the \(\text {H}_{\alpha }\) image when the prominence is at rest, but when its line-of-sight velocity is sufficiently large, the emission from the material falls outside the bandpass of the filter and the prominence becomes invisible in \(\text {H}_{\alpha }\). This process is repeated periodically and for this reason this type of event is called a winking filament. Ramsey and Smith (1965, 1966) and Hyder (1966) studied 11 winking filaments and the derived oscillatory velocity was quite large compared with the relevant wave speeds in prominences (namely the sound and Alfvén speeds). For this reason, one usually refers to these events as large amplitude oscillations. Furthermore, they derived oscillatory periods between 6 and 40 min, and damping times between 7 and 120 min, and reported that there seemed to be no correlation between the period and the filament dimensions, the distance to the perturbing flare or its size. In addition, a single filament perturbed by four flares during three consecutive days oscillated with essentially the same frequency and damping time in each event. As a consequence, it was suggested that prominences possess their own frequency of oscillation.
Thanks to space and ground-based instruments, observations of large amplitude oscillations have become common and the exciters seem to be Moreton or EIT waves (Eto et al. 2002; Okamoto et al. 2004; Gilbert et al. 2008; Asai et al. 2012), EUV waves (Liu et al. 2012; Shen et al. 2014a; Xue et al. 2014; Takahashi et al. 2015), shock waves (Shen et al. 2014b), nearby jets, subflares and flares (Jing et al. 2003, 2006; Vršnak et al. 2007; Li and Zhang 2012), while in other cases the oscillations are associated to the eruptive phase of a filament (Isobe and Tripathi 2006; Isobe et al. 2007; Pouget 2007; Chen et al. 2008; Foullon et al. 2009; Bocchialini et al. 2011). Although in most of the observed flare-induced filament oscillations the material undergoes vertical oscillations (Eto et al. 2002; Okamoto et al. 2004; Shen et al. 2014a), other authors (Kleczek and Kuperus 1969; Hershaw et al. 2011; Gosain and Foullon 2012; Liu et al. 2012; Shen et al. 2014b) have also reported horizontal oscillations. Moreover, periodic motions along the longitudinal filament axis (Jing et al. 2003, 2006; Vršnak et al. 2007; Li and Zhang 2012; Zhang et al. 2012; Luna et al. 2014; Shen et al. 2014b) as well as oscillations having a mixed character (Gilbert et al. 2008) have also been observed. Some of the above mentioned observations were already described in the review by Tripathi et al. (2009), therefore, in this section we will only take into account observations not covered in that review. These observations will be split according to features such as the polarisation of the oscillatory motions or whether the events take place during a prominence eruption.
3.1 Vertical oscillations
3.2 Transverse (horizontal) oscillations
Liu et al. (2012) reported the detection of quasi-periodic wave trains within the broad pulse of a global EUV wave, these wave trains induced transverse oscillations, like fast kink modes, of local structures such as a flux-rope coronal cavity and its embedded filaments. They selected three dark filament threads, embedded in the coronal cavity, as tracers of the oscillations and obtained the space-time position at the centre of each thread which was fitted with an exponentially damped sine function. Although the filaments were located at different positions, the fitted parameters were in a narrow range, suggesting a coherent behaviour consistent with the global oscillations of the full cavity. The found average values were: period 28 min, damping time 120 min, and initial velocity amplitude 9 \({\mathrm {km\ s}}^{-1}\). This event was re-analysed by Gosain and Foullon (2012) who focused on transverse large-scale prominence oscillations, investigating also the effect of the two-component EUV coronal wave. Initially, the prominence oscillated in a coherent way but, later on, thread oscillations became out of phase loosing their identity (Fig. 3). The global transverse oscillation suggested the presence of a global kink mode while the non-collective behaviour was probably due to the inhomogeneous prominence structure. After fitting a damped cosine function to a time–distance plot, they obtained a period of about 28 min, a damping time of 44 min and a maximum speed amplitude of 11 \({\mathrm {km\ s}}^{-1}\). These authors suggested that prominence oscillations were excited by the arrival of a fast EUV wave. After this excitation, the later arrival of the slow EUV wave to an already oscillating filament acted as a secondary trigger producing a change in the oscillatory phase. It must be noticed that in both studies reported above, the determined velocity amplitudes are small while the oscillations were global (see Sect. 2). Finally, using data from AIA/SDO, Xue et al. (2014) analysed the time behaviour of two filaments located in an active region. After the occurrence of a flare, one filament erupted and, at the same time, an EUV wave started to propagate from the active region. When the EUV wave swept the second filament, transverse oscillations were induced in it although it was difficult to determine if the whole filament was oscillating. With the fit of an exponentially decaying harmonic function, they obtained a period of 1140 s, a damping time of 5920 s and an initial amplitude of 2.17 Mm, and concluded that the oscillations were produced by a fundamental standing kink wave.
3.3 Longitudinal oscillations
3.4 Simultaneous excitation of transverse and longitudinal oscillations in prominences
Shen et al. (2014b) presented interesting observations of simultaneous transverse oscillations of a prominence and a filament together with longitudinal oscillations of another filament detected on 2011 August 9. These oscillations were induced by a single shock wave, associated to an X6.9 flare, which was observed as a Moreton wave in H\({\alpha }\). Transverse oscillations of the prominence were measured at three different heights above the limb and time–distance diagrams, using AIA 193 Å and H\({\alpha }\) images, were constructed which allowed to determine the trajectory of the oscillating prominence and the velocity profile. The results showed that the transverse oscillations were initiated once the shock wave reached the prominence, and that the oscillatory amplitude at high altitudes was larger than at low heights. Next, by combining transverse and Doppler velocity components, the full three-dimensional velocity was obtained and the velocity profiles were fitted with an exponentially decaying sine function which allowed to obtain periods, damping times and initial amplitudes at different heights. These fittings showed that while the velocity amplitude is larger at high altitude, the oscillatory periods remained the same and equal to 13.5 min, however, the damping time was larger at higher altitude than at lower heights. Regarding the longitudinal oscillations observed in the filament, they were also produced by the passing of the shock wave, and from the STEREO-Ahead observations it could be seen that the wave first interacted with one of the ends of the filament and, then, part of the filament mass started to oscillate along the main axis. A time–distance diagram along the filament axis was generated, and the velocity profile was fitted, again, with an exponentially decaying sine function. The results showed that the filament described four oscillatory cycles with a period of about 80 min and an initial amplitude of 27 \({\mathrm {km\ s}}^{-1}\). Weak transverse oscillations of another filament were also observed, however, it seems that in this case the incoming wave suffered reflection processes in open magnetic fields located close to this filament, which reduced the wave speed and, accordingly, the energy of the wave hitting the filament was smaller than in the other studied cases. As an attempt to explain in a qualitative way the observed events, Shen et al. (2014b) illustrated the interaction process between the shock wave and the prominence/filament by means of a cartoon (see Fig. 5) showing how this interaction produced the observed transverse and longitudinal oscillations observed in the prominence and filaments, respectively. In this case, this cartoon points out the importance of the orientation of the prominence/filament with respect to the incoming disturbance. However, this does not seem to be enough since, such as it is shown in Shen et al. (2014a), some filaments remain unperturbed despite being located close to the site where the triggering event takes place. In this sense, one should expect the trapping of a certain amount of energy of the incoming perturbation by the filament. However, what remains to be determined is the efficiency of this trapping by the magnetic configuration of the filament as well as if the injected energy is enough to trigger or not the oscillations.
3.5 Oscillations in erupting filaments
The presence of large amplitude oscillations in erupting filaments has also been reported (Isobe and Tripathi 2006; Isobe et al. 2007; Pouget 2007; Pintér et al. 2008; Chen et al. 2008; Bocchialini et al. 2011). They have been used to perform prominence seismology and as a diagnostic tool for the stability of prominences. Some of these observations together with the conclusions obtained were already summarised in Tripathi et al. (2009), however, it is worth to mention here three further observations about this phenomenon. Using SUMER/SOHO, Chen et al. (2008) observed oscillations in a prominence followed by its eruption. They performed 11 h of spectroscopic observation and the prominence oscillated during 4 h. The analysis of the Doppler velocity time series indicated that two different periods, around 20 and 60 min, were present, while the velocity amplitude was in the range 10–30 \({\mathrm {km\ s}}^{-1}\). Later on, the prominence erupted as a blob-like CME. Bocchialini et al. (2011) analysed datasets corresponding to two different filaments observed on 2003 May 30 and 1994 September 18. Two different data sets were used: time series of spectra using He I and Mg X spectral lines measured with CDS/SOHO for the first filament, and time series of intensity and velocity images in \(\text {H}_{\alpha }\) line-wings from NSO, for the second filament. In the case of the filament observed in He I and Mg X when the intensity data were considered, two different oscillatory periods appeared in the wavelet analysis for each of the spectral lines, when different time intervals are considered. However, in the Doppler velocity data a common period about 20 min was present, although in the Mg X line another period around 10 min was also found. Regarding the Doppler velocities obtained from the different lines, they were in phase, which seems to indicate that the close overlying corona is affected by filament oscillations and, also, they were quickly damped. A more careful analysis pointed out that the velocity signal in He I could be split in two parts with two very different periods. As a summary, in intensity the periods were in the range 20–30 min although periods longer than 80 min were also detected, while in He I the velocity amplitude was about 12 \({\mathrm {km\ s}}^{-1}\) with a damping time of 25 min. An increase of the period was also observed by Bi et al. (2014) when longitudinal oscillations and mass drainage were detected during the slow rising motion of a pre-eruptive filament. In the case of the \(\text {H}_{\alpha }\) filament (Bocchialini et al. 2011), the results revealed a very complex dynamic behaviour with parts of the filament moving upwards while other parts were moving downwards and no clear oscillatory pattern was observed. Using 171 Å images from SDO/AIA, Joshi et al. (2016) have analysed the activation and eruption of a quiescent filament observed on 2013 August 14. Only the western segment of the filament suffered the activation process in the form of oscillations in thin and long features oriented almost perpendicular to the filament’s spine and similar to barbs. Transverse oscillations were observed when the slit was placed along the spine with a period between 60 and 90 min and a velocity amplitude of about 3–5 \({\mathrm {km\ s}}^{-1}\) in the plane of the sky. These oscillations lasted for about 30 h and, along this time, the filament was slowly rising, which seems to be a common feature of filaments undergoing oscillations before eruption. Finally, only this part of the filament erupted. In the above reported cases, the detected velocity amplitude is smaller than or slightly greater than 20 \({\mathrm {km\ s}}^{-1}\) but the oscillations affected a substantial part of the filament (see Sect. 2).
4 Large amplitude oscillations: theoretical models
From the theoretical point of view, different models trying to explain the excitation, restoring forces and damping mechanisms of large amplitude oscillations have been put forward. The theoretical complexity of these models has been growing with time from analytical models, based on the harmonic oscillator, up to one dimensional numerical models, whose purpose is to describe longitudinal oscillations. Furthermore, two dimensional numerical models have been also developed which allow to describe in a more complete way the features of the observed oscillations. In the following, we describe, for the different types of large amplitude oscillations, the proposed theoretical models.
4.1 Vertical oscillations
4.2 Transverse (horizontal) oscillations
4.3 Longitudinal oscillations
In the case of large amplitude longitudinal oscillations observed by Jing et al. (2003, 2006), several possible driving mechanisms, such as gravitational force, pressure imbalance and magnetic tension, were suggested by these authors. Each mechanism was analysed in detail concluding that if gravity was responsible for the oscillations, then, a dipped magnetic configuration was needed. For instance, the depth of the magnetic dips required to explain gravity induced motions was estimated to be 10% of the whole length of the magnetic field lines. Regarding the siphon-like mechanism (pressure-driven motion), it was a possible explanation since the observed motions were along the magnetic field lines and the triggering events were close to the footpoints which could cause a pressure imbalance. However, this mechanism lacks the restoring force needed to explain the large amplitude oscillations. Finally, it is also difficult to attribute the longitudinal oscillations to the magnetic tension since this force produces motions perpendicular to the local magnetic field. As potential damping mechanisms they considered radiative damping and wave leakage (Kleczek and Kuperus 1969).
Regarding the damping mechanism, Ruderman and Luna (2016) have studied the damping of longitudinal oscillations of a prominence thread produced by mass accretion. They have considered a simple model in which the prominence thread, made of cold plasma, occupies the central part of a thin curved magnetic flux tube, while the two lateral sides of the tube are filled with hot rarefied plasma. The main assumptions of the model are that there are flows of rarefied plasma, moving towards the cold plasma, which are caused by plasma evaporation at the footpoints of the tube, and that, after its arrival, this hot plasma in instantaneously added to the thread becoming its temperature and density equal to those of the thread. Once the system of differential equations describing the thread dynamics was derived, it was solved for two different geometries of the flux tube. In both cases, the damping time is inversely proportional to the accretion rate which allows to determine the mass accretion rate once the damping time has been determined. From the results, Ruderman and Luna (2016) concluded that mass accretion could be a suitable mechanism to explain the strong damping observed in large amplitude longitudinal oscillations.
Related with longitudinal oscillations, Terradas et al. (2013) made a numerical study of two-dimensional prominence magnetohydrostatic models under the presence of gravity. The initial equilibrium was an isothermal stratified atmosphere permeated by a force-free magnetic field represented by a superposition of arcade solutions. Later, in order to generate the prominence, mass was added at a given location in the preexisting magnetic configuration. Then, once the prominence reached an equilibrium, Terradas et al. (2013) studied its oscillatory behaviour by solving the linearised MHD equations around this final equilibrium. Slow magnetoacoustic-gravity waves were investigated by introducing a horizontal perturbation which excites the whole prominence body, producing motions along the magnetic field lines. From the numerical simulations, they obtained the periods for these field-aligned oscillations which were compared to those obtained using Eq. (4) from Luna and Karpen (2012) and Luna et al. (2012a). The comparison shows a strong disagreement between both periods (see Fig. 19 in Terradas et al. 2013). This lack of agreement could be due to the different physical properties (constant versus non constant radius of curvature, no variation versus variation of magnetic field along the field lines, non isothermal versus isothermal) of the models used by Luna and Karpen (2012), Luna et al. (2012a) and Terradas et al. (2013). As a consequence, these results cast doubts about the role played by gravity as a driver of longitudinal oscillations at least in the configuration studied by Terradas et al. (2013).
Zhang et al. (2012) performed 1D radiative hydrodynamic numerical simulations assuming a dipped magnetic field. In the simulation, a background heating is imposed to maintain the corona-chromosphere structure, and a further localised heating is added at the chromospheric level at the two footpoints of the magnetic field line. Then, chromospheric plasma is heated and evaporated into the corona and once a thermal instability starts in the corona the evaporated mass cools down and condenses forming the prominence. Later, the localised heating is switched off and an oscillation is excited with an initial velocity of 40 \({\mathrm {km\ s}}^{-1}\). Zhang et al. (2012) compared the results of the simulations with the oscillations in the active region prominence observed on 2007, February 8 and found that while the oscillatory period was similar, the damping time was 1.5 times greater than the observed one. The restoring forces of the oscillations were assumed to be the field-aligned component of gravity and the gas pressure gradient, however, from the simulations they concluded that the main restoring force is the gravity component. In these simulations, the damping mechanisms were thermal radiation and heat conduction, although they could not fully explain the observed damping.
With the help of radiative hydrodynamic numerical simulations, Zhang et al. (2013) performed a parametric study, which included chromospheric heating duration, initial velocity and field line geometry, of longitudinal oscillations in a filament. The oscillations were excited either by a velocity perturbation or by an impulsive heating near one of the footpoints of the magnetic configuration. The results indicated that the oscillatory period did not strongly depend on the trigger mechanism and only showed a weak dependence on the length and height of the prominence, and on the amplitude of the perturbations. Also, a scaling law for the damping time was obtained which showed a strong dependence on the length, the geometry of the magnetic dip and the width. These results allowed to conclude that the oscillations depend on the prominence itself and the magnetic field configuration, although in the case of the impulsive heating only four percent of the energy is converted into kinetic energy of the prominence. Regarding the restoring force, these authors concluded, again, that the field-aligned component of gravity was dominant over gas pressure gradient, and that only when the prominence is short gas pressure gradient plays a role. Using this conclusion, an expression for the oscillatory period could be computed which gave the same expression obtained by Luna and Karpen (2012), consistent with the linear theory of a pendulum. Finally, from the simulations they concluded that non adiabatic processes, such as radiative losses, were responsible for the observed damping, although mass drainage from the prominence to the chromosphere would also contribute significantly to the damping. The above reported numerical simulations assume that there is only one dip in the magnetic field line in which the filament thread is located. However, some theoretical models have suggested the existence of double dips along a magnetic field line, which would allow the presence of two separate threads interacting with each other through oscillations. Using this magnetic configuration, Zhou et al. (2017) have performed 1D radiative hydrodynamic numerical simulations including optically thin radiation, thermal conduction and a heating term, which decays exponentially with distance, helping to maintain the hot corona. The formation of threads in the magnetic dips is produced by increasing the density and decreasing the temperature along the two dips and, once an equilibrium state is reached, the threads are perturbed by imposing a velocity perturbation on them. For this study, Zhou et al. (2017) considered three different cases: identical dips and initial perturbation imposed in only one thread; two differents dips and initial perturbation imposed in only one thread; and two different dips and perturbations imposed simultaneously in both threads, then, the results allow to extract conclusions about the behaviour of period and damping time of the oscillating threads. For instance, in the first case, energy is pumped from the active (initially excited) to the passive thread, and the oscillation of the passive thread decays very slowly with a damping time much longer than in the case of a single dip, furthermore, after some time, the oscillations of both threads become synchronous. When two threads on non-identical dips are perturbed simultaneously, the oscillation of the thread with shorter period (smaller curvature radius) decays quickly and, after a few periods, keeps almost the same amplitude. This means that energy is initially transferred from the shorter period thread to the longer period thread whose oscillatory behaviour can be fitted with a decaying sine function while its damping time increases because of the thread–thread interaction. However, in order to explain the almost constant amplitude of the shorter period thread it is suggested that, later on, kinetic energy is transferred back from the longer period thread to the shorter period thread. As a consequence, its oscillation becomes almost decayless and can not be fitted either by a decaying sine function or a Bessel function. This would mean that dissipative or radiative losses from the shorter period thread are compensated by this input of energy. In general, although there are some exceptions, while the damping time of each oscillating thread is affected by the thread–thread interaction, the period of the filament longitudinal oscillation is only slightly affected by this interaction. These results point out the need to have a good knowledge of the filament magnetic configuration, since it could be of great importance for the interpretation of the observed oscillatory behaviour and to perform seismological studies.
On the other hand, longitudinal oscillations have also been suggested as the origin of counter-streaming flows observed in prominences (Zirker et al. 1998). Thermal non-equilibrium models for filament mass formation (Xia et al. 2011; Luna et al. 2012a; Zhang et al. 2012) predict that after its formation, the cool condensations would oscillate around the magnetic dips. Therefore, counter-streaming might be understood in terms of an ensemble of out of phase oscillating threads.
4.4 Oscillations of line current models
A completely different approach, based on line current models of filaments, was taken by Oord and Kuperus (1992), Schutgens (1997a, b) and Oord et al. (1998) in order to study filament vertical oscillations. They used the model introduced by Kuperus and Raadu (1974), in which the prominence is treated as an infinitely thin and long line, i.e., without internal structure. The interaction of the filament current with the surrounding magnetic arcade and photosphere was taken into account. Furthermore, both normal (NP) and inverse polarity (IP) configurations were considered. When a perturbation displaces the whole line current representing the filament, that remains parallel to the photosphere during its motion, the coronal magnetic field is also disturbed and the photospheric surface current is modified. This restructuring affects the magnetic force acting on the filament current. As a consequence, either this force enhances the initial perturbation and the original equilibrium becomes unstable, or the opposite happens and the system is stable against the initial disturbance. As a further complication, Oord and Kuperus (1992), Schutgens (1997a, b) and Oord et al. (1998) took into account the finite travel time of the perturbations between the line current and the photosphere and investigated the effect of these time delays on the filament dynamics. For both NP and IP configurations, exponentially growing or decaying solutions were found.
Schutgens and Tóth (1999) considered an IP magnetic configuration in which the prominence is not infinitely thin but is represented by a current-carrying cylinder. They solved numerically the magnetohydrodynamic equations assuming that the temperature has a constant value (\(10^6\) K) everywhere. The inner part of the filament is disturbed by a suitable perturbation that causes the prominence to move like a rigid body in the corona, both vertically and horizontally, undergoing exponentially damped oscillations. Horizontal and vertical motions can be studied separately since they are decoupled. It turns out that the period and damping time of horizontal oscillations are much larger than those of vertical oscillations. Some remarks about the damping mechanism at work in these models are presented in Sect. 7.8.
Kolotkov et al. (2016) considered an equilibrium configuration similar to that in the works described above: the prominence line current is embedded in a coronal magnetic structure created by two photospheric line currents symmetrically placed with respect to the prominence current. Kolotkov et al. (2016) studied the linear oscillations of the system, so that horizontal and vertical motions are decoupled, and found stability conditions and the (stable) periods for the two orientations of motions. Depending on the parameter values of the model (prominence height, intensity of the photospheric and prominence line currents, separation of the photospheric currents) the prominence can be stable or unstable to vertical and/or to horizontal oscillations. It is found that the prominence can be simultaneously stable to oscillations in both directions when its current is larger than that of the photospheric sources and its height is smaller than half the distance between the photospheric currents.
4.5 Final remarks
Theoretical models developed to understand large amplitude oscillations, and to perform prominence seismology, can be classified in two different groups. For transverse (vertical or horizontal) oscillations, Hyder (1966) and Kleczek and Kuperus (1969) models are based on damped harmonic oscillators, with the restoring force supplied by the magnetic tension, and with different damping mechanisms. For longitudinal oscillations, Vršnak et al. (2007) and Luna and Karpen (2012) models have been considered although, taking into account observations and numerical simulations, the Luna and Karpen (2012) pendulum model seems to be the most suitable and, also, it allows to infer filament’s geometry. However, oscillations with different polarisation (longitudinal and transverse) of the motions in the same filament have also been observed (Gilbert et al. 2008). An important issue, relevant for this type of oscillations, is to understand how are they generated. Probably, in all the cases, to obtain a full understanding we should resort to numerical simulations by considering that incoming linear or non-linear perturbations (waves) can strongly perturb the prominence global configuration causing the observed oscillations. Then, different situations such as: incidence angles of incoming perturbation; energy budget of the perturbation; distance from the prominence at which the perturbation is generated; background properties of the medium (magnetic field, density, inhomogeneity) in which the perturbation is travelling; amount of perturbation’s energy which is trapped by the prominence, etc., could be studied in order to understand the polarisation of the induced oscillations and how are they damped. Finally, MHD models which involve the presence of oscillations have also been proposed. For instance, Sakai et al. (1987) developed a model for the formation of a prominence in a current sheet and one of its features was the presence of non-linear oscillations of the current sheet, while Bakhareva et al. (1992) considered a partially ionised plasma and developed a dynamical model for a solar prominence in which non-linear oscillations were also present; finally, Chin et al. (2010) considered possible oscillatory regimes of non-linear thermal over-stability which can occur in prominences.
5 Small amplitude oscillations: observational aspects
The main purpose of studying prominence oscillations is to obtain insight into their physics via a seismological approach (see Sect. 8). Therefore, the information that observations should provide with are the periods, wavelength, phase and group velocity and damping time of these phenomena. In addition, observations should also determine whether these periodic variations are standing oscillations or propagating waves, whether they affect some prominence threads or larger areas of a prominence, whether threads oscillate independently from their neighbours or which physical variables are disturbed and by which amount.
Attempts to detect prominence oscillations do not always yield positive results. For example, Harvey (1969) noted that in a sample of 68 non-active region prominences, 31% of the objects presented no significant velocity change along the line-of-sight, 28% showed apparently random line-of-sight velocity variations and 41% presented a definite oscillatory behaviour. Analogous results were obtained for a set of 45 active region prominences. Later, Engvold (1981) failed to detect oscillatory motions in the velocity field of a limb prominence, although the observational setup used prevented him from reliably distinguishing velocity amplitudes below 2 \({\mathrm {km\ s}}^{-1}\), the range in which many peak values are found. In addition, Malherbe et al. (1981, 1987) recognised no oscillatory pattern in time series of line-of-sight velocities obtained with the MSDP operating on the Meudon solar tower, although positive results were later achieved using the same instrument (Thompson and Schmieder 1991). There are several reasons that may lead to the absence of periodic variations in some prominences when using spectroscopic techniques: the velocity amplitude or its projection along the line-of-sight may be too small to stand above the instrumental noise level; or the prominence material may actually not oscillate at the time the observations are performed; or the light emitted or absorbed by various plasma elements along the line-of-sight and having different oscillatory properties may result in a signal below the detection threshold.
Some authors have expressed concerns about the credibility of detected prominence oscillations with spectrograph slits. This led Balthasar et al. (1993) and Zapiór et al. (2015) to make simultaneous observations with two telescopes to firmly establish the solar origin of the oscillations. In both cases, only a few coinciding oscillatory periods were present in the two data sets, and so this can raise some concerns about the authenticity of prominence oscillations. In the first case, data acquisition in both telescopes (VTT and GCT in Tenerife, Spain) was done with the help of a spectrograph. Hence, it may be argued that the discrepancy of the results could have been caused by guiding errors. Zapiór et al. (2015), however, employed two-dimensional Doppler velocities obtained with the MSDP spectrograph of the Large Coronagraph (Białków Observatory, Poland) together with one-dimensional Doppler data from the HSFA-2 multichannel spectrograph of the Large Horizontal Telescope (Ondřejov Observatory, Czech Republic). Spectra were taken with the latter instrument by placing the spectrograph slit at three positions. After these data had been reduced, they were shifted to a common reference frame with the help of the two-dimensional MSDP data, hence eliminating possible alignment errors between the MSDP and HSFA-2 data sets. It was found that three particular periods (of 26, 31 and 55 min) were present in both data sets and so unquestionably originated in the prominence, but many other periodicities were exclusively present in only one of the two data sets, and for this reason were considered spurious. Hence, the main conclusion reached by Zapiór et al. (2015), beyond the particular periods observed, is that to confirm the solar origin of a periodicity, it must correspond to a coherent signal distributed over a prominence area, such as would be the case of a standing or a propagating wave.
5.1 Detection methods
Regarding spectroscopic observations, different setups have been used to gather the temporal variation of the spectral indicators and more complexity and refinement has been gained over the years. A very widely used method in the investigation of small amplitude prominence oscillations is to place a spectrograph slit on a prominence (a few examples from a very long list are Tsubaki and Takeuchi 1986; Suematsu et al. 1990; Balthasar et al. 1993; Balthasar and Wiehr 1994; Suetterlin et al. 1997). Then, this yields a time series of spectra on each slit position (see for example, Fig. 4 of Tsubaki and Takeuchi 1986), from which the temporal variation of the spectral indicators (Doppler shift, line intensity, integrated line intensity, line width) can be derived. These time series can be later analysed to obtain the period, wavelength, etc. of the oscillations (an example is shown in Fig. 5 of Tsubaki and Takeuchi 1986). Slit observations have also been conducted from space, using SOHO/SUMER (Blanco et al. 1999; Régnier et al. 2001) and SOHO/CDS (Pouget et al. 2006).
A spectroscopic observation using a slit yields restricted information on the spatial distribution of oscillations and, what is even worse, does not ensure that the slit is fixed during the observing time. The first of these concerns also applies to the analysis of images in which only variations in one direction are considered. Observations using a two-dimensional field of view and with high spatial resolution have diminished these worries, while allowing to study how prominence threads participate of the oscillatory motions. These observations have been conducted both with ground-based telescopes (Yi et al. 1991; Yi and Engvold 1991; Lin et al. 2003; Lin 2005; Lin et al. 2005, 2007, 2009) and with space-based telescopes (Okamoto et al. 2007, 2015); the relevant works are presented in Sect. 5.9.4. In addition, two-dimensional Dopplergrams have also been employed (Molowny-Horas et al. 1999; Terradas et al. 2002), although the spatial resolution of this particular observation is not good enough to appreciate the prominence thread structure; see Sect. 5.9.3.
Although most data used in the analysis of small amplitude prominence oscillations come from typical prominence lines, in some cases spectral lines formed at hotter temperatures have also been considered. Examples are the He i line at 584.33 Å, formed at 20,000 K (Régnier et al. 2001; Pouget et al. 2006); the Si iv and O iv lines at 1393.76 Å and around 1401–1405 Å, formed at transition region temperatures (Blanco et al. 1999; Okamoto et al. 2015); and 195 Å images, with a formation temperature of 1.5 MK (Foullon et al. 2004). Cool prominences or filaments can be identified in coronal lines since the line intensity is reduced by means of two different mechanisms: absorption and volume blocking (Anzer and Heinzel 2005). In the first case, coronal radiation coming from behind the cool structure is partially absorbed, while in the second case the volume filled with cool plasma does not contribute to coronal emission and in this region the radiative output is reduced as compared with the surrounding corona. These two mechanisms give place to a brightness reduction of coronal lines and allows us to identify the volume occupied by cool and dark structures like prominences or filaments. Arguably, oscillations in the dense prominence affect their rarer neighbourhood, so a joint investigation of the dynamics of the two media has a very promising seismological potential.
5.2 Spectral indicators
The vast majority of spectroscopic reports of prominence oscillations are based on the analysis of the Doppler velocity. Some other spectral indicators (line intensity and line width) have also been used in the search for periodic variations in prominences and sometimes a periodic signal has been recognised in more than one of these indicators. Landman et al. (1977) observed periodic fluctuations in the integrated line intensity and line width with period around 22 min, but not in the Doppler shift. In addition, Yi et al. (1991) detected periods of 5 and 12 min in the power spectra of the line-of-sight velocity and the line intensity. Also, Suematsu et al. (1990) found signs of a \(\sim \) 60 min periodic variation in the Doppler velocity, line intensity and line width. Nevertheless, the Doppler signal also displayed shorter period variations (with periods around 4 and 14 min) which were not present in the other two data sets. We here encounter a common feature of other investigations, namely that the temporal behaviour of various indicators corresponding to the same time series of spectra do not agree, either because they show different periods in their power spectra (as in Tsubaki et al. 1987) or because one indicator presents a clear periodicity while the others do not (Wiehr et al. 1984; Tsubaki and Takeuchi 1986; Balthasar et al. 1986; Tsubaki et al. 1988; Suetterlin et al. 1997). Only rarely have the oscillations been detected in several of these spectral indicators at the same time and with the same period, which constitutes a puzzling feature of prominence oscillations. This can be caused by insufficient instrumental sensitivity or by the effect different waves have on the plasma parameters (pressure, magnetic field, ...), which in turn may give rise to perturbations of one spectral indicator alone. This issue has been addressed recently by Heinzel et al. (2014) and Zapiór et al. (2016), who computed synthetic hydrogen spectra of prominence oscillations by means of a combination of MHD and radiative transfer modelling (see Sect. 6.6).
Special mention must be made of the study performed by Balthasar and Wiehr (1994), who simultaneously observed the spectral lines He at 3888 Å, \(\text {H}_8\) at 3889 Å and Ca\(^+\)IR\(_3\) at 8498 Å. From this information they analysed the temporal variations of the thermal and non-thermal line broadenings, the total \(\text {H}_8\) line intensity, the He 3888 Å to \(\text {H}_8\) emission ratio and the Doppler shift of the three spectral lines. The power spectra of all these parameters yield a large number of power maxima, but only two of them (with periods of 29 and 78 min) are present in more than one indicator.
5.3 Trigger of small amplitude oscillations
So far it has not been possible to unambiguously identify the trigger of small amplitude oscillations. A popular conjecture about their excitation is that it lies in the periodic motions of magnetic fields caused by photospheric or chromospheric oscillations. The idea is that Alfvén waves ought to propagate upwards and that any prominence material threaded by the field should also be subject to periodic motions if there is enough energy available to overcome the inertia of the dense plasma (Harvey 1969); this idea was later suggested by other authors too (e.g., Yi et al. 1991). Harvey made order-of-magnitude calculations to show that the ratio of prominence to photospheric oscillatory energy is around or smaller than \(10^{-4}\), which indicates that this excitation mechanism is feasible. Much longer and shorter periods than those present in Harvey’s work have been detected afterwards (see Sect. 5.4), so probably this mechanism of energy transfer from the photosphere (or chromosphere), if correct, may not be the only one to cause these prominence oscillations.
Further evidence of the photospheric origin of some prominence oscillations was given by Li and Zhang (2013), who used SDO/AIA 171 Å data of a polar crown prominence observed during six consecutive days. In their sample of 58 barbs, all of them featured transverse oscillations, which in some cases were excited by propagating disturbances emitted by neighbouring small-scale photospheric brightenings. Moreover, Mashnich et al. (2009b, 2009a) studied the Doppler velocity field in some filaments and the underlying photosphere by means of simultaneous observations of the \(\text {H}_{\beta }\) line and the neighbouring photospheric Fe i line at 4863 Å. They detected a quasi-hourly oscillation in certain areas of the filaments and photosphere and found a good spatial correlation between them. They also reported that the parts of the photosphere displaying this oscillation were often observed below filament barbs. The spatial coincidence of this periodicity and the relation of filament barbs and the photosphere led these authors to suggest that the photosphere was the origin of these particular prominence oscillations. From an observation of a limb prominence with Hinode/SOT, Ning et al. (2009b) reported that the detected oscillatory behaviour only lasted about one period and that new oscillations appeared nearby simultaneously. These authors then concluded that the exciters or drivers of such oscillations are numerous and of small scale.
5.4 Detected periods
At this point it may seem that a prominence can only sustain a few oscillatory periods, but Hillier et al. (2013) (see Sect. 5.3 for more information on their observation and data analysis) proved that the threads of a single prominence can support a wide range of periods: from 50 s (the minimum value permitted by the analysis method used) to 6000 s, although one may wonder if threads can live long enough to sustain such long period oscillations. The period distribution shows no preference for values around 3 or 5 min: see Fig. 9 (left). More evidence on the ability of prominences to support many periodicities comes from the study of a polar crown prominence in which 58 barbs underwent transverse periodic motions (Li and Zhang 2013). The period distribution, presented in Fig. 9 (right), covers the range 12.6–54.6 min. One can think of several reasons for this variety of periods: it is possible that the detected events are driven by, e.g., photospheric motions. In such a case, the oscillatory period revealed by the dense structure is a consequence of the driving period. On the other hand, if oscillations are impulsively triggered then their periods correspond to those of the excited normal modes, which depend on the intrinsic properties of each thread or barb. Furthermore, structural changes can take place that can modify the (normal mode) oscillatory period of a barb or a thread, specially in the very long (6 days) observations of (Li and Zhang 2013). The last hypothesis may not be true in some occasions, in which a given prominence has been observed over a few consecutive days and the outcome is that the same period seems to be recovered (Bashkirtsev and Mashnich 1984; Mashnich and Bashkirtsev 1990; Suetterlin et al. 1997). This seems to indicate that the overall properties of these prominences did not change much over this time interval. Similar studies have not been carried out afterwards.
5.4.1 Correlations between period and other parameters
Harvey (1969) reported a correlation of the period with the unperturbed longitudinal magnetic field, such that long periods are associated with strong field strengths (Fig. 11). This dependence is difficult to understand since, other parameters being equal (density, magnetic field line length, etc.), one expects just the inverse behaviour for fast MHD waves, and no dependence of the period on the magnetic field strength for slow MHD waves.
5.5 Oscillatory amplitude
The detected peak Doppler velocity usually ranges from the noise level (down to 0.1 \({\mathrm {km\ s}}^{-1}\) in some cases) to 2–3 \({\mathrm {km\ s}}^{-1}\) (e.g., Harvey 1969), although larger values have also been reported (e.g., Bashkirtsev and Mashnich 1984; Molowny-Horas et al. 1999; Ning et al. 2009a).
Another statistical study, by Li and Zhang (2013) on transverse oscillations of 58 barbs, also reveals a large spread of displacement and velocity amplitudes; see Fig. 12 (bottom). In particular, these parameters are in the range 1.2–4.2 Mm and 2.9–12.4 \({\mathrm {km\ s}}^{-1}\), respectively. Li and Zhang (2013) noted that the oscillatory amplitude was in general considerably larger than the barb width in the 171 Å images. The spatial resolution of these images probably makes it impossible to detect smaller amplitude oscillations, such as those identified by Hillier et al. (2013).
5.6 Spatial distribution of oscillations
Obviously, a two-dimensional data set is much more advantageous when it comes to ascertaining which part of a prominence is affected by oscillations. Terradas et al. (2002) reported on the propagation of waves over a large region (some 54,000 km by 40,000 km in size) in a limb prominence and high spatial resolution observations with Hinode/SOT (Berger et al. 2008) also show oscillations that affect a small area of a prominence. See also the discussion in Sect. 5.9.4 of the work by Lin et al. (2007) that gives evidence of coherent Doppler shift oscillations over a rectangular area 3.4 \(^{\prime \prime }\) \(\times \) 10 \(^{\prime \prime }\) in size.
Other observations with high spatial resolution have shown that individual threads or small groups of threads may oscillate independently from the rest of the prominence with their own periods (Thompson and Schmieder 1991; Yi et al. 1991). Figure 13 displays some of the results in Yi et al. (1991). It is clear that thread groups 1, 4, 13 and 14 oscillate in phase with their own period, which ranges from 9 to 14 min. In addition, Tsubaki et al. (1988) obtained successively two time series of spectra by placing the spectrograph slit first at a height of 30,000 km above the solar limb and next 40,000 km above the limb. A group of vertical threads detached from the prominence main body displayed 10.7-min periodic variations at both heights, which was a first indication that threads can oscillate collectively. After these preliminary studies, much attention has been given to the detection of thread oscillations (Lin et al. 2003; Lin 2005; Lin et al. 2005, 2007, 2009; Okamoto et al. 2007; Ning et al. 2009a, b; Okamoto et al. 2015). Apart from reporting on thread oscillations, these works have also given detailed information about wave features such as the period, wavelength and phase speed. Because of the importance of these quantities in the seismology of prominences, these works are discussed in more detail in Sect. 5.9.4.
There is also some evidence that velocity oscillations are more easily detected at the edges of prominences or where the material seems fainter, while they sometimes look harder to detect at the prominence main body (Tsubaki and Takeuchi 1986; Tsubaki et al. 1988; Suematsu et al. 1990; Thompson and Schmieder 1991; Terradas et al. 2002). This result has occasionally been interpreted as the consequence of integrating the velocity signals coming from various moving elements along the line-of-sight. This explanation, however, would imply the presence of broader spectral lines at the positions showing periodic variations, which is not observed, so other explanations are also possible (Suematsu et al. 1990). Mashnich et al. (2009b, 2009a) gave evidence that different parts of filaments may support different periodicities: short-period variations (with periods shorter than 10 min) had coherence scales shorter than 10 \(^{\prime \prime }\) and were detected near the edges of filaments placed close to the Sun’s central meridian. These oscillations, hence, were characterised preferentially by vertical plasma displacements. On the other hand, variations with period around 1 h occured in different positions of the filament and the size of the oscillating area was not larger than 15–20 \(^{\prime \prime }\). In addition, these oscillations had an amplitude that increased by an order of magnitude or more in filaments far from the solar centre compared to those near the centre of the Sun’s disk. Then, these oscillations showed a mainly horizontal velocity.
5.7 Polarisation of wave motions
The use of spectral techniques alone (as in the vast majority of observational works on small amplitude oscillations) only allows to determine the presence of a velocity component parallel to the line-of-sight. This information can be used to conjecture about the orientation of plasma motions with respect to the prominence sheet (e.g., longitudinal, transverse) or thread (horizontal, vertical or inclined), but no firm conclusion on the three-dimensional direction of motions can be reached.
Using data from the Swedish 1-m Solar Telescope in La Palma, Lin et al. (2009) performed a novel analysis of thread oscillations by combining simultaneous recordings of motions along the line-of-sight and in the plane of the sky, which provides with information about the orientation of the oscillatory velocity vector. From the measurements of swaying motions in the plane of the sky, several threads in this work presented travelling disturbances whose main features were characterised (period, phase velocity and oscillatory amplitude). Moreover, two of the previous threads also showed Doppler velocity oscillations with a period similar to that of the swaying motions, so that the threads had a displacement that was neither in the plane of the sky nor along the line of sight. By combining the observed oscillations in the two orthogonal directions, Lin et al. (2009) derived the full velocity vectors. They suggested that thread oscillations were probably polarised in a fixed plane that may attain various orientations relative to the local reference system (for example, horizontal, vertical or inclined). In the case of the two analysed threads, a combination of the observed velocity components yielded an orientation of the velocity vectors of 42\(^{\circ }\) and 59\(^{\circ }\) with respect to the plane of the sky. Once the heliocentric position of the filament was taken into account, these angles transformed into oscillatory motions which were reasonably close to the vertical direction. Lin et al. (2009) alerted that this conclusion is based on only two cases and that it is not possible to draw any general conclusion about the orientation of the planes of oscillation of filament threads. In fact, Yi and Engvold (1991) found no centre-to-limb variations of the velocity amplitude of threads displaying Doppler velocity oscillations, so they concluded that there did not seem to be a preferred direction of oscillatory motions in their data set.
The work of Mashnich et al. (2012) also gives some insight into the orientation of oscillatory motions. These authors used a combination of plane of the sky position and Doppler velocity to study small amplitude oscillations of two filaments (one of these two data sets had already been analysed by Mashnich et al. 2009b). The position of minimum intensity along the spectrograph slit was taken as a proxy for the filament position. Mashnich et al. (2012) found that the two filaments presented quasi-hourly oscillations (more precisely with 56 and 50 min periods) both in the plane of the sky and in the Doppler velocity. One can then deduce that in these events the velocity vector of the filament oscillations is well determined. Furthermore, Mashnich et al. (2012) noted that the amplitude of these quasi-hourly oscillations of the Doppler velocity can decrease by a factor 2–3 as the filament approaches the central meridian, which would favour the interpretation of these events as horizontal, transverse oscillations of the filaments. The thread oscillations of Lin et al. (2009) and the filament oscillations of Mashnich et al. (2012) would then have completely different polarisations.
5.8 Wave damping and oscillation lifetime
A visual inspection of the data sometimes reveals the existence of outstanding periodic variations and use of the FFT, or even better the periodogram (which yields an increased frequency resolution), is only necessary to derive a precise value of the period. In such cases it usually turns out that the oscillatory amplitude tends to decrease in time in such a way that the periodicity totally disappears after a few periods (e.g., Landman et al. 1977; Tsubaki and Takeuchi 1986; Wiehr et al. 1989; Molowny-Horas et al. 1999; Terradas et al. 2002; Lin 2005; Berger et al. 2008; Ning et al. 2009a, b), just as found in large amplitude oscillations. This is then interpreted as a sign of wave damping, although the specific mechanism has not been commonly agreed on (see Sect. 7 for a summary of theoretical results on this topic).
Oscillations of prominence threads also display fast attenuation. For example, Lin (2005) detected several periodicities over large areas of a filament, with maximum power at periods of 26, 42 and 78 min. Pronounced Doppler velocity oscillations with 26 min period could only be observed for 2–3 periods, after which they became strongly damped.
5.9 Wavelength, phase speed and group velocity
To derive the wavelength (\(\lambda \)) and phase speed (\(c_{{\mathrm {ph}}}\)) of oscillations, time signals at different locations on the prominence must be acquired. The signature of a propagating wave is a linear variation of the oscillatory phase with distance. Hence, when several neighbouring points are found to oscillate with the same frequency, one can compute the Fourier phase of the signal at each of the points and check whether it varies linearly with distance. If it does, this gives place to a wave propagation interpretation and the wavelength can be calculated. This approach has been followed by Thompson and Schmieder (1991), Molowny-Horas et al. (1997) (about which more details are given in Sect. 5.9.2) and Terradas et al. (2002) (see Sect. 5.9.3). On the other hand, Lin (2005) and Lin et al. (2007) (see Sect. 5.9.4) detected wave propagation along threads by studying Doppler velocity variations at fixed times. They observed a sinusoidal variation of the Doppler shift with distance along the thread, which allowed them to compute the wavelength. Moreover, the phase velocity of the oscillations can be derived from the inclination of the coherent features in the Doppler velocity time-slice diagrams. Other authors have followed less strict methods to calculate these wave parameters.
It must be mentioned that observations of wave propagation in slender waveguides or plane wave propagation in a uniform medium do not provide with the actual value of the wavelength (\(\lambda \)), but its projection on the plane of the sky, which is shorter than \(\lambda \). And if a slit or some points along a straight line are used, then the computed wavelength is the projection of \(\lambda \) on the slit or the line. The observationally measured period and wavelength can in turn be used to calculate the phase speed, but since the observational wavelength is a lower limit to \(\lambda \), this observational phase speed is also a lower limit to \(c_{{\mathrm {ph}}}\) (Oliver and Ballester 2002). Hence, even if it is not explicitly mentioned, the values of \(\lambda \) and \(c_{{\mathrm {ph}}}\) quoted here are observationally derived lower bounds to the actual values.
The results presented in this section are grouped in four parts, the first three of them in increasing order of complexity of the data analysis; the fourth one is devoted to thread oscillations. The reported wavelength values cover a range from less than 3000 km (for waves propagating along some threads) to 75,000 km (for waves propagating in a large area of a quiescent prominence). These numbers must be taken into account in the theoretical study of these events.
5.9.1 Simple analyses
Malville and Schindler (1981) observed a loop prominence some 90 min before the onset of a nearby flare and detected periodic changes with a wavelength along the loop of 37,000 km. This value, together with the period of 75 min, results in a phase speed of about 8 \({\mathrm {km\ s}}^{-1}\).
Subsequent reports, which we now describe, are based on sheet-like prominences. Thompson and Schmieder (1991) detected periodic variations with periods between 3.5 and 4.5 min in a filament thread. They then computed the Fourier phase of the points along the thread and, after confirming its linearity from a phase versus distance plot, the value \(\lambda \simeq 50{,}000\) km was derived, from which the phase speed is \(c_{{\mathrm {ph}}}\simeq 150-200\) \({\mathrm {km\ s}}^{-1}\). In other works (e.g., Tsubaki and Takeuchi 1986; Tsubaki et al. 1987, 1988; Suematsu et al. 1990) the signal in some consecutive locations along the slit has been found to be in phase. Although this seems to indicate that the wavelength of oscillations is much larger than the distance between the first and last of those points, this may not be necessarily true and a proper determination of the wavelength requires computing the Fourier phase corresponding to the oscillatory period.
Blanco et al. (1999) detected 15–20 min periodic variations corresponding to a pulse travelling with a speed of 170 \({\mathrm {km\ s}}^{-1}\). Such a large phase velocity is hard to reconcile with the typical speeds in a prominence, but it must be taken into account that this result has been obtained using Si iv and O iv lines, which are formed at transition region temperatures.
Berger et al. (2008) used high-resolution observations of limb prominences made by Hinode/SOT and detected oscillations that do not affect the whole prominence body. They considered three horizontal time slices at heights separated by 4.7 Mm and detected the presence of coherent oscillations in the three slices (Fig. 7). A phase matching of the sinusoidal profiles of these oscillations results in a vertical propagation speed (i.e., phase speed) around 10 \({\mathrm {km\ s}}^{-1}\). Again, this value comes from a projection on the plane of the sky and is therefore a lower bound of the actual value.
Schmieder et al. (2013) used Hinode/SOT Ca ii K data to observe a limb prominence. They detected vertically propagating waves in three vertical pillars contained in a large foot of the prominence. The vertical distance between Ca ii K intensity maxima gave values of the wavelength (projected on the plane of the sky) of 2000 km and 900 km for the waves propagating in the first two pillars. As for the period and projected phase speed, the values obtained in the three pillars were \(277\pm 50\) s, \(205\pm 54\) s, \(314\pm 125\) s and \(10\pm 4\) \({\mathrm {km\ s}}^{-1}\), \(5\pm 3\) \({\mathrm {km\ s}}^{-1}\), \(-\,5\pm 2\) \({\mathrm {km\ s}}^{-1}\), respectively, where the minus sign in the third phase velocity means downward propagation. Simultaneous spectropolarimetric measurements acquired with THEMIS allowed to determine the magnetic field vector, which in one of the pillars was nearly horizontal and mainly in the plane of the sky, and had a strength of 7.5 G. Hence, wave propagation is perpendicular to the local magnetic field. Ofman et al. (2015) subsequently performed a more detailed analysis of the same data set along the first pillar. Using a time–distance diagram, they found that the projected propagation speed takes typical values between \(5.9\pm 1.0\) and \(8.5\pm 1.2\) \({\mathrm {km\ s}}^{-1}\) (which can be compared to the value \(10\pm 4\) \({\mathrm {km\ s}}^{-1}\) derived by Schmieder et al. 2013). Furthermore, Ofman et al. (2015) determined the period of propagating disturbances at 6 separate heights along the pillar (ranging from 11.1 \(^{\prime \prime }\) to 15 \(^{\prime \prime }\)) and derived values between \(4.9\pm 0.5\) and \(11.3\pm 1.2\) min; these periods show a decreasing trend above 12.7 \(^{\prime \prime }\). These numbers must be compared with \(P=277\pm 50\) s \(=4.6\pm 0.8\) min obtained by Schmieder et al. (2013) after examining the time variation of the Ca ii K intensity on a single point of the pillar. Ofman et al. (2015) also noted that the intensity variations in this event are not small compared with the unperturbed value and that they increase with height. This, together with the presence of sharp fronts in the propagating waves, led these authors to conclude that non-linear effects are important in this wave phenomenon.
5.9.2 An elaborate one-dimensional analysis
To obtain the group velocity of this event, Molowny-Horas et al. (1997) performed a wavelet analysis of the same set of data, which revealed the presence of a train of 7.5-min waves in the slit locations (Fig. 18). Moreover, the time of occurrence of the train of waves increases linearly along the slit, which agrees with the assumption of a propagating disturbance. The velocity of propagation along the slit can then be computed and the value \(v_\Vert \simeq 4.4\) \({\mathrm {km\ s}}^{-1}\) is obtained. Taking into account that \(v_\Vert \) is the projection of the group velocity, \(v_{{\mathrm {g}}}\), on the slit, one concludes that the above value is a lower limit for the group velocity, so \(v_{{\mathrm {g}}}\ge 4.4\) \({\mathrm {km\ s}}^{-1}\).
5.9.3 A two-dimensional analysis
5.9.4 Thread oscillations
Yi et al. (1991) and Yi and Engvold (1991) used two-dimensional spectral scans and investigated the presence of periodic variations of the Doppler shift and central intensity of the He i 10,830 Å line in two filaments. Yi et al. (1991) performed a first examination of the data and found oscillations with well-defined periods along particular threads in each prominence. For this reason, Yi and Engvold (1991) plotted the Doppler velocity versus position for different times in a given thread, so that a periodic spatial structure would directly yield a measure of the wavelength. Instead of this pattern, an almost linear variation of the velocity along the thread was found and consequently a value of \(\lambda \) much larger than the length of the threads, some 20,000 km in the two cases considered, was reported. Given that the periods are between 9 and 22 min, the corresponding phase speed is \(c_{{\mathrm {ph}}}\gg 15\) \({\mathrm {km\ s}}^{-1}\). This result suggests that the thread is oscillating in the fundamental kink mode (whose wavelength is of the order of the length of the supporting magnetic tube, that is, around 100,000–200,000 km; see Sect. 6.3.1), rather than being disturbed by a travelling wave. Let us mention that, in general, this analysis may be misleading since the velocity signal does not generally consist of the detected periodic component only, but it is made of this component mixed with other velocity variations. If the periodic component is weak, then the method used by Yi and Engvold (1991) may fail because the signature of the propagating wave is masked by the rest of the signal.
A much more profound study was carried out by Lin et al. (2003) by examining the two-dimensional motions and Doppler shifts of 328 features (or absorbing “blobs”) of different threads. Forty nine of these features are observed to flow along the filament axis with speeds of 5–20 \({\mathrm {km\ s}}^{-1}\) while oscillating in the line-of-sight at the same time with periods of 4–20 min (see Fig. 28). To simplify the examination of oscillations, Lin (2005) computed average Doppler signals along each thread and found that groups of adjacent threads oscillate in phase with the same period. This has two consequences: first, since the periodicity is outstanding in the averaged signal for each thread, the wavelength of oscillations is larger than the length of the thread. Again, the interpretation of this result is that the threads oscillate in their fundamental kink mode. Second, in this data set threads have a tendency to vibrate collectively, in groups, rather than independently.
To test the coherence of oscillations over a larger area, covering several threads, Lin et al. (2007) averaged the line-of-sight velocity in a 3.4 \(^{\prime \prime }\) \(\times \) 10 \(^{\prime \prime }\) rectangle containing closely packed threads. The averaged Doppler signal (left panel of their Fig. 4) displays a very clear oscillation. In addition, the power spectrum of this signal has a significant power peak at 3.6 min. Thus, the conclusion is that neighbouring threads tended to oscillate coherently in this rectangular area, possibly because they were separated by very short distances. This signal averaging could be analogous to acquiring data with poor seeing, such as in Terradas et al. (2002) (see Sect. 5.9.3).
Ning et al. (2009b) analysed the oscillatory behaviour of 13 threads in a quiescent prominence observed with Hinode/SOT. They found that many prominence threads exhibited vertical and horizontal oscillatory motions and that the corresponding periods did not substantially differ for a given thread. In some parts of the prominence, the threads seemed to oscillate independently from one another, and the oscillations were strongly damped. Some of the oscillating threads presented a simultaneous drift in the plane of the sky with velocities from 1.0 to 9.2 \({\mathrm {km\ s}}^{-1}\). The reported periods were short (between 210 and 525 s), with the dominant one appearing at 5 min. Peak to peak amplitudes were in the range 720–1440 km and the phase velocity varied between 5.0 and 9.1 \({\mathrm {km\ s}}^{-1}\).
6 Theoretical aspects of small amplitude oscillations: periods and spatial distribution
The usual interpretation of small amplitude oscillations is that some external agent excites MHD waves in the form of periodic disturbances of the cold plasma. MHD waves can be propagating or standing. In the first case, there is a periodic disturbance of the particles of the prominence plasma that may propagate in the medium. In the second case, the wave is confined to a region with fixed boundaries, thus producing the positive interference of propagating waves. Theoretical models usually consider small amplitude perturbations superimposed on an equilibrium configuration. Then the properties of propagating/standing MHD waves are analysed. In the case of standing waves, we usually refer to the MHD eigenmodes of the system or to the modes for short.
Following our previous discussion of observations (Sect. 5.6), oscillations may affect individual threads, groups of threads or even larger areas of a prominence. The wave information (period, wavelength, phase speed, damping time) obtained from the analysis of this kind of events has been presented in Sects. 5.8 and 5.9. Given that the main purpose of studying prominence oscillations is to gain a more profound understanding of their nature via seismological studies, it is necessary to study these oscillations theoretically. The information one expects to derive from these works consists of the main wave properties (period, wavelength, phase speed, damping time, spatial distribution, ...). They can then be compared with the observationally determined values. The theory also allows us to determine the temporal variation of the perturbed magnetic field strength and its orientation, the perturbed density, temperature, etc., which means that these variables constitute another source of comparison with observations that will hopefully be exploited in the near future (see Sect. 6.6 for some preliminary attempts in this direction).
The structure of this section is as follows: we start reviewing the theoretical works that deal with the (linear) normal modes of extremely simple prominence models (Sect. 6.1) and of models in which the prominence is represented as a plasma condensation without internal (i.e., thread) structure and surrounded by the solar corona (Sect. 6.2). Next, we describe the (linear) normal modes of prominence threads of either infinite (Sect. 6.3) or finite (Sect. 6.4) length. Sect. 6.5 is devoted to studies in which wave propagation in a prominence is investigated by the numerical solution of the time–dependent MHD equations. Finally, Sect. 6.6 deals with the combination of MHD and radiative transfer calculations.
6.1 Linear oscillations of very simple prominence models
The aim of the works discussed in this section is to follow elementary arguments to derive approximations for the oscillatory period and the polarisation of plasma motions of the main modes of oscillation of a prominence. Some of the obtained results correspond to MHD modes studied in more detail in other works (see Sect. 6.2). One of these works (Joarder and Roberts 1992b) is concerned with a prominence treated as a plasma slab embedded in the solar corona and with a magnetic field perpendicular to the prominence main axis (Fig. 37). Waves are allowed to propagate along the slab. The coordinate system introduced by Joarder and Roberts (1992b) has the x-axis pointing across the prominence (i.e., parallel to the magnetic field), the z-axis in the direction of wave propagation and the y-axis along the prominence. Three MHD modes exist in this configuration: the fast, Alfvén and slow modes, with motions polarised in the z-, y- and x-directions, respectively. Some of the simple analogies discussed next allow us to derive approximations for the period of these modes.
6.1.1 Loaded string: gravity acting as restoring force
6.1.2 Loaded string
The reader must be warned that when using the speeds \(c_{{\mathrm {T}}}\) and \(c_{{\mathrm {f}}}\) for the slow and fast modes, respectively, one is assuming a structuring across the magnetic field that is absent in the models discussed in this section.
6.1.3 Loaded string: finite width prominence
To understand the standing solutions supported by the string of Fig. 33c, we now concentrate on their spatial distribution. Figure 34a, b display the two lowest frequency solutions of Eq. (17), while Figs. 34c and d show the two lowest frequency solutions of Eq. (18). Their frequencies are approximately given by Eq. (19), Eq. (20) with \(n=1\), Eq. (22) with \(n=0\) and Eq. (21) with \(n=1\), respectively. Let us refer to the parts of the string with density \(\rho _{{\mathrm {c}}}\) and \(\rho _{{\mathrm {p}}}\) as the external and internal regions. The eigenfunction in Fig. 34d differs from the other three in that the displacement in the external region is an order of magnitude larger than in the internal region. For this reason it is termed an external mode, since its properties are dominated by the nature of the external part of the string (Joarder and Roberts 1992b). One then is tempted to call the other three solutions in Fig. 34 internal modes, but a simple experiment will prove this to be wrong (Oliver et al. 1993). Let us gradually reduce the size of the internal part of the string (by reducing \(x_{{\mathrm {p}}}\)). Then internal mode frequencies (cf. Eqs. 20 and 22) tend to infinity and in the limit \(x_{{\mathrm {p}}}\rightarrow 0\) internal modes disappear and only external modes remain. It turns out that this process of gradually removing the density enhancement in the central part of the string does not eliminate the mode of Fig. 34a, which is transformed into the fundamental mode of the string. Thus, this is not an internal mode. By a similar process (i.e., by letting \(x_{{\mathrm {p}}}\rightarrow L\)), the central part of the string can be progressively expanded so that we end up with a uniform density \(\rho _{{\mathrm {p}}}\). This makes external mode frequencies grow unbounded (cf. Eq. 21) and for \(x_{{\mathrm {p}}}\rightarrow L\) only internal modes remain. In this process the mode of Fig. 34a transforms into the fundamental mode of the string. Hence, this mode is not an external mode, either, and it owes its existence to the concurrent presence of both the internal and external parts of the string. For this reason Oliver et al. (1993) labelled this solution a hybrid mode. The hybrid mode frequency is approximately given by Eq. (19), the internal mode frequencies by Eqs. (20) and (22) and the external mode frequencies by Eq. (21).
6.1.4 Loaded string: order of magnitude calculations using the Kippenhahn–Schlüter model
Anzer (2009) performed some simple estimates of the main oscillatory periods of a prominence using the Kippenhahn–Schlüter model (Kippenhahn and Schlüter 1957) modified so as to include the corona in which the prominence is embedded (for a general solution see Poland and Anzer 1971). In this configuration, see Fig. 35, a curved magnetic field gives support of the cold plasma against gravity. Field lines outside the prominence do not bend downwards and so the magnetic field in the coronal environment does not present the desired arcade shape. For this reason, the role of the dense photosphere is played by two vertical rigid walls. Note that the configuration used by Anzer (2009) bears some resemblance to that of Fig. 33a: the coronal magnetic field is almost uniform and makes an angle \(\theta \) with the horizontal direction. Hence, \(\tan \theta =B_{z1}/B_x\), with \(B_{z1}\) the vertical magnetic field component at the prominence boundary and \(B_x\) the uniform horizontal field component. A further similarity between the present model and the previous ones is that the density is analogous to that of Fig. 33c.
Anzer (2009) noted that the field line inclination is expected to be very small and therefore \(B_{z1}/B_x\ll 1\). As a consequence, the period of x-oscillations will be much larger than that of the other two modes, polarised in the y- and z-directions.
Four oscillatory modes can be identified from these elementary considerations, but the restoring forces in the x-direction act in unison to create a single mode, so we are left with the familiar three MHD modes: fast, Alfvén and slow.
Some values of the periods given by Anzer (2009) are similar to those in previous works: 200 min for the magnetically dominated oscillations in the x-direction, 430 min for the gas pressure driven oscillations and 20 min for the transverse, magnetically driven oscillations.
6.1.5 Loaded string: skewed magnetic field
A further refinement of the string analogy (Joarder and Roberts 1992b; Roberts and Joarder 1994) can be introduced by noting that the magnetic field of a prominence is not at \(90^\circ \) with the prominence axis, contrary to the simple models of Figs. 33 and 35. Instead, the prominence magnetic field makes an angle \(\phi \), typically around \(20^\circ \), with the long axis of the slab. This is not too important for the almost isotropic fast modes, but Alfvén and slow modes propagate mainly along field lines, which in a skewed magnetic configuration are longer than 2L by a factor \(1/\sin \phi \approx 3\). Thus, the periods of these waves become larger by this same factor since the travel time needed for them to travel back and forth between the anchor points increases by \(1/\sin \phi \). The result is that the hybrid Alfvén and slow modes can have periods up to 60 min and 5 h, respectively. It has been suggested that the last one may be the cause of the very long-period oscillations observed by Foullon et al. (2004) and Pouget et al. (2006).
6.2 Linear oscillations of prominence models with no internal structure
6.2.1 Slab with longitudinal magnetic field
6.2.2 Slab with transverse magnetic field
Oliver et al. (1993) presented more insight into the nature of internal and external modes while using the non-isothermal Kippenhahn–Schlüter solution represented in Fig. 35. These authors followed the evolution of fast and slow modes in the dispersion diagram when the prominence is slowly removed by taking \(x_{{\mathrm {p}}}\rightarrow 0\). They noted that the frequencies of internal modes, both slow and fast, progressively grow until they exceed the highest \(\omega \) value of the dispersion diagram and so these modes are no longer present in this plot; therefore, only external modes remain in the dispersion diagram. The presence of the prominence region thus gives physical support for the existence of internal modes. The same is true for external modes when the corona is gradually removed by making \(x_{{\mathrm {p}}}\rightarrow L\). A clear distinction then arises between the two types of modes, although it turns out that the fundamental mode is internal and external at the same time, since it survives both when the prominence and the corona are eliminated. For this reason, this mode with mixed internal and external properties was called hybrid by Oliver et al. (1993) and later string by Joarder and Roberts (1993b) because it arises in the string analogy. Nevertheless, internal and external modes are also present in the string analogy (Sect. 6.1), so perhaps hybrid mode is a better denomination for this solution.
From Oliver et al. (1993) it also appears that the amplitude of perturbations in the prominence is rather small for external modes, a feature that is also present in the string solutions of Fig. 34. For this reason it was postulated that they would probably be difficult to detect in solar prominences and that the reported periodic variations are produced by the hybrid and internal modes. In addition, the frequency of internal modes is shown to depend on prominence properties only, while that of hybrid and external modes depends on other physical variables such as the length of field lines. This is in agreement with the approximate Eqs. (19)–(22).
The essential difference between the equilibrium models in Joarder and Roberts (1992b) and in Oliver et al. (1993) is that gravity is neglected in the former, which results in straight magnetic field lines, while it is a basic ingredient in the later, which results in the curved shape of field lines characteristic of the Kippenhahn–Schlüter equilibrium model. Despite the different shape of field lines, the main features of the oscillatory spectrum are similar and so the influence of gravity and field line shape on the properties of the MHD modes is not too relevant in this kind of configurations.
6.2.3 Slab with skewed magnetic field
6.2.4 Slab models with prominence–corona transition region
The previous results rely on models in which the prominence and coronal temperatures are uniform, with a sharp jump of this physical variable from the cool to the hot region at an infinitely thin interface. A smoothed temperature transition between the two domains, representing the prominence–corona transition region (PCTR), was used by Oliver and Ballester (1996) to investigate the MHD modes of a more realistic configuration. Despite the presence of the PCTR in the equilibrium model, internal, external and hybrid modes are still supported, just like in configurations with two uniform temperature regions. Nevertheless, the PCTR results in a slight frequency shift and in the modification of the spatial velocity distribution so as to decrease the oscillatory amplitude of internal modes inside the prominence. Hybrid modes are not so much affected by the presence of the PCTR because their characteristic wavelength is much longer than the width of the PCTR. Then, the conclusion is that the PCTR may influence the detectability of periodic prominence perturbations arising from internal modes.
6.2.5 Stability of two-dimensional prominence models
Galindo Trejo (1987) considered four prominence models, namely those by Kippenhahn and Schlüter (1957), Dungey (1953), Menzel (1951) and Lerche and Low (1980). All these models are isothermal, i.e., they do not incorporate the corona around the prominence plasma. This implies that the important hybrid modes are absent in the analysis. In spite of this, some interesting results were obtained by Galindo Trejo (1987). Here we only mention the most relevant ones. For example, the fundamental mode of the Kippenhahn–Schlüter configuration, whose period is 16 min, has motions polarised mainly across the prominence slab, so it can be associated with the internal slow mode. On the other hand, the fundamental mode of Dungey’s model has horizontal motions mostly along the prominence axis (such as corresponds to Alfvén waves) which are more important at the top of the prominence than at the bottom. The oscillatory period ranges from 55 to 80 min. In the case of Menzel’s model, the lowest frequency eigenmode has a period of 40 min and motions whose amplitude increases with height and oriented across the prominence. The eigenmode of Lerche and Low’s solution presents a greater range of periods (17–50 min) and, once more, with horizontal plasma displacements transverse to the prominence axis. Two improvements of this elaborated work can be done: the inclusion of the coronal plasma and the consideration of the oscillatory properties of other modes.
In two subsequent papers the stability of the prominence model of Low (1981) was investigated. In the first one (Galindo Trejo 1989b) a uniform magnetic field component along the prominence axis was used, whereas in the second one (Galindo Trejo 1989a) this quantity is not uniform. The author concluded that, as long as this magnetic field component is weak, these different choices of the magnetic configuration do not influence much the period of the fundamental mode, which is in the range 3–7 min. The spatial distribution of motions is similar to that found by Galindo Trejo (1987) for Menzel’s and Lerche and Low’s equilibrium models.
The following paper of this series (Galindo Trejo 1998) is concerned with the prominence model of Osherovich (1985), which is characterised by a surrounding horizontal magnetic field connected with the prominence field. Different values of the equilibrium parameters were used and as a result the fundamental mode has periods that range from 4 to 84 min. Galindo Trejo (1998) found that for small values of the longitudinal magnetic field component large velocity amplitudes predominate in the upper part of the prominence, while the opposite happens for a stronger longitudinal component. The magnetic field shear is also relevant: for a moderate (and hence non-uniform) shear, the fundamental eigenmode is in the intermediate-period range and for a uniform shear long periods are obtained.
Galindo Trejo (2006) investigated the equilibrium solution of Osherovich (1989), that is characterised by an external vertical magnetic field that allows the prominence to be placed on the boundary between two regions of opposite photospheric magnetic polarity. A wide range of periods was obtained in this work (9–73 min). Also, horizontal oscillatory motions either along the prominence or almost across it were found. Therefore, it seems that in most configurations studied by Galindo Trejo the fundamental oscillatory mode is a slow mode.
6.3 Fine structure oscillations (propagating waves)
Prominence models considered in Sects. 6.1, 6.2 and 4.4 are very simplified representations of solar prominences. They provide us with information about a prominence global oscillatory behaviour, but high resolution observations (see Sects. 5.6 and 5.9.4) have given us detailed information about the local oscillatory behaviour of the fine, internal structure of filaments. This has prompted the study of thread oscillations. From the existing observational evidence, two situations can be considered: waves propagating along a thread (treated in this section) and standing modes, presumably with a wavelength of the order of the length of the supporting magnetic tube and thus much larger than the thread length (these works are presented in Sect. 6.4.) Other important ingredients uncovered by observations (Sects. 5.6 and 5.9.4) are the collective behaviour and the presence of flows in some oscillating threads. These features have been incorporated into some investigations and will be also discussed here.
6.3.1 Individual thread oscillations
This formula for P is based on the assumption that the wavelength is much larger than the thread radius (this approximation is also know as the thin tube limit). Propagating waves in threads have been detected by, e.g., Lin et al. (2007) (see Sect. 5.9.4 and Fig. 32). The reported wavelength is 3.8 \(^{\prime \prime }\) and the radius of threads is typically between 0.1 and 0.15 \(^{\prime \prime }\), which proves that the assumption made to derive Eq. (31) is satisfied in this event.
6.3.2 Collective thread oscillations
Soler et al. (2009c) extracted another conclusion from Eqs. (34) and (35): the difference between the Alfvén (sound) speed of the threads determines the difference of the flow speeds for the existence of collective behaviour of kink (slow) modes. Therefore, when flows are present in the equilibrium, collective motions can be found even in systems of non-identical threads for very specific combinations of the two flow velocities. These velocities are within the observed values in prominences if threads with not too different temperatures and densities are considered. However, since the flow velocities required for collective oscillations must take very particular values, such a special situation may rarely occur in prominences. This conclusion has important repercussions for future prominence seismological applications, given that if collective oscillations are observed in large areas of a prominence, threads in such regions should possess very particular combinations of temperatures, densities, magnetic field strengths and flows.
6.4 Fine structure oscillations (standing waves)
Filament threads have been modelled as magnetic flux tubes anchored in the solar photosphere which are stacked one on top of one another in the vertical and horizontal directions, giving place to the filament body. In the models presented in this section a thread is envisaged as a cold, dense condensation that fills the central part of a magnetic tube containing hot coronal plasma and anchored in the solar photosphere. Although this structure has been modelled with some complexity (Ballester and Priest 1989; Rempel et al. 1999), only oscillations of much simpler thread configurations have been investigated so far. Because the reported thread oscillations are transverse, we here concentrate on works that investigate this kind of motions.
6.4.1 Cartesian geometry
6.4.2 Cartesian geometry: collective thread oscillations
Díaz and Roberts (2006) studied the properties of the fast MHD modes of a periodic, Cartesian thread model (see Fig. 1 of Díaz and Roberts 2006). This configuration represents a bridge between a structure with a limited number of threads (studied by Díaz et al. 2005, see Fig. 53) and a homogeneous prominence with a transverse magnetic field (investigated by Joarder and Roberts 1992b, see Fig. 37). Díaz and Roberts (2006) found that for thread separations of the order of their thickness the only confined modes are those in which large numbers of threads are constrained to oscillate nearly in phase. The spatial structure of these solutions is similar to that of the propagating modes of a homogeneous prominence, with small-scale deviations due to the presence of the dense threads. Their period is equal to \(\sqrt{f}P\), with P the period of the prominence slab and f the filling factor. The system with a limited number of threads has an even shorter period and a comparison between the different configurations considered by Díaz and Roberts (2006) gives periods of 23.6 min for the homogeneous prominence, between 12.1 and 19.3 min for the system of periodic threads and 5.3 for the four-thread configuration studied by Díaz et al. (2005). Hence, the main conclusion of Díaz and Roberts (2006) is that prominence fine structure plays an important role and cannot be neglected.
6.4.3 Cylindrical thread
To study the oscillations of the above mentioned configurations, Díaz et al. (2001, 2002) developed a very general, although cumbersome procedure. However, Dymova and Ruderman (2005) considered the same problem and to simplify its study took advantage of the fact that the observed thickness of oscillating threads is orders of magnitude shorter than their length. Taking this into account, Dymova and Ruderman (2005) used the so-called thin flux tube (TT) approximation, that enables a simpler solution for the MHD oscillations of longitudinally inhomogeneous magnetic tubes. Once the partial differential equation for the total pressure perturbation is obtained, a different scaling (stretching of radial and longitudinal coordinates) of this equation inside the tube and in the corona can be performed. Following this procedure, two different equations for the total pressure perturbation inside and outside the flux tube, with well known solutions, are obtained. After imposing boundary conditions, the analytical dispersion relations for even and odd modes were derived and a parametric study was performed. A comparison between the numerical values of the periods obtained with this approach and that of Díaz et al. (2002) points out differences of the order of 1%. The only drawback of the method of Dymova and Ruderman (2005) is that it can be only applied to the fundamental mode with respect to the radial dependence.
6.4.4 Flowing cylindrical thread
Terradas et al. (2008) modelled the transverse oscillations of flowing prominence threads observed by Okamoto et al. (2007) with Hinode/SOT (Sect. 5.9.4). The kink oscillations of a flux tube containing a flowing dense part, which represents the prominence material, were studied from both the analytical and the numerical point of view. In the analytical case, the Dymova and Ruderman (2005) approach with the inclusion of flow was used, while in the numerical calculations the linear ideal MHD equations were solved. The results point out that for the observed flow speeds there is almost no difference between the oscillation periods when static versus flowing threads are considered, and that the oscillatory period matches that of a kink mode. In addition, to obtain information about the Alfvén speed in oscillating threads, a seismological analysis as described in Sect. 8.6 was also performed.
Also motivated by the observations by Okamoto et al. (2007), Soler and Goossens (2011) have further studied the properties of kink MHD waves propagating in flowing threads. In good agreement with Terradas et al. (2008), the period is seen to be slightly affected by mass flows. When the thread is located near the centre of the supporting magnetic tube, and for realistic flow velocities, the effect of the flow on the period is estimated to fall within the error bars from observations. On the other hand, as the thread approaches the footpoint of the magnetic structure, flows introduce differences up to 50% in comparison to the static case. The variation of the amplitude of kink waves due to the flow is additionally analysed by Soler and Goossens (2011). It is found that the flow leads to apparent damping or amplification of the oscillations. During the motion of the prominence thread along the magnetic structure, the amplitude grows as the thread gets closer to the centre of the tube and decreases otherwise. This effect might be important, since it would modify the actual observed attenuation, if any physical damping mechanism is present.
6.4.5 Some remarks about Cartesian and cylindrical thread models
Theoretical models described in this section have considered prominence plasmas as either slabs or cylindrical magnetic flux tubes. Slab models were intended to study the global oscillation properties of prominences, while flux tube models seem to be more appropriate for their application to the fine structure of prominences. Nevertheless, the properties of modes of oscillation like the kink mode have often been first studied in Cartesian geometry and then in cylindrical configurations, because the mathematical treatment is simpler in the first geometry. It is worth emphasising that the deformation of a slab or a cylinder boundary looks similar when perturbed by a kink mode: at any time it has a sinusoidal shape, the same of the slab or cylinder axis, with opposite boundary points with respect to the axis having an anti-symmetric displacement. On the other hand, the sausage mode gives rise to a symmetric perturbation of the boundary with respect to its axis, which remains undisturbed. A few differences that arise between Cartesian and cylindrical geometries are relevant when comparing the theoretical results to observations.
The theoretical frequencies for the kink mode in Cartesian geometry are above the value obtained for a cylindrical equivalent with the same physical properties. This has been shown by Arregui et al. (2007), in the context of coronal loop oscillations. By assuming that a kink mode in a cylinder can be modelled in Cartesian geometry by adding a large perpendicular wave number, these authors show that in that limit the cylindrical kink mode frequency is recovered. A similar analogy was used by Hollweg and Yang (1988) who derived an expression for the damping time of a surface wave in Cartesian geometry and applied their result to coronal loops in the limit of large perpendicular wave number.
The spatial distribution of the eigenfunctions also differs when one compares, e.g., the kink mode properties in Cartesian and cylindrical geometry. The drop-off rate of the transverse velocity component is faster in cylindrical flux tubes than in slabs. A cylinder is a much better wave guide. For this reason, an oscillating cylindrical thread is less likely to induce oscillations in its neighbouring threads than a Cartesian thread.
6.5 Numerical magnetohydrodynamic models
The bulk of works in Sects. 6.1, 6.2, 6.3 and 6.4 have several limitations, the most remarkable being the linear approximation assumed (which is valid as long as the velocity amplitude is small) and the simplicity of the equilibrium models (which facilitates the computation of solutions to the MHD equations). Here we summarise works in which the temporal evolution of a prominence model is derived by solving the time–dependent (linear or non-linear) MHD equations. Note that small amplitude oscillations with maximum velocities of the order of the prominence sound speed (\(\simeq 10\) \({\mathrm {km\ s}}^{-1}\)) have been detected in a few works, e.g., Li and Zhang (2013) and Hillier et al. (2013); see Sect. 5.5. Non-linear effects may be important here.
6.5.1 Impulsive excitation
Terradas et al. (2013) constructed two-dimensional prominence equilibria by loading a coronal arcade by a continuous mass injection. After this process was finished the system was allowed to settle down into an equilibrium that was then perturbed by imposing either a vertical or a horizontal disturbance of the prominence. The time–dependent, linear, ideal MHD equations were solved numerically to study the resulting prominence oscillations.
Vertical oscillations, that are associated with fast MHD waves, are stable for all parameter values considered by Terradas et al. (2013). Their periods were computed for six configurations (corresponding to the combinations of three chosen values of prominence mass and two chosen values of magnetic field strength) and lie in the range 4–10 min. Figure 58 (left) displays the dependence of the period of vertical oscillations with respect to the length of the field line passing through the prominence centre (\(L_{\mathrm{fl}}\)). One can appreciate that the period only shows some dependence on \(L_{\mathrm{fl}}\) in the range of small values of this parameter. Furthermore, by comparing each thin line with its thick counterpart one can see that a change of a factor of 2 in the Alfvén speed lowers the periods by the same factor, which hints at a linear relation between the Alfvén speed and the frequency. Finally, the period also becomes larger when the prominence mass is increased.
6.5.2 Continuous, periodic excitation
Schmieder et al. (2013) and Ofman et al. (2015) studied vertically propagating waves in a prominence foot (see Sect. 5.9.1) and, in addition, conducted numerical MHD simulations to explain them in terms of propagating fast MHD waves. The main difference between these simulations is that, while Schmieder et al. (2013) restrict themselves to linear perturbations, Ofman et al. (2015) solve the non-linear problem. Both works use the prominence equilibrium represented in Fig. 37, except that the temperature and density in Ofman et al. (2015) have a continuous variation at the interface between the prominence and coronal plasma. The equilibrium is subject to a periodic forcing of the vertical velocity component at the prominence foot. Planar wave fronts resembling the observed ones propagate in the vertical direction, which supports the interpretation of this event as propagating fast MHD waves. Furthermore, Ofman et al. (2015) find a qualitative agreement between the sharp wave fronts in their numerical simulations and the non-sinusoidal shape of the observed waves at various heights in the prominence. This is taken as evidence for the importance of non-linearity in the propagation of these fast MHD waves.
6.6 Radiative magnetohydrodynamic models
Observations in which various spectral indicators are used simultaneously to investigate prominence oscillations are discussed in Sect. 5.2. The interpretation of results is difficult for two reasons: first, oscillations are usually not detected in all available spectral indicators, and second, the outcomes of theory and observations are not directly comparable: whereas the theoretical models can give the temporal behaviour of the plasma velocity, density, pressure and other physical parameters, observations yield information on quantities such as the line intensity, the line width or the Doppler shift. Only this last quantity can be the subject of direct comparison with theoretical results, so that a clear identification of the spectral parameters with physical variables (density, pressure, temperature, magnetic field strength) is required before further progress can be achieved. Then, the presence of a certain period in more than one spectral indicator could be used to infer the properties of the MHD wave involved. Another useful source of information could be the detection of a given period in one indicator but not in the others, such as reported in some works discussed in Sect. 5.2.
The work by Zapiór et al. (2016) makes use of the full prominence + corona equilibrium of Fig. 59. These authors followed the same procedure of Heinzel et al. (2014): fast and slow wave perturbations were obtained and synthetic spectral profiles were computed for each of them at different times. The magnetoacoustic waves that propagate in this slab structure were analysed by Joarder and Roberts (1992b) and have been discussed in Sect. 6.2.2. The relevant magnetoacoustic solutions for prominence oscillations are the hybrid and internal ones, and for this reason Zapiór et al. (2016) analysed the hybrid slow and fast waves (denoted as hS and hF, respectively) and their first internal overtones (1iS and 1iF, respectively). The total density, line-of-sight (LOS) velocity and total temperature associated to these modes are shown in Fig. 60 at different phases during a complete oscillatory period. Slow modes have a dominant horizontal polarisation and thus present the largest LOS velocities. The hS mode causes lateral motions of the full prominence with little compression and temperature variations, the hF and 1iS modes give rise to internal compression of the plasma (especially the later) and the 1iF mode is characterised by vertical shearing motions and small internal compression. Figure 61 shows the results for the \(\text {H}_\alpha \) and \(\text {H}_\beta \) lines and different phases during a complete period. These line profiles were then used to extract several spectral line parameters and to plot their time variation: see Fig. 62. It is obvious that different wave modes affect these spectral indicators in different ways, which strongly supports the seismological capabilities of this kind of studies. For example, the hS mode is the only one that produces Doppler velocity variations of the \(\text {H}_\beta \) line, whereas only the hF and 1iS modes cause variations of the \(\text {H}_\beta \) FWHM and intensity. The 1iF mode, on the other hand, has very little influence on these spectral parameters, its largest effect being \(\sim 1\%\) amplitude variations of the \(\text {H}_\beta \) line intensity. Furthermore, most parameters in Fig. 62 display a non-sinusoidal time profile.
Possibility of detecting the hS, 1iS, hF and 1iF wave modes using the Doppler velocity (\(v_{\mathrm {D}}\)), FWHM and line intensity (\(I_{\max }\)) of the \(\text {H}_\alpha \) and \(\text {H}_\beta \) spectral lines
Mode | \(v_{\mathrm {D}}\) | FWHM \(\text {H}_\alpha \) | \(I_{\max }\) | \(v_{\mathrm {D}}\) | FWHM \(\text {H}_\beta \) | \(I_{\max }\) |
---|---|---|---|---|---|---|
hS | 1 | 0 | 0 | 1 | 0 | 0 |
1iS | 1 | 1 | 1 | 0 | 1 | 1 |
hF | 0 | 1 | 1 | 0 | 1 | 1 |
1iF | 0 | 0 | 0 | 0 | 0 | 0 |
7 Theoretical aspects of small amplitude oscillations: damping mechanisms
Temporal and spatial damping is a recurrently observed characteristic of prominence oscillations (see Sect. 5.8). Several theoretical mechanisms have been proposed in order to explain the observed damping. Direct dissipation mechanisms seem to be inefficient, as shown by Ballai (2003), who estimated, through order of magnitude calculations, that several isotropic and anisotropic dissipative mechanisms, such as viscosity, magnetic diffusivity, radiative losses and thermal conduction cannot in general explain the observed wave damping. The time and spatial damping of linear non-adiabatic MHD waves has been considered by Carbonell et al. (2004, 2009), Terradas et al. (2001, 2005), Carbonell et al. (2006) and Soler et al. (2007, 2008). The overall conclusion from these studies is that thermal mechanisms can only account for the damping of slow waves in an efficient manner, while fast waves remain almost undamped. Since prominences can be considered as partially ionised plasmas, a possible mechanism to damp fast and Alfvén waves could be ion-neutral collisions (Forteza et al. 2007, 2008), although the ratio of the damping time to the period does not completely match the observations. Besides non-ideal mechanisms, another possibility to attenuate fast waves in thin filament threads comes from resonant wave damping (see, e.g., Goossens et al. 2010), which needs the presence of a smooth variation of the Alfvén speed across the field. This phenomenon is well studied for transverse kink waves in coronal loops (Goossens et al. 2006; Goossens 2008) and provides with a plausible explanation for quickly damped transverse loop oscillations first observed by TRACE (Aschwanden et al. 1999; Nakariakov et al. 1999).
The time scales of damping produced by these different mechanisms should be compared with those obtained from observations, that indicate that the ratio of the damping time to the period, \(\tau _{{\mathrm {d}}}/P\), is of the order of 1–4. The theoretical approach of many works about the damping of prominence oscillations has been to first study a given damping mechanism in a uniform and unbounded medium and thereafter to introduce structuring and non-uniformity. This has led to an increasing complexity of theoretical models in such a way that some of them now combine different damping mechanisms. Detailed reports on theoretical studies of small amplitude oscillations in prominences and their damping can be found in Oliver (2009), Ballester (2010) and Arregui and Ballester (2011). Here, we collect the most significant aspects of the theoretical mechanisms that have been proposed to explain the observed time-scales.
7.1 Damping of oscillations by thermal mechanisms
In a seminal paper, Field (1965) studied the thermal instability of a dilute gas in mechanical and thermal equilibrium. Using this approach, the time damping of magnetohydrodynamic waves in bounded Kippenhahn–Schlüter and Menzel prominence models was studied by Terradas et al. (2001). Similar studies using prominence slabs embedded in the solar corona were undertaken by Soler et al. (2007) and Soler et al. (2009a).
7.1.1 Non-adiabatic magnetoacoustic waves in prominence slabs
Terradas et al. (2001) studied the radiative damping of quiescent prominence oscillations. They adopted a relatively simple non-adiabatic damping mechanism, by including a radiative loss term based on Newton’s law of cooling with constant relaxation time. The influence of this type of radiative dissipation on the normal modes of Kippenhahn–Schlüter and Menzel quiescent prominence models was analysed. The normal modes of these configurations had previously been investigated by Oliver et al. (1992) and Joarder and Roberts (1993a); cf. Sect. 6.2. In a Kippenhahn–Schlüter prominence model, the fundamental slow mode is unaffected by radiation, but its overtones are strongly damped. On the other hand, in a Menzel prominence configuration all slow modes are characterised by short damping times. The damping time depends on the curvature of field lines, in such a way that more curved models produce larger damping times. In both prominence models, fast modes are practically unaffected by radiative losses and have very long damping times.
A more involved analysis was performed by Soler et al. (2007) by including thermal conduction, optically thin or thick radiation and heating in the energy equation. The prominence was modelled as a plasma slab embedded in an unbounded corona and with a magnetic field oriented along the direction parallel to the slab axis (see Fig. 36); this is the equilibrium configuration of Joarder and Roberts (1992a), whose normal modes have been discussed in Sect. 6.2. Soler et al. (2007) found that radiation losses have a different effect on magnetoacoustic waves depending on their wavenumber. For typical values of observed wavelengths, the internal slow mode is attenuated by radiation from the prominence plasma, the fast mode by the combination of prominence radiation and coronal conduction and the external slow mode by coronal conduction. This study highlights the relevance of the coronal physical properties on the damping properties of fast and external slow modes, whereas this aspect does not affect the internal slow modes at all. For thin slabs, representing a fine thread, Soler et al. (2007) found that the fast mode is less attenuated, whereas both internal and external slow modes are not affected by non-adiabatic damping mechanisms.
Damping of magnetoacoustic waves in slab prominence models with a transverse magnetic field (see Fig. 37 and Sect. 6.2 for a description of the normal modes) were studied by Soler et al. (2009a). The most relevant damping processes are coronal thermal conduction and radiative losses from the prominence plasma. In terms of the spatial distribution of the studied normal modes, it was found that both mechanisms govern together the attenuation of hybrid modes, whereas prominence radiation is responsible for the damping of internal modes and coronal conduction essentially dominates the attenuation of external modes. In terms of the different magnetohydrodynamic wave types, slow modes were found to be efficiently damped, with damping times compatible with observations. On the contrary, fast modes are less attenuated by non-adiabatic effects and their damping times are several orders of magnitude larger than those observed. The inclusion of the coronal medium in the analysis causes a decrease of the damping times compared to those of an isolated prominence slab, but this effect is still insufficient to obtain fast mode damping times compatible with observations.
7.1.2 Non-adiabatic magnetoacoustic waves in a single thread with mass flows
Soler et al. (2008) investigated the effects of both mass flow and non-adiabatic processes on the oscillations of an individual prominence thread modelled as an infinite homogeneous cylinder (Fig. 44). Thermal conduction and radiative losses were taken into account as damping mechanisms. For a discussion of the oscillatory features of this system, see Sect. 6.3.1.
The analysis of the damping time-scales for the different wave types shows that slow and thermal modes are efficiently attenuated by non-adiabatic mechanisms. On the contrary, fast kink modes are much less affected and their damping times are much larger than those observed. These results are compatible with the known damping properties of these waves in the absence of flows.
Although the presence of steady mass flows improves the efficiency of non-adiabatic mechanisms on the attenuation of transverse kink oscillations for propagation parallel to the flow, its effect is still not enough to obtain damping times compatible with observations.
7.1.3 Non-adiabatic magnetoacoustic waves in a two-thread system with mass flows
As concluded in Sect. 7.1.2, slow wave damping can be explained by thermal mechanisms. The right panel of Fig. 64 shows the damping ratios of the \(S_z\) and \(A_z\) solutions versus the distance between the two threads. Slow modes in a threaded prominence are efficiently attenuated by non-adiabatic mechanisms. Note that \(\tau _{{\mathrm {d}}}/P\) is almost independent of the thread separation and the mode because the two threads oscillate independently in the \(S_z\) and \(A_z\) modes. Time-scales \(\tau _{{\mathrm {d}}}/ P \approx 5\) are obtained, which is in agreement with previous studies (Soler et al. 2007, 2008) and consistent with observations.
Soler et al. (2009c) concluded that collective slow modes are efficiently damped by thermal mechanisms, with damping ratios similar to those reported in observations, while collective fast waves are poorly damped. This is a key point since efficiently damped transverse oscillations have been observed, which could suggest that other attenuation mechanisms could be at work.
7.2 Damping of oscillations by ion-neutral collisions
Since the temperature of prominences is typically of the order of 10\(^4\) K, the prominence plasma is only partially ionised. The exact ionisation degree of prominences is unknown and the reported ratio of electron density to neutral hydrogen density (see, e.g., Patsourakos and Vial 2002) covers about two orders of magnitude (0.1–10). Partial ionisation brings the presence of neutrals in addition to electrons and ions, thus collisions between the different species are possible. Because of the occurrence of collisions between electrons with neutral atoms and ions, and more importantly between ions and neutrals, Joule dissipation is enhanced when compared with the fully ionised case. A partially ionised plasma can be represented as a single-fluid in the strong coupling approximation, which is valid when the ion density in the plasma is low and the collision time between neutrals and ions is short compared with other time-scales of the problem. Using this approximation it is possible to describe the very low frequency and large-scale fluid-like behaviour of plasmas (Goossens 2003).
7.2.1 Homogeneous and unbounded prominence medium
Several studies have considered the damping of MHD waves in partially ionised plasmas of the solar atmosphere (Pontieu et al. 2001; James et al. 2003; Khodachenko et al. 2004; Leake et al. 2005). In the context of solar prominences, Forteza et al. (2007) derived the full set of MHD equations for a partially ionised, one-fluid hydrogen plasma and applied them to the study of the time damping of linear, adiabatic fast and slow magnetoacoustic waves in an unbounded prominence medium. This study was later extended to the non-adiabatic case by including thermal conduction by neutrals and electrons and radiative losses (Forteza et al. 2008). The main effects of partial ionisation on the properties of MHD waves manifest through a generalised Ohm’s law, which adds some extra terms in the resistive magnetic induction equation, in comparison to the fully ionised case. Forteza et al. (2007) considered a uniform and unbounded prominence plasma and found that ion-neutral collisions are more important for fast waves, for which the ratio of the damping time to the period is in the range 1 to \(10^5\), than for slow waves, for which values between \(10^4\) and \(10^8\) are obtained. Fast waves are efficiently damped for moderate values of the ionisation fraction, while in a nearly fully ionised plasma, the small amount of neutrals is insufficient to damp the perturbations.
A hydrogen plasma was considered in the above studies, but 90% of the prominence chemical composition is hydrogen and the remaining 10% is helium. The effect of including helium in the model of Forteza et al. (2008) was assessed by Soler et al. (2010b). The species present in the medium are electrons, protons, neutral hydrogen, neutral helium (He I) and singly ionised helium (He II), while the presence of He III is neglected (Gouttebroze and Labrosse 2009).
The thermal mode is a purely damped, non-propagating disturbance (\(\omega _{{\mathrm {R}}}= 0\)), so only the damping time, \(\tau _{{\mathrm {d}}}\), is plotted (Fig. 65d). We observe that the effect of helium is different in two ranges of k. For \(k > 10^{-4}\) m\(^{-1}\), thermal conduction is the dominant damping mechanism, so the larger the amount of helium, the shorter \(\tau _{{\mathrm {d}}}\) because of the enhanced thermal conduction by neutral helium atoms. On the other hand, radiative losses are more relevant for \(k < 10^{-4}\) m\(^{-1}\). In this region, the thermal mode damping time grows as the helium abundance increases. Since these variations in the damping time are very small, we again conclude that the damping time obtained in the absence of helium does not significantly change when helium is taken into account. Therefore, the inclusion of neutral or single ionised helium in partially ionised prominence plasmas does not modify the behaviour of linear, adiabatic or non-adiabatic MHD waves already found by Forteza et al. (2007) and Forteza et al. (2008).
The time damping of non-adiabatic MHD waves in a flowing partially ionised plasma with prominence-like physical conditions was analysed by Barceló et al. (2011). The authors solved the dispersion relation for Alfvén, fast, slow and thermal waves considering non-adiabatic single fluid equations for a partially ionised plasma in the presence of background mass flows. The presence of a background flow in a partially ionised plasma gives rise to the appearance of two critical wavenumbers that constrain the propagation properties of fast and Alfvén waves. The damping of these waves is dominated by resistive effects and leads to damping ratio values well above those observed. On the other hand, slow and thermal damping is dominated by non-adiabatic effects. For slow waves, very long period oscillations (\(10^3\)–\(10^5\) min) with very large damping times (\(10^3\)–\(10^6\) min) would enable to obtain damping ratio values close to those observed. Therefore, except for this unrealistic case, ion-neutral collisions are found to be an inefficient mechanism to explain the observed damping ratio (\(\tau _{{\mathrm {d}}}/P\)).
7.2.2 Cylindrical filament thread model
Soler et al. (2009b) applied the equations derived by Forteza et al. (2007) to the study of MHD waves in a partially ionised filament thread modelled as an infinite cylinder with radius a embedded in the solar corona (see Fig. 44). As in Forteza et al. (2007), the one-fluid approximation for a hydrogen plasma was considered. The internal and external media are characterised by their densities, temperatures and their own relative densities of neutrals, ions and electrons. The contribution of the electrons is neglected. The coronal medium is considered as fully ionised, while the ionisation fraction in the prominence plasma, \(\tilde{\mu }_{{\mathrm {p}}}\), is allowed to vary.
The presence of critical wave numbers is also found in the case of transverse kink waves (middle panels of Fig. 66). Within the range of observed wavelengths, the phase speed closely corresponds to its ideal counterpart, \(c_{\mathrm k}=\omega /k_z\), so non-ideal effects are irrelevant for wave propagation. The behaviour of the damping rate as a function of wavelength and ionisation fraction is seen to closely resemble the result obtained for Alfvén waves, with \(\tau _{{\mathrm {d}}}/P>10\) in the range of observed wavelengths. Therefore, neither ohmic diffusion nor ion-neutral collisions seem to produce damping times as short as those observed for kink waves in filament threads. Only for an almost neutral plasma, with \(\tilde{\mu }_{{\mathrm {p}}}> 0.95\), the obtained damping rates are compatible with the observed time-scales. Just like for Alfvén waves, ohmic diffusion dominates for small wavenumbers, while ion-neutral collisions are the dominant damping mechanism for large wavenumbers.
Regarding slow waves (bottom panels of Fig. 66), Soler et al. (2009b) concentrated their analysis on the radially fundamental mode with \(m=1\), since the behaviour of the slow mode is weakly affected by the value of the azimuthal wavenumber. Slow wave propagation is constrained by only one critical wavenumber, that strongly depends on the ionisation fraction, in such a way that for \(k_z\) below this critical wavenumber the wave is totally damped. More importantly, for large enough values of the ionisation fraction, the corresponding critical wavelength lies in the range of observed wavelengths of filament oscillations. As a consequence, the slow wave might not propagate in filament threads under certain circumstances. As for the damping rate, it is found that ion-neutral collisions are a relevant damping mechanism for slow waves, since very short damping times are obtained, especially close to the critical wavenumber. By comparing the particular effects of ohmic diffusion and ion-neutral collisions, the slow mode damping is seen to be completely dominated by ion-neutral collisions. Ohmic diffusion is found to be irrelevant, since the presence of the critical wavenumber prevents slow wave propagation for small wavenumbers, where ohmic diffusion would start to dominate.
7.3 Resonant damping of infinitely long thread oscillations
The phenomenon of resonant wave damping in non-uniform plasmas has been extensively studied in connection to wave-based coronal heating mechanisms (Ionson 1978) and the damping of transverse coronal loop oscillations (Hollweg and Yang 1988; Ruderman and Roberts 2002; Goossens et al. 2002, 2010). The mechanism relies in the energy transfer from the transverse kink mode to small scale Alfvén waves because of the plasma inhomogeneity at the transverse spatial scales of the structures. This idea was put forward by Arregui et al. (2008b), whose analysis is restricted to the damping of kink oscillations due to the resonant coupling to Alfvén waves in a pressureless (zero plasma-\(\beta \)) plasma. It was extended to the case in which both the Alfvén and the slow resonances are present by Soler et al. (2009). Here we discuss the main results from these works, whose aim is to assess the damping properties of resonant absorption. For this reason, the considered configurations are based on the infinitely long thread model of Fig. 43.
7.3.1 Resonant damping in the Alfvén continuum
MHD waves of axisymmetric one-dimensional cylindrical flux tubes are characterised by two wave numbers, i.e., the azimuthal wavenumber, m, and the axial wavenumber, \(k_z\). They can have different nodes in the radial direction. Arregui et al. (2008b) concentrated their analysis on the radially and longitudinally fundamental transverse wave with azimuthal number \(m=1\), the kink mode. This eigenmode is consistent with the detected Doppler velocity variations (see Sect. 5.9.4) and their associated transverse motions, discussed in Sect. 6.3.1. The frequency of this mode is not influenced by the presence of a layer with small thickness, so the result of Sect. 6.3.1 is approximately correct; see Eq. (30).
Quantitative parametric results for the damping of resonant kink waves in prominence threads as a function of the relevant parameters are given by Arregui et al. (2008b). The accuracy of the analytical approximations is compared to full numerical results, beyond the long wavelength and thin boundary approximations. These results are shown in Fig. 68. The damping is affected by the density contrast in the low contrast regime and \(\tau _{{\mathrm {d}}}/P\) rapidly decreases for increasing thread density (Fig. 68a). Interestingly, \(\tau _{{\mathrm {d}}}/P\) stops depending on this parameter in the large contrast regime, typical of filament threads. The damping time over period is independent of the wavelength of perturbations (Fig. 68b), but rapidly decreases with increasing inhomogeneity length-scale (Fig. 68c).
Resonant damping in the Alfvén continuum appears to be a very efficient mechanism for the attenuation of transverse thread oscillations, especially because large density contrasts and transverse plasma inhomogeneities are combined together. The possible role of this mechanism in the heating of prominence plasmas has received strong support by observations and numerical modelling by Okamoto et al. (2015) and Antolin et al. (2015). This was possible because of the combination of simultaneous thread oscillations in the plane of the sky and along the line-of-sight, carried out by Okamoto et al. (2015) and the numerical and forward modelling of observational signatures by Antolin et al. (2015). In particular, the relative temporal phase shift between the plane of the sky displacements determined from Hinode/SOT Ca ii H images and the Doppler velocities from spectra taken with IRIS in the Mg ii k line take values in between 90 and 180 degree, in accordance with the forward modelling of resonantly damped transverse oscillations in a 3D flux tube model. In addition, signatures of heating from chromospheric to transition region temperatures were found in the form of a fading and thinning of the intensity in chromospheric lines and the corresponding broadening and intensity enhancement in transition region lines, both in the observations (Okamoto et al. 2015) and the numerically forward modelled synthetic data (Antolin et al. 2015).
7.3.2 Resonant damping in the slow continuum
Although the plasma-\(\beta \) in solar prominences is probably small, it is definitely non-zero. Soler et al. (2009) showed that, in prominence plasmas, resonant damping of kink waves can additionally be produced due to the coupling to slow continuum waves. In the context of coronal loops, which are presumably hotter and denser than the surrounding corona, the ordering of sound, Alfvén and kink speeds does not allow for the simultaneous matching of the kink frequency with both Alfvén and slow continuum frequencies. Because of their relatively higher density and lower temperature conditions, this becomes possible in the case of prominence threads. Therefore, the kink mode phase speed is also within the slow (or cusp) continuum, which extends between the internal and external sound speeds, in addition to the Alfvén continuum. By considering gas pressure in the cylindrical thread model of Arregui et al. (2008b), Soler et al. (2009) evaluated the contribution of the damping due to the slow continuum to the total resonant damping of the kink mode.
This analytical predictions were further confirmed by Soler et al. (2009) by performing numerical computations outside the thin tube and thin boundary approximations. Figure 69 shows that the slow resonance is much less efficient than the Alfvén resonance. For the wavenumbers relevant to observed prominence oscillations, the value of \(\tau _{{\mathrm {d}}}/P\) due to the slow resonance is between 4 and 8 orders of magnitude larger than the same ratio obtained for the Alfvén resonance. The overall conclusion by Soler et al. (2009) is that the slow resonance is very inefficient when it comes to damping the kink mode for typical prominence conditions and in the observed wavelength range. The damping times obtained with this mechanism are comparable to those due to the thermal effects discussed in Sect. 7.1. Hence, resonant damping of transverse thread oscillations is governed by the Alfvén resonance.
7.4 Resonant damping of global prominence oscillations
The results described in Sect. 7.3 consider oversimplified models of transverse prominence thread oscillations and their damping by resonant absorption. The oscillations are monochromatic and, hence, the energy is transferred to a particular location at the flux tube boundary, where the kink mode frequency matches the corresponding Alfvén or slow continuum frequency. In reality, the magnetic and plasma structure of prominences is more complex and only recently numerical models describing the damping of global prominence oscillations and the transfer of energy to small spatial scales by resonant damping were considered.
Terradas et al. (2016) identify three possible sources of attenuation that could explain the damping present in Fig. 70: resonant damping, wave leakage, and numerical diffusion. Numerical diffusion is discarded since convergence tests shows that this effect is irrelevant for the spatial resolution used in their simulation. Wave leakage cannot account for the observed attenuation of the signal neither, because Alfvénic modes in the coronal environment have frequencies that are above the global mode frequency, in the considered system. The resonant or continuum damping remains as the only possible cause and was analysed in more detail.
Further confirmation of this process taking place comes from the analysis of the power spectrum of the oscillatory signal at two different locations inside the simulation box, one close to the centre of the prominence and another at the transition region between the prominence and the corona (Fig. 72). By computing the power spectrum at these two locations, Terradas et al. (2016) find that the dominant periodicity at the centre of the prominence is the one corresponding to the global mode (8 min), while at the prominence–corona transition region an additional frequency is present, with a period of 5.25 min, which corresponds to a particular Alfvén continuum mode. A similar coexistence of global and local frequencies was reported by Terradas et al. (2008) in a multi-stranded coronal loop model and interpreted as evidence of the physical process of resonant damping of the global mode to Alfvén waves of local character.
The overall conclusion by Terradas et al. (2016), regarding resonant damping processes, is that realistic 3D numerical solutions in complex magnetic flux rope configurations show compelling evidence about the transfer of energy from the initial global oscillation of the whole prominence to Alfvén continuum modes at the edges of the cool and dense plasma structure.
7.5 Resonant damping in partially ionised infinitely long threads
7.5.1 Temporal damping
Damping by resonant absorption in a partially ionised prominence plasma was studied by Soler et al. (2009d), who integrated both mechanisms in a non-uniform cylindrical prominence thread model in order to assess their combined effects. Partial ionisation is relevant for the damping of short wavelength fast waves (Forteza et al. 2007), while resonant damping of kink waves is efficient whenever a transverse density inhomogeneity is present. The question arises on whether partial ionisation affects the mechanism of resonant absorption and viceversa.
The model adopted by Soler et al. (2009d) has the magnetic and density structuring of the models used in Sect. 7.3 (see Fig. 67), but the plasma properties are also characterised by the ionisation fraction, \(\tilde{\mu }\). The radial behaviour of the ionisation fraction in threads is unknown, so Soler et al. (2009d) assumed a one-dimensional transverse profile akin to the one employed to model the equilibrium density. The thread ionisation fraction, \(\tilde{\mu }_{{\mathrm {p}}}\), is considered a free parameter and the corona is assumed to be fully ionised, so \(\tilde{\mu }_{{\mathrm {c}}}= 0.5\). The non-uniform transitional layer of thickness l therefore connects two plasmas with densities \(\rho _{{\mathrm {p}}}\) and \(\rho _{{\mathrm {c}}}\) and ionisation degrees \(\tilde{\mu }_{{\mathrm {p}}}\) and \(\tilde{\mu }_{{\mathrm {c}}}\). Soler et al. (2009d) used the one-fluid approximation and, for simplicity, the \(\beta =0\) limit, which excludes slow waves. The quantities \(\eta \), \(\eta _{\mathrm C}\) and \(\eta _{\mathrm H}\) are here functions of the radial direction.
Figure 75 displays the ranges of \(k_z a\) for which Cowling’s and Hall’s diffusion dominate. Hall’s diffusion is irrelevant in the whole range of \(k_z a\) studied by Soler et al. (2009d), while Cowling’s diffusion dominates the damping for large \(k_z a\). In the whole range of relevant wavelengths, resonant absorption is the most efficient damping mechanism and the damping time is independent of the ionisation degree, as predicted by the analytical result (Eq. 40). On the contrary, ohmic diffusion dominates for very small \(k_z a\). In this region, the damping time related to Ohm’s dissipation becomes even shorter than that due to resonant absorption, which means that the kink wave is mainly damped by Ohmic diffusion.
7.5.2 Spatial damping
Motivated by the spatially damped propagating waves observed by Terradas et al. (2002) (see Sect. 5.9.3), the spatial damping of linear non-adiabatic magnetohydrodynamic waves in a homogenous, unbounded, magnetised and fully ionised plasma was studied by Carbonell et al. (2006). The spatial damping in a flowing partially ionised plasma has been studied by Carbonell et al. (2010). Carbonell et al. (2006) found that the thermal (fast) wave shows the strongest (weakest) spatial damping. For periods longer than 1 s the spatial damping of magnetoacoustic waves is dominated by radiation, while at shorter periods the spatial damping is dominated by thermal conduction. Therefore, radiative effects on linear magnetoacoustic slow waves can be a viable mechanism for the spatial damping of short period prominence oscillations, while thermal conduction does not play any role. On the other hand, Carbonell et al. (2010) found that in the presence of a background flow, new strongly damped fast and Alfvén waves appear whose features depend on the joint action of flow and resistivity. The damping lengths of adiabatic fast and slow waves are strongly affected by partial ionisation, which also modifies the ratio between damping lengths and wavelengths. For non-adiabatic slow waves, the unfolding in both wavelength and damping length induced by the flow allows efficient damping for periods compatible with those observed in prominence oscillations. In the case of non-adiabatic slow waves and within the range of periods of interest for prominence oscillations, the joint effect of both flow and partial ionisation leads to efficient spatial damping of oscillations. For fast and Alfvén waves, the most efficient damping occurs at very short periods not compatible with those observed in prominence oscillations.
For typically reported periods of thread oscillations, resonant absorption is an efficient mechanism for the kink mode spatial damping, while ion-neutral collisions have a minor role. Cowling’s diffusion dominates both the propagation and damping for periods much shorter than those observed, while resonant absorption could explain the observed spatial damping of kink waves in prominence threads.
7.6 Resonant damping in partially ionised finite length threads
The results described in Sects. 7.3, 7.5.1 and 7.5.2 indicate that, because of the coupling of kink waves to Alfvén waves, resonant absorption constitutes a very plausible mechanism for the explanation of the observed spatial and time decay of transverse oscillations. The main limitation of these studies is that they adopt a one-dimensional density model that might not be appropriate in view of the longitudinal structuring of prominence threads. This led Soler et al. (2010a) to investigate the time damping properties of two-dimensional thread models, that is, with density inhomogeneity across the thread and along the magnetic tube in which it is contained. In this study, resonant absorption and damping by partial ionisation effects were considered simultaneously.
The accuracy of the above analytical solutions can be assessed by numerically solving the general dispersion relation derived by Soler et al. (2010a). Here we only show the results obtained by Soler et al. (2010a) for the case in which the prominence thread is centred in the tube.
In the case without transverse transitional layer, \(l/a=0\), damping is only due to Cowling’s diffusion. Figure 80a displays the period as a function of \(L_{{\mathrm {p}}}/L\) for different values of the ionisation degree in the prominence region, whereas Fig. 80b shows the corresponding values of the damping time. As can be seen, the period increases when the length of the thread is increased and tends to the value for a homogeneous prominence cylinder when \(L_{{\mathrm {p}}}/L \rightarrow 1\). In addition, the period is independent of the ionisation degree. On the contrary, the damping time strongly depends on the ionisation degree, and for a fixed \(\tilde{\mu }_{{\mathrm {p}}}\) it slightly increases as \(L_{{\mathrm {p}}}/L\) becomes larger. In all solutions, the analytical expressions for the period and the damping time are in agreement with the solution of the full dispersion relation for realistic, small values of \(L_{{\mathrm {p}}}/L\), i.e., \(L_{{\mathrm {p}}}/L \le 0.4\), whereas the approximate expressions diverge from the actual solution when the prominence region occupies most of the magnetic tube. Figure 80c displays \(\tau _{{\mathrm {d}}} / P\) versus \(L_{{\mathrm {p}}}/L\). The numerical solution shows little dependence on \(L_{{\mathrm {p}}}/L\), while the analytical approximation (Eq. 41) diverges from the numerical value in the limit of large \(L_{{\mathrm {p}}}/L\). Given the obtained large values of \(\tau _{{\mathrm {d}}} / P\), Soler et al. (2010a) concluded that the efficiency of the damping due to Cowling’s diffusion in a partially filled flux tube does not improve with respect to the longitudinally homogeneous tube case shown in Sect. 7.5.1.
In summary, the dominant damping mechanism is resonant absorption, which produces damping ratios in agreement with the observations, whereas ion-neutral collisions are irrelevant for the damping. The values of the damping ratio are independent of both the prominence thread length and its position within the magnetic tube, and coincide with the values for a tube fully filled with the prominence plasma. A recent study that further analyses resonant damping of thread oscillations in two-dimensional equilibrium models can be found in Arregui et al. (2011). These authors additionally analysed the influence of the density in the evacuated part of the thread. This quantity is seen to influence periods and damping times, but has little influence on the damping rate of transverse thread oscillations. The implications of some of these results for the determination of physical properties in transversely oscillating threads are discussed in Sect. 8.
7.7 Resonant damping in flowing prominence threads
Two typical features of the observed oscillations in prominence threads are the time damping of the amplitude of transverse motions and the simultaneous presence of mass flows along the threads. The theoretical analysis of their joint effect on the amplitude of transverse thread oscillations was performed by Soler et al. (2012). By interpreting the observed oscillations as transverse MHD kink waves, damped by resonant absorption, and the observed flows as the motion of the thread material along the prominence magnetic structure, a governing equation describing the temporal and spatial evolution for the transverse displacement of the fundamental mode of the magnetic tube was solved.
Figure 82 shows an example solution for the thread displacement as a function of time for different values of the flow velocity. As can be appreciated, a progressive shift between the solutions corresponding to different flow velocities is obtained. The reason is that the instantaneous period is a function of the mass flow. When the transitional layer is very thin, so that the damping by resonant absorption is weak, the variation of the amplitude is mainly governed by the effect of the flow. In the example solutions displayed in Fig. 82, a layer 0.1 times the radius of the tube was chosen, so the amplitude is weakly affected by the flow velocity.
7.8 Damping by wave leakage
The solutions obtained for the oscillations of prominence line current models (Oord and Kuperus 1992; Schutgens 1997a, b; Oord et al. 1998) mentioned in Sect. 4.4 suggest the existence of time amplification and damping of the studied oscillations. While the amplification should be linked to a prominence destabilisation, the attenuation seems to be very efficient for many of the considered parameter values, and the ratio of the damping time to the period is between 1 and 10 (i.e., in agreement with observations). This indicates that the oscillations are efficiently damped (Fig. 83a). On the other hand, in the prominence model used by Schutgens and Tóth (1999) vertical oscillations are very efficiently attenuated for all the parameters considered and the same happens with horizontal oscillations (Fig. 83b) for coronal densities above \(\simeq 5\times 10^{-13}\) kg m\(^{-3}\). These constraining properties of damped horizontal and vertical oscillations could be used for prominence seismology.
8 Prominence seismology
Solar atmospheric seismology aims to determine physical parameters that are difficult to measure by direct means in magnetic and plasma structures. It is a remote diagnostics method that combines observations of oscillations and waves in magnetic structures, together with theoretical results from the analysis of oscillatory properties of given theoretical models. The philosophy behind this discipline is akin to that of Earth seismology, the sounding of the Earth interior using seismic waves, and helio-seismology, the acoustic diagnostic of the solar interior. It was first suggested by Uchida (1970) and Roberts et al. (1984), in the coronal context, and by Tandberg-Hanssen (1995) in the prominence context. The increase in the number and quality of high resolution observations in the 1990s has lead to the rapid development of solar atmospheric seismology. In the context of coronal loop oscillations, recent applications of this technique have allowed the estimation and/or restriction of parameters such as the magnetic field strength (Nakariakov and Ofman 2001), the Alfvén speed in coronal loops (Zaqarashvili 2003; Arregui et al. 2007; Goossens et al. 2008), the transversal density structuring (Goossens et al. 2002; Verwichte et al. 2006; Arregui et al. 2015), the coronal density scale height (Andries et al. 2005; Verth et al. 2008; Arregui et al. 2013) or the estimation of the adiabatic index in the oscillating plasma (Doorsselaere et al. 2011).
The application of inversion techniques to prominence seismology is less developed. This is due to the complexity of these objects in comparison to, e.g., coronal loops. Recent advances in the theoretical modelling of large amplitude oscillations have enabled to relate observed periodicities with properties of the global magnetic field structure supporting the oscillating plasma (see, e.g., Luna et al. 2014). Also, the refinement of theoretical models that incorporate the fine structuring of prominences and the high resolution observations of small amplitude oscillations have produced an increase in prominence seismology studies. Several techniques for the inversion of physical parameters have been developed that make use of observational estimates for quantities such as phase velocities, periods, damping times and flow speeds. In general, the solution to the inverse problem cannot give a single value for all the physical parameters of interest. However, important information about unknown physical quantities can be obtained using this method. Bayesian inference methods, widely used in other areas, are now being implemented in prominence seismology. They enable to diagnose the physical conditions of interest in a probabilistic framework. The most relevant results of the MHD prominence seismology technique are here discussed.
The theoretical models described in Sect. 6 make use of different conceptual views of prominences, such as the string model, the slab model and the thread model for their fine structure. Seismology efforts in the area have followed the same pattern. We describe them in increasing intricacy order, starting with a mechanical analogue (Sect. 8.1), followed by slab models (Sect. 8.2) and ending with the seismology of fine structure oscillations (Sects. 8.3–8.6). The emerging field of Bayesian prominence seismology is discussed in Sect. 8.7, by providing examples of applications in parameter inference and model comparison.
8.1 Seismology of large amplitude prominence oscillations
Several studies have made use of the observed characteristics of large amplitude oscillations in prominences to deduce physical parameters of these objects. The classic example is the interpretation by Hyder (1966) of the winking filament phenomenon. This author modelled the eleven winking filament events reported by Ramsey and Smith (1965) as damped harmonic oscillators and obtained estimates of the vertical magnetic field strength in the range 2–30 G and of the coronal coefficient of viscosity. Another classic determination was made by Kleczek and Kuperus (1969) using Eq. (3). Once the period of oscillation (P) is known, the length of the filament (L) has been measured and a typical density (\(\rho \)) has been assumed, the strength of the magnetic field (B) could be determined. In addition, they estimated the energy needed to induce the oscillations to be in the range \(10^{19}\)–\(10^{20}\) J. In spite of their simplicity, these models have been used to perform prominence seismology in recent observations. For instance, Isobe and Tripathi (2006) used the Kleczek and Kuperus (1969) model to perform prominence seismology of a pre-erupting filament. Assuming typical prominence values for the density and knowing the length of the filament, a magnetic field strength of 9.8 \(\mathrm G\) and an Alfvén speed of 87 \({\mathrm {km\ s}}^{-1}\) were determined. Transverse oscillations observed by Gilbert et al. (2008) and Gosain and Foullon (2012) were also interpreted in terms of the Kleczek and Kuperus (1969) model, and this interpretation allowed to determine values for the magnetic field of 30 and 25 G, respectively. Furthermore, using the line-of-sight velocity, Gilbert et al. (2008) determined the total maximum kinetic energy involved in the oscillations, that was of the order of \(10^{19}\)–\(10^{20}\) J. Hyder’s model has also been used by Shen et al. (2014a) to determine the radial component of the magnetic field in the observed chain of winking filaments.
Vršnak et al. (2007) reported on \(\text {H}_{\alpha }\) observations of large amplitude, large scale periodical plasma motions along the axis of a filament. They plugged the wave period and the length of the filament into Eq. (6) to infer the Alfvén speed \(v_\mathrm{A\varphi } \sim 100\) \({\mathrm {km\ s}}^{-1}\). By further assuming that the number density of the prominence plasma is in the range \(10^{10}\)–\(10^{11}\) cm\(^{-3}\), the azimuthal magnetic field strength results in the range 5–15 G. Next, measuring the pitch angle, Vršnak et al. (2007) additionally determined the internal structure of the flux rope helical magnetic field, from which the axial magnetic field strength was estimated to be in the range 10–30 G. The twisted flux rope model was also invoked by Pintér et al. (2008) in their analysis of SOHO EUV observations of large amplitude transverse oscillations in a polar crown filament previously studied by Isobe and Tripathi (2006). Oscillations were present along a foot belonging to a larger prominence structure, occurred prior to the eruption of the full structure and wavelet analysis tools were used to shed light into the temporal and spatial behaviour of oscillations. The analysis of the spatial properties of the oscillations shows evidence of a global standing transverse oscillation, although some small scale oscillations within the structure cannot be discarded. Using the twisted flux rope model for the filament and based on the same scenario and analysis as Vršnak et al. (2007), the azimuthal Alfvén speed component was estimated to be \(v_\mathrm{A\varphi }=49\) \({\mathrm {km\ s}}^{-1}\) and the poloidal magnetic field strength in the range 2–10 G. In this case, the pitch angle could not be measured. By assuming a mean value of 65\(^\circ \), Pintér et al. (2008) estimated that the axial component of the magnetic field must be in the range 1–5 G.
From the analysis of the longitudinal oscillations of a filament observed with SDO, and assuming that gravity was the restoring force, Luna et al. (2014) used Eqs. (4) and (5) to calculate the radius of curvature of the dipped magnetic field lines, which was in the range \(43 - 66\) Mm, and the minimum magnetic field strength at the field line dips obtaining \(14 \pm 8\) G. The validity of this approach was tested by Luna et al. (2016b) using numerical simulations and the agreement of the numerical results with the Luna and Karpen (2012) theoretical model was excellent (see Sect. 4.3). Also, following Luna and Karpen (2012) they computed the mass accretion rate, needed to explain the observed damping, which was of the order of (\(36 \pm 27) \times 10^6\) kg h\(^{-1}\) in agreement with the predictions of the thermal non-equilibrium model (Luna et al. 2012b). Finally, they calculated the energy injected to the filament by the jet triggering the oscillations which is in the range \(10^{17}\)–\(10^{20}\) J, although this quantity is only an unknown fraction of the total energy released by the energetic event (Zhang et al. 2013). Luna et al. (2014) concluded that since the derived properties were almost uniform along the filament this was an indication of a high degree of cohesiveness along the filament channel. Following Luna and Karpen (2012), Li and Zhang (2012), Bi et al. (2014) and Zhang et al. (2017) estimated the minimum magnetic field strengths in filament threads undergoing longitudinal oscillations. These strengths were in the range 28–55 G in the first case and equal to 15 G in the second and third case. Furthermore, Zhang et al. (2017) using Eq. (4) and the determined periods (see Sect. 3.3) estimated the curvature radius of the magnetic dips supporting the filament. The results, between 70 and 134 Mm, were higher than those computed in Luna et al. (2014).
The main limitation of prominence diagnostics using large amplitude oscillations is the lack of a sufficiently detailed, and at the same time sophisticated, physical model to explain the observations. This degree of refinement is now being incorporated to the modelling of small amplitude oscillations in prominence fine structures at a much greater pace, and has produced some relevant results that we discuss below.
8.2 Seismology of prominence slabs
The MHD wave properties for slab models of prominences are described in Sect. 6.2. Two relevant studies have made use of some of these models to infer physical properties in prominences. Their methodology is based on the identification of observed oscillations with theoretical eigenmodes.
Régnier et al. (2001) consider the possible theoretical modes that can explain their observations of oscillations in an active region filament. The slab model with a uniform and inclined magnetic field by Joarder and Roberts (1993b) is used (see Fig. 39). The dispersion relations for Alfvén modes and magnetoacoustic modes are considered. They give the frequency of six fundamental modes: the symmetric Alfvén, slow and fast kink modes and the antisymmetric Alfvén, slow and fast sausage modes, as a function of the prominence parameters. Observations provide with estimates for the width (8000 km) and length (63,000 km) of the filament. Assumptions on other parameters, such as the temperature of the filament (8000 K) and of its environment (10\(^6\) K), the density of the slab (10\(^{12}\) cm\(^{-3}\)), the magnetic field strength (20 G) and for the angle between the magnetic field and the long axis of the slab (25\(^\circ \)) are made. The dispersion relations are then solved by using these parameters and the corresponding periods are obtained and classified.
Observations and Fourier analysis of Doppler velocity time series enable Régnier et al. (2001) to detect intermediate (between 5 and 20 min in this case) and long ( > 40 min) period oscillations. From the comparison between the observed and calculated frequencies, an identification method of the oscillation modes in the observed filament is presented. The method makes use of the fact that the frequency ratio of the fundamental even Alfvén mode to the fundamental odd Alfvén mode only depends on the ratio of the half-with of the slab to the half-length of the filament. This quantity is measurable. The same applies to the frequency ratios involving the slow kink/sausage and fast kink/sausage modes. Parametric calculations for the frequencies as a function of the magnetic field strength and the inclination angle, while keeping the slab density constant, are next performed. A diagnostic of the observed filament is obtained by looking for the parameters values that enable the matching of theoretical and observed frequencies. By following this method, the angle between the magnetic field and the long axis of the slab is estimated to be 18\(^\circ \). Using this value, an algebraic relation for the magnetic field strength as a function of the slab density is derived.
A more involved and ambitious diagnostic, using the Joarder and Roberts (1993b) slab model, was performed by Pouget et al. (2006). The long duration and high temporal resolution observations with CDS/SoHO enable these authors to detect and measure the entire range of periodicities theoretically expected in a filament. In particular both the short (less that 10 min) and the long ones (more than 40 min) are detected.
The detailed analysis of three filaments is presented. The seismic inversion technique closely follows that by Régnier et al. (2001), in the sense that the first step towards the diagnostic is the use of frequency ratios between fundamental even/odd (kink/sausage) modes. These ratios only depend on the ratio of the filament half-width to its half-length. Once this ratio is measured, with a given uncertainty, Pouget et al. (2006) assume that their 16-h long observation has allowed them to observe the six modes of interest, since the slowest mode is expected at a period of 5 h, for standard prominence parameters.
The inversion method first assigns a possible triplet of measured frequencies to the three odd fundamental frequencies (odd Alfvén, slow sausage and fast sausage modes). The coherence of each choice is examined against two tests. The first requires to find three corresponding even frequencies, with the condition that the even/odd frequency ratios are consistent with the measured half-width to half-length ratio. The second involves the inferred values for the density, temperature, magnetic field inclination angle and magnetic field strength to be consistent with typical values reported in the literature. For each test, if the test was negative, the full triplet was changed and the series started again. On the contrary, if the tests succeeded, Pouget et al. (2006) considered that the six fundamental modes were identified.
The three filament observations led to coherent diagnostics and a single possible set of frequencies was found for each observation. The importance of this study is its ability to simultaneously determine the values of the inclination angle, temperature and Alfvén speed for the same prominence. The drawback is that the modeling, as in Régnier et al. (2001), does not permit to capture the highly inhomogeneous nature of prominences.
8.3 Seismology of propagating transverse thread oscillations
Transverse thread oscillations observed by Lin et al. (2009) and discussed in Sect. 5.9.4 show evidence of waves propagating along individual threads. Ten of the swaying threads were chosen by Lin et al. (2009) for further investigation, and for each selected thread two or three perpendicular cuts were made in order to measure the properties of the propagating waves. Periods and amplitudes of the waves, as well as their phase velocity, were derived for each thread. Lin et al. (2009) interpreted the observed events as propagating MHD kink waves supported by the thread body. This mode is the only one producing a significant transverse displacement of the cylinder axis. In addition, it also produces short-period oscillations of the order of minutes, compatible with the observed periods (see Sect. 6.3.1).
8.4 Seismology of damped transverse thread oscillations
The transverse inhomogeneity length scale of an oscillating thread could also be estimated by using observations of spatial damping of propagating kink waves and theoretical results described in Sect. 7.5.2. In the context of coronal loops, Terradas et al. (2010) have shown that the ratio of the damping length to the wavelength, due to resonant damping of propagating kink waves, has the same dependence on the density contrast and transverse inhomogeneity length-scale as the ratio of the damping time to the period for standing kink waves. Similar inversion techniques to the ones explained here for the temporal damping of oscillations could be applied to the spatial damping of propagating waves.
Seismology using the period and damping time of kink oscillations has been applied to global oscillations in a solar filament observed in \(\text {H}_\alpha \) with the National Solar Observatory GONG instrument by Pant et al. (2015). The oscillations are generated by an M1.1-class flare and produce periods of about 61–67 min with damping times of 92–117 min. Using the theory of resonant absorption and the analytical inversion scheme by Goossens et al. (2008), the study obtains constraints on the filament Alfvén speed and the transverse density inhomogeneity length-scale, for varying values of the density contrast. By further estimating the filament density using an automated Differential Emission Measure (DEM) analysis technique, estimates for the filament magnetic field strength in the range \(\sim \) 0.6–1.2 G are obtained. The analysis by Pant et al. (2015) is a nice example of the applicability of this kind of technique, although the modelling of the global filament structure as a single magnetic flux tube presents some limitations.
Going back to filament threads, the main downside of the technique just described is the use of thread models in which the full magnetic tube is filled with cool and dense plasma. The solution to the forward problem in the case of two-dimensional thread models is discussed in Sect. 7.6. The analytical and numerical results obtained by Soler et al. (2010a) using these models indicate that the length of the thread and its position along the magnetic tube influence the period and damping time of transverse thread oscillations. On the contrary, the damping ratio is rather insensitive to these model properties.
An example of the inversion of physical parameters for different values of the thread length was presented by Soler et al. (2010a). When partially filled threads, i.e., with the dense part occupying a length \(L_{{\mathrm {p}}}\) shorter than the total length of the tube L, are considered, one curve is obtained for each value of the length of the thread. The solutions to the inverse problem are shown in Fig. 86a for a set of values of \(L_{{\mathrm {p}}}\). Even if each curve gives an infinite number of solutions, again each of them defines a rather constrained range of values for the thread Alfvén speed. The figure shows that the ratio \(L_{{\mathrm {p}}}/L\) is a fundamental parameter in order to perform an accurate seismology of prominence threads, since different curves produce different estimates for the prominence Alfvén speed, as anticipated above. Because of the insensitiveness of the damping ratio with respect to the length of the thread, all solution curves for different lengths of the threads produce the same projection onto the (\(\zeta \), l / a)-plane. Hence, the same precise estimates of the transverse inhomogeneity length scale obtained from infinitely long thread models are valid, irrespective of the length of the thread. The computation of the magnetic field strength from the obtained seismological curve requires the assumption of a particular value for either the filament or the coronal density. The resulting curves for a typical coronal density and several values of \(L_{{\mathrm {p}}}/L\) are shown in Fig. 86b. Here again, precise values of the magnetic field strength cannot be obtained, unless the prominence density is accurately known.
8.5 Seismology using period ratios of thread oscillations
The widespread use of the concept of period ratios as a seismological tool has been remarkable in the context of coronal loop oscillations (see Andries et al. 2009, for a review). The idea was first put forward by Andries et al. (2005) and Goossens et al. (2006) as a means to infer the coronal density scale height using multiple mode oscillations in coronal loops embedded in a vertically stratified atmosphere. In coronal loop seismology, the ratio of the fundamental mode period to twice that of its first overtone in the longitudinal direction (\(P_1/2P_2\)) mainly depends on the density structuring along magnetic field lines. It can therefore be used as a diagnostic tool for the coronal density scale height.
The use of the period ratio technique needs the unambiguous detection of two periodicities in the same oscillating prominence thread. Díaz et al. (2010) pointed out two main difficulties in this respect. From a theoretical point of view, the overtone with period \(P_2\) is an antisymmetric mode in the longitudinal direction, with a node in the centre of the thread and two maxima located outside it. Only for sufficiently long threads, with \(W/L\sim 0.1\), the anti-nodes of the overtone are located inside the thread and could hence be measured in the part of the tube visible in, e.g., \(\text {H}_{\alpha }\). From an observational point of view, no conclusive measurement of the first overtone period has been reported so far in the literature, although there seem to be hints of its presence in some observations by, e.g., Lin et al. (2007), who reported on the presence of two periods, \(P_1=16\) min and \(P_2=3.6\) min in their observations of a prominence region, and where \(P_2\) could be associated with the second overtone. Díaz et al. (2010) used the period ratio from these observations to infer the value for the length of the thread ratio \(W/L=0.12\). Although it is difficult to estimate the length of the particular thread under consideration, assuming a value of 13,000 km, as for other threads analysed by Lin et al. (2007), results in a magnetic tube length \(L\sim 130{,}000\) km.
The concept of period ratios between the fundamental mode and the first overtone of transverse thread oscillations has been used to diagnose the density structuring along prominence fine structures by Soler et al. (2015), using continuous density profiles along the magnetic field instead of piecewise density models as done by Díaz et al. (2010). In their study, Soler et al. (2015) define three alternative density models, with Lorentzian, Gaussian and parabolic profiles (see Fig. 88a). The idea is to emulate density variations in which the plasma is more or less concentrated around the central part of the tube. The Lorentzian profile is similar to the piecewise models used by, e.g., Díaz et al. (2010). In the parabolic profile the dense prominence plasma is broadly distributed along the tube. Finally, the Gaussian profile represents an intermediate situation between Lorentzian and parabolic profiles. The relevant parameter in all three models is the ratio of densities between the internal density at the central part and at the end of a flux tube of length L, namely \( \chi =\rho _\mathrm{i,0}/\rho _{\mathrm{i}, L/2}\).
The period ratio of transverse thread oscillations is 2 in longitudinally homogeneous thin tubes, but differs from this value when longitudinal density inhomogeneity is introduced. By numerically solving the linear MHD wave equations for small amplitude perturbations produced by kink modes the dependence of the period ratio on the density gradient parameter \(\chi \) was obtained. The results are displayed in Fig. 88b. In agreement with previous works that used simple piecewise constant density profiles, Soler et al. (2015) find that the period ratio is larger than 2 in longitudinally inhomogeneous prominence threads. When the ratio of the central density to that at the footpoints is fixed, the period ratio depends strongly on the form of the density profile along the thread. The more concentrated the dense prominence plasma near the centre of the tube, the larger the period ratio is.
The Lorentzian profile produces a significant increase of the period ratio, with a value around 3.5 when \(\chi = 100\). The increase of the period ratio is small for the parabolic profile and reaches a value of about 2.2 when \(\chi = 100\). The results for the Gaussian profile intermediate to those obtained using the Lorentzian and parabolic profiles and the period ratio increase is moderate, with a value around 2.5 when \(\chi =100\). Interestingly, Soler et al. (2015) find that, by considering the spatially averaged density in the thread to be same for all three profiles, i.e., comparing thread models with the same total mass, the period ratio is independent of the specific density profile that is chosen (see Fig. 4c in Soler et al. 2015).
These computations are then used by Soler et al. (2015) to perform a seismology diagnostics of the density gradient parameter and to assess, in view of the obtained results, which one among the three alternatives density models is more likely. To this end, an empirical fit was first performed to the period ratio dependence on the average density for each of the profiles. By making use of the periodicities reported by Lin et al. (2007), with a period ratio of \(\sim \) 4.4 and inverting this dependency, Soler et al. (2015) find that the parabolic profile is unable to explain this particular observation, since this model predicts a constant ratio of 2.2 for large values of \(\chi \). The inversion leads to values for the ratio of central to footpoint density of \(\chi =347\) and \(\chi = 10^{48}\) for the Lorentzian and Gaussian profiles, respectively. The inferred values of \(\chi \) suggest that, among the three profiles, the Lorentzian profile may provide us with the best explanation for the ratio of the two periods reported by Lin et al. (2007). A more rigorous treatment of this model comparison problem, using Bayesian techniques, is presented in Sect. 8.7.2.
8.6 Seismology of flowing and oscillating prominence threads
Mass flows in conjunction with phase speeds, oscillatory periods and damping times might constitute an additional source of information about the physical conditions of oscillating threads. The first application of prominence seismology using Hinode observations of flowing and transversely oscillating threads was presented by Terradas et al. (2008), using observations obtained in an active region filament by Okamoto et al. (2007) discussed in Sect. 5.9.4.
The observations show a number of threads that flow following a path parallel to the photosphere while they oscillate in the vertical direction. The relevance of this particular event is that the coexistence of waves and flows can be firmly established, so that there is no ambiguity about the wave or flow character of a given dynamic feature: both seem to be present in this particular event. However, other interpretations for the apparent motion in the plane of the sky could be also possible, for instance, an ionisation wave or a thermal front. Okamoto et al. (2007) analysed six threads whose relevant measured properties are displayed in Table 2.
Summary of geometric and wave properties of horizontally flowing and vertically oscillating threads analysed by Okamoto et al. (2007)
Thread | \(L_\mathrm{p}\) (km) | \(v_0\) (\({\mathrm {km\ s}}^{-1}\)) | P (s) | V (\({\mathrm {km\ s}}^{-1}\)) | H (km) |
---|---|---|---|---|---|
1 | 3600 | 39 | 174 ± 25 | 16 | 18,300 |
2 | 16,000 | 15 | 240 ± 30 | 15 | 12,400 |
3 | 6700 | 39 | 230 ± 87 | 12 | 14,700 |
4 | 2200 | 46 | 180 ± 137 | 8 | 19,000 |
5 | 3500 | 45 | 135 ± 21 | 9 | 14,300 |
6 | 1700 | 25 | 250 ± 17 | 22 | 17,200 |
A more complete approach to the problem was followed by Terradas et al. (2008), who considered the numerical solution of the non-linear, ideal, low-\(\beta \) MHD equations with no further approximations, that is, the thin tube approximation was not used and the flow was maintained in the equations. The numerical results confirm the previous approximate results regarding the effect of the flow on the obtained periods and, therefore, on the derived Alfvén speed values. We must note that in this case, and because of the small value of the flow speeds measured by Okamoto et al. (2007) in this particular event, there are no significant variations of the wave properties, and hence of the inferred Alfvén speeds, although larger flow velocities may have more relevant consequences on the determination of physical parameters in prominence threads.
8.7 Bayesian prominence seismology
Solving the inversion problem to extract information about model parameters by comparison of their theoretical predictions to observed data is not straightforward. In contrast to the process of measurement of a physical quantity in a laboratory, the remote sensing of physical conditions has to be pursued without direct control of the parameters of interest and with information that is incomplete and uncertain. These difficulties, common to all areas in astrophysical research, have led to the development and application of Bayesian diagnostic methods.
8.7.1 Inference of magnetic field strength and transverse density inhomogeneity
Measuring periods and damping times of transverse thread oscillations enables to obtain information on the magnetic field strength in the threads and the transverse inhomogeneity length scale for the plasma density (see Sect. 8.4). The classic approach to the inversion problem, whose results are displayed in Fig. 85, dealt with finding the mathematical solution for the one-dimensional inversion curve in the three-dimensional parameter space by imposing the exact matching of the theoretically predicted period and damping time values with those observed.
To solve the inverse problem, Arregui et al. (2014) first gather the parameters to be inferred in the vector of unknowns \({{\varvec{\theta }}} = (v_{{\mathrm {Ap}}}, l/R)\) and the two observable quantities in \(D = (P, \tau _\mathrm{d})\). The prior probabilities for the parameters are taken to be uniform distributions, over a given range, for each of the unknowns. A Gaussian likelihood, which incorporates uncertainties on measured period and damping time, is adopted to perform the comparison between theoretically predicted and observed wave properties. Once the full posterior is computed, using Eq. (54), the so-called marginal posterior, \(p(\theta _i|D) = \int p(\theta | D) d\theta _1 \ldots d\theta _{i-1} d\theta _{i+1} \ldots d\theta _{N}\), provides us with the most probable values of a given parameter, \(\theta _i\), compatible with observed data D, in the form of a conditional probability distribution, \(p(\theta _i|D)\).
8.7.2 Field aligned density structure in prominence threads
Their results are displayed in Fig. 94. The three arbitrary density profiles discussed in Sect. 8.5 were considered with Lorentzian, Gaussian and parabolic shapes, denoted as \(\hbox {M}^\mathrm{L}\), \(\hbox {M}^\mathrm{G}\) and \(\hbox {M}^\mathrm{P}\), respectively. The distribution of marginal likelihoods for each of these models, shown in Fig. 94a, indicates that the parabolic and Gaussian profiles are likely to produce period ratios in the lower half of the considered period ratios range, from 2 to 4. Beyond that, their likelihood decreases significantly. Hence, if our observed period ratio is in the range between 2 and 4, it can be difficult to obtain significant evidence for one model to be preferred over the other. The Lorentzian profile is more likely to reproduce values of the period ratio larger than those that can be reproduced by the parabolic and the Gaussian profiles. The distribution peaks at about 4.4, but is rather extended and covers almost all values of the considered range for the period ratio.
In order to make statements on the relative plausibility of one model over another, based on quantitative calculations, Bayes factors were computed. To assign levels of evidence for a given model \(\hbox {M}^\mathrm{i}\) in front of the alternative \(\hbox {M}^\mathrm{j}\), based on the magnitude of the obtained Bayes factor \(BF^\mathrm{ij}\), the empirical table by Kass and Raftery (1995) was used. According to this table, values of \(2\log (BF^\mathrm{ij})\) in between 0 and 2 correspond to minimal evidence; values in between 2 and 6 correspond to positive evidence; values in between 6 and 10 to strong evidence; and values larger than 10 would indicate very strong evidence. The results displayed in Fig. 94b-d indicate that a Lorentzian density profile, with plasma density concentrated around the centre of the tube, seems to offer the most plausible inversion result. The model comparison results indicate that the evidence points to the Gaussian and parabolic profiles for period ratios in between 2 and 3, while the Lorentzian profile is preferred for higher period ratio values. This model comparison technique could be used to obtain information on the plasma structure along threads, provided period ratio measurements become widely available.
The two examples discussed in this section show that Bayesian analysis techniques exhibit great promise for prominence seismology. They enable us to quantify the grade of belief on unknown parameters taking on given values and to compare, in a quantitative way, the relative performance of alternative physical models in explaining observed data.
9 Open issues
Solar prominences are among the most complicated structures in the solar corona. A full understanding of their formation, magnetic structure and disappearance has not been reached yet, and a lot of physical effects remain to be included in prominence models. For this reason, theoretical models set up to interpret small amplitude oscillations are still poor. High-resolution observations of filaments suggest that they are made of threads whose thickness is at the the limit of the available spatial resolution. Then, one may wonder whether future improvements of the spatial resolution will provide with thinner and thinner threads or, on the contrary, there is a lower limit for thickness and we will be able to determine it in the future. The presence of these long and thin threads together with the place where they are anchored and the presence of flows along them suggest that they are thin flux tubes filled with continuous or discontinuous cool material.
This cool material is probably subject to cooling, heating, ionisation, recombination, motions, etc., which, altogether, makes very difficult a proper theoretical treatment. For instance, in the case of the considered thermal mechanisms, up to now only optically thin radiation has been taken into account, while the inclusion of optically thick effects would probably be more realistic; the prominence heating mechanisms taken usually into account are tentative and “ad hoc”, while true prominence heating processes are still deeply unknown. An important step ahead would be to consistently couple radiative transfer with magnetohydrodynamic waves as a mean to establish a relationship between velocity, density, magnetic field and temperature perturbations, and the observed signatures of oscillations like spectral line shift, width and intensity. On the other hand, oscillations have also been studied by producing small perturbations in a background equilibrium with stationary physical properties. However, the stationary assumption is not realistic and the effects produced by a non-stationary background on MHD waves should be studied. Ballester et al. (2016) have made a first step in this direction by studying the effect of the temporal variation of the prominence temperature, produced by an imbalance between heating and cooling processes, on slow MHD waves excited in a plasma with prominence physical properties. However, this issue needs to be explored using more realistic models for prominence configuration as well as for processes that modify in time, or in space, prominence physical properties.
Partial ionisation is another topic of interest for prominence oscillations since, apart from influencing the behaviour of magnetohydrodynamic waves, it poses an important problem for prominence equilibrium models since cross-field diffusion of neutral atoms can give place to flows and drain prominence material. Furthermore, time or space variations of temperature, density, etc. could substantially affect some of the parameters involved in the dissipative terms of the induction equation.
Another issue which still remains a mystery is the triggering mechanism of small amplitude oscillations. In the case of large amplitude oscillations, observations provide with information about the exciting mechanism, but the available observations of small amplitude oscillations show no signature of their exciting mechanism. Are these oscillations of chromospheric or photospheric origin? Are they generated inside prominence magnetic structures by small reconnection events? Are they produced by weak external disturbances coming from far away in the solar atmosphere? Indirect evidence about this topic is given by Hillier et al. (2013), who found that the velocity power spectrum of transverse oscillations in a quiescent prominence is consistent with the power spectrum of horizontal motions of photospheric magnetic elements.
The presence of flows adds another ingredient to be taken into account in the study of prominence oscillations and, up to now, we can only obtain one or two-dimensional information about the flow behaviour. It would be of great interest to collect information about the three-dimensional structure of flows and, probably, in the near future we could acquire this information by means of IRIS (http://iris.lmsal.com/).
The physical changing conditions of prominence plasmas suggest that for an in-depth theoretical study of prominence oscillations more complex models together with numerical simulations are needed. Therefore, and as a step ahead, in the next future numerical studies of the time evolution of magnetohydrodynamic waves in partially ionised flowing inhomogeneous prominence plasmas, subject to different physical processes such as ionisation, recombination, etc., should be undertaken. However, a full three-dimensional dynamical prominence model involving magnetic equilibrium, radiative transfer, etc., whose oscillatory behaviour could be studied seems to be still far away in the future.
Notes
Acknowledgements
The authors acknowledge the financial support received from the MINECO and FEDER funds under Grants Nos. AYA2014-54485-P and AYA2014-55456-P. They also thank R. Soler for producing some of the figures of this review.
Supplementary material
References
- Anderson GF (1967) Transient flare-associated phenomena in the solar atmosphere. PhD thesis, University of Colorado at Boulder, Boulder, COGoogle Scholar
- Andries J, Arregui I, Goossens M (2005) Determination of the coronal density stratification from the observation of harmonic coronal loop oscillations. Astrophys J Lett 624:L57–L60. https://doi.org/10.1086/430347
- Andries J, Arregui I, Goossens M (2009) The influence of longitudinal density variation in coronal loops on the eigenfunctions of kink-oscillation overtones. Astron Astrophys 497:265–272. https://doi.org/10.1051/0004-6361/200811481
- Antolin P, Okamoto TJ, De Pontieu B, Uitenbroek H, Van Doorsselaere T, Yokoyama T (2015) Resonant absorption of transverse oscillations and associated heating in a solar prominence. II. Numerical aspects. Astrophys J 809:72. https://doi.org/10.1088/0004-637X/809/1/72. arXiv:1506.09108
- Anzer U (2009) Global prominence oscillations. Astron Astrophys 497:521–524. https://doi.org/10.1051/0004-6361/200811107
- Anzer U, Heinzel P (2005) On the nature of dark extreme ultraviolet structures seen by SOHO/EIT and TRACE. Astrophys J 622:714–721. https://doi.org/10.1086/427817
- Arregui I, Asensio Ramos A (2014) Determination of the cross-field density structuring in coronal waveguides using the damping of transverse waves. Astron Astrophys 565:A78. https://doi.org/10.1051/0004-6361/201423536. arXiv:1404.0584
- Arregui I, Ballester JL (2011) Damping mechanisms for oscillations in solar prominences. Space Sci Rev 158:169–204. https://doi.org/10.1007/s11214-010-9648-9. arXiv:1002.3489
- Arregui I, Soler R (2015) Model comparison for the density structure along solar prominence threads. Astron Astrophys 578:A130. https://doi.org/10.1051/0004-6361/201525720. arXiv:1505.03448
- Arregui I, Andries J, Van Doorsselaere T, Goossens M, Poedts S (2007) MHD coronal seismology using the period and damping of resonantly damped quasi-mode kink oscillations. Astron Astrophys 463:333–338. https://doi.org/10.1051/0004-6361:20065863
- Arregui I, Terradas J, Oliver R, Ballester JL (2007) Resonantly damped surface and body MHD waves in a solar coronal slab with oblique propagation. Solar Phys 246:213–230. https://doi.org/10.1007/s11207-007-9041-3. arXiv:0708.3783
- Arregui I, Ballester JL, Goossens M (2008a) On the scaling of the damping time for resonantly damped oscillations in coronal loops. Astrophys J Lett 676:L77–L80. https://doi.org/10.1086/587098. arXiv:0802.1143
- Arregui I, Terradas J, Oliver R, Ballester JL (2008b) Damping of fast magnetohydrodynamic oscillations in quiescent filament threads. Astrophys J Lett 682:L141–L144. https://doi.org/10.1086/591081
- Arregui I, Soler R, Ballester JL, Wright AN (2011) Magnetohydrodynamic kink waves in two-dimensional non-uniform prominence threads. Astron Astrophys 533:A60. https://doi.org/10.1051/0004-6361/201117477. arXiv:1011.5175
- Arregui I, Asensio Ramos A, Díaz AJ (2013) Bayesian analysis of multiple harmonic oscillations in the solar corona. Astrophys J Lett 765:L23 arXiv:1302.3393 ADSCrossRefGoogle Scholar
- Arregui I, Ramos AA, Díaz AJ (2014) The promise of Bayesian analysis for prominence seismology. In: Schmieder B, Malherbe JM, Wu ST (eds) Nature of prominences and their role in space weather, Cambridge University Press, Cambridge, IAU Symposium, vol 300, pp 393–394. https://doi.org/10.1017/S1743921313011241
- Arregui I, Soler R, Asensio Ramos A (2015) Model comparison for the density structure across solar coronal waveguides. Astrophys J 811:104. https://doi.org/10.1088/0004-637X/811/2/104 axXiv:1509.02340
- Asai A, Ishii TT, Isobe H, Kitai R, Ichimoto K, UeNo S, Nagata S, Morita S, Nishida K, Shiota D, Oi A, Akioka M, Shibata K (2012) First simultaneous observation of an H\(\alpha \) Moreton wave, EUV wave, and filament/prominence oscillations. Astrophys J Lett 745:L18. https://doi.org/10.1088/2041-8205/745/2/L18. arXiv:1112.5915
- Aschwanden MJ, Fletcher L, Schrijver CJ, Alexander D (1999) Coronal loop oscillations observed with the transition region and coronal explorer. Astrophys J 520:880–894. https://doi.org/10.1086/307502
- Bakhareva NM, Zaitsev VV, Khodachenko ML (1992) Dynamic regimes of prominence evolution. Solar Phys 139:299–314. https://doi.org/10.1007/BF00159156
- Ballai I (2003) On dissipative effects in solar prominences. Astron Astrophys 410:L17–L19. https://doi.org/10.1051/0004-6361:20031401
- Ballester JL (2010) The damping of small-amplitude oscillations in quiescent prominences. Adv Space Res 46:364–376. https://doi.org/10.1016/j.asr.2009.09.015
- Ballester JL, Priest ER (1989) Model for the fibril structure of solar prominences. Astron Astrophys 225:213–221ADSGoogle Scholar
- Ballester JL, Carbonell M, Soler R, Terradas J (2016) Prominence oscillations: effect of a time-dependent background temperature. Astron Astrophys 591:A109. https://doi.org/10.1051/0004-6361/201527953
- Balthasar H, Wiehr E (1994) Temporal and spatial variation of physical parameters in a quiescent prominence. Astron Astrophys 286:639–644ADSGoogle Scholar
- Balthasar H, Knoelker M, Wiehr E, Stellmacher G (1986) Evidence for quasi-periodic Doppler motions in solar prominences. Astron Astrophys 163:343–346ADSGoogle Scholar
- Balthasar H, Wiehr E, Schleicher H, Wohl H (1993) Doppler oscillations in solar prominences simultaneously observed with two telescopes. discovery of a 30 s oscillation. Astron Astrophys 277:635–638ADSGoogle Scholar
- Barceló S, Carbonell M, Ballester JL (2011) Time damping of non-adiabatic magnetohydrodynamic waves in a partially ionised prominence medium: effect of a background flow. Astron Astrophys 525:A60. https://doi.org/10.1051/0004-6361/201015499
- Bashkirtsev VS, Mashnich GP (1984) Oscillatory processes in prominences. Solar Phys 91:93–101. https://doi.org/10.1007/BF00213616
- Bashkirtsev VS, Mashnich GP (1993) Some regularities of velocity oscillations in prominences. Astron Astrophys 279:610–614ADSGoogle Scholar
- Bashkirtsev VS, Kobanov NI, Mashnich GP (1983) The observations of 80-min oscillations in the quiescent prominences. Solar Phys 82:443–445. https://doi.org/10.1007/BF00145584
- Bayes M, Price M (1763) An essay towards Solving a Problem in the Doctrine of Chances. By the Late Rev. Mr. Bayes, F. R. S. Communicated by Mr. Price, in a Letter to John Canton, A. M. F. R. S. Philos Trans R Soc Lond 53:370–418. https://doi.org/10.1098/rstl.1763.0053
- Berger TE, Shine RA, Slater GL, Tarbell TD, Title AM, Okamoto TJ, Ichimoto K, Katsukawa Y, Suematsu Y, Tsuneta S, Lites BW, Shimizu T (2008) Hinode SOT observations of solar quiescent prominence dynamics. Astrophys J Lett 676:L89–L92. https://doi.org/10.1086/587171
- Bernstein IB, Frieman EA, Kruskal MD, Kulsrud RM (1958) An energy principle for hydromagnetic stability problems. Proc R Soc Lond Ser A 244:17–40. https://doi.org/10.1098/rspa.1958.0023
- Bi Y, Jiang Y, Yang J, Hong J, Li H, Yang D, Yang B (2014) Solar filament material oscillations and drainage before eruption. Astrophys J 790:100. https://doi.org/10.1088/0004-637X/790/2/100
- Blanco S, Bocchialini K, Costa A, Domenech G, Rovira M, Vial JC (1999) Multiresolution wavelet analysis of SUMER/SOHO observations in a solar prominence. Solar Phys 186:281–290. https://doi.org/10.1023/A:1005185523486
- Bocchialini K, Baudin F, Koutchmy S, Pouget G, Solomon J (2011) Oscillatory motions observed in eruptive filaments. Astron Astrophys 533:A96. https://doi.org/10.1051/0004-6361/201016342. arXiv:1107.0596
- Bommier V, Leroy JL (1998) Global pattern of the magnetic field vector above neutral lines from 1974 to 1982: Pic-du-Midi observations of prominences. In: Webb DF, Schmieder B, Rust DM (eds) New perspectives on solar prominences, Astronomical Society of the Pacific, San Francisco, ASP Conference Series, vol 150, pp 434–438Google Scholar
- Bommier V, Landi Degl’Innocenti E, Leroy JL, Sahal-Bréchot S (1994) Complete determination of the magnetic field vector and of the electron density in 14 prominences from linear polarization measurements in the HeI D\(_3\) and H\(\alpha \) lines. Solar Phys 154:231–260. https://doi.org/10.1007/BF00681098
- Cally PS (1986) Leaky and non-leaky oscillations in magnetic flux tubes. Solar Phys 103:277–298. https://doi.org/10.1007/BF00147830
- Carbonell M, Oliver R, Ballester JL (2004) Time damping of linear non-adiabatic magnetohydrodynamic waves in an unbounded plasma with solar coronal properties. Astron Astrophys 415:739–750. https://doi.org/10.1051/0004-6361:20034630
- Carbonell M, Terradas J, Oliver R, Ballester JL (2006) Spatial damping of linear non-adiabatic magnetoacoustic waves in a prominence medium. Astron Astrophys 460:573–581. https://doi.org/10.1051/0004-6361:20065528
- Carbonell M, Oliver R, Ballester JL (2009) Time damping of non-adiabatic MHD slow and thermal waves in a prominence medium: effect of a background flow. New Astron 14:277–284. https://doi.org/10.1016/j.newast.2008.09.001
- Carbonell M, Forteza P, Oliver R, Ballester JL (2010) The spatial damping of magnetohydrodynamic waves in a flowing partially ionised prominence plasma. Astron Astrophys 515:A80. https://doi.org/10.1051/0004-6361/200913024. arXiv:1001.4962
- Chen PF, Innes DE, Solanki SK (2008) SOHO/SUMER observations of prominence oscillation before eruption. Astron Astrophys 484:487–493. https://doi.org/10.1051/0004-6361:200809544. arXiv:0802.1961
- Chin R, Verwichte E, Rowlands G, Nakariakov VM (2010) Self-organization of magnetoacoustic waves in a thermally unstable environment. Phys Plasmas 17:032107. https://doi.org/10.1063/1.3314721
- Chitta LP, van Ballegooijen AA, Rouppe van der Voort L, DeLuca EE, Kariyappa R (2012) Dynamics of the solar magnetic bright points derived from their horizontal motions. Astrophys J 752:48. https://doi.org/10.1088/0004-637X/752/1/48. arXiv:1204.4362
- de Jager C (1959) Structure and dynamics of the solar atmosphere. In: Flügge S (ed) Astrophysik 3: Das Sonnensystem, Handbuch der Physik, vol 52. Springer, Berlin, p 80Google Scholar
- De Pontieu B, Martens PCH, Hudson HS (2001) Chromospheric damping of Alfvén waves. Astrophys J 558:859–871. https://doi.org/10.1086/322408
- Díaz AJ, Roberts B (2006) Fast magnetohydrodynamic oscillations in a fibril prominence model. Solar Phys 236:111–126. https://doi.org/10.1007/s11207-006-0137-y
- Díaz AJ, Oliver R, Erdélyi R, Ballester JL (2001) Fast MHD oscillations in prominence fine structures. Astron Astrophys 379:1083–1097. https://doi.org/10.1051/0004-6361:20011351
- Díaz AJ, Oliver R, Ballester JL (2002) Fast magnetohydrodynamic oscillations in cylindrical prominence fibrils. Astrophys J 580:550–565. https://doi.org/10.1086/343039
- Díaz AJ, Oliver R, Ballester JL (2003) Fast MHD oscillations of a 3-dimensional prominence fibril. Astron Astrophys 402:781–789. https://doi.org/10.1051/0004-6361:20030285
- Díaz AJ, Oliver R, Ballester JL (2005) Fast magnetohydrodynamic oscillations in a multifibril Cartesian prominence model. Astron Astrophys 440:1167–1175. https://doi.org/10.1051/0004-6361:20052759
- Díaz AJ, Oliver R, Ballester JL (2010) Prominence thread seismology using the \(P_1/2P_2\) ratio. Astrophys J 725:1742–1748. https://doi.org/10.1088/0004-637X/725/2/1742
- Dungey JW (1953) A family of solutions of the magneto-hydrostatic problem in a conducting atmosphere in a gravitational field. Mon Not R Astron Soc 113:180–187. https://doi.org/10.1093/mnras/113.2.180
- Dymova MV, Ruderman MS (2005) Non-axisymmetric oscillations of thin prominence fibrils. Solar Phys 229:79–94. https://doi.org/10.1007/s11207-005-5002-x
- Edwin PM, Roberts B (1983) Wave propagation in a magnetic cylinder. Solar Phys 88:179–191. https://doi.org/10.1007/BF00196186
- Engvold O (1981) The small scale velocity field of a quiescent prominence. Solar Phys 70:315–324. https://doi.org/10.1007/BF00151336
- Engvold O (1998) Observations of filament structure and dynamics. In: Webb DF, Schmieder B, Rust DM (eds) New perspectives on solar prominences, Astronomical Society of the Pacific, San Francisco, ASP Conference Series, vol 150, pp 23–31Google Scholar
- Engvold O (2008) Observational aspects of prominence oscillations. In: Erdélyi R, Mendoza-Briceño CA (eds) Waves and oscillations in the solar atmosphere: heating and magneto-seismology. Cambridge University Press, Cambridge, IAU Symposia, vol 247, pp 152–157. https://doi.org/10.1017/S1743921308014816
- Eto S, Isobe H, Narukage N, Asai A, Morimoto T, Thompson B, Yashiro S, Wang T, Kitai R, Kurokawa H, Shibata K (2002) Relation between a Moreton wave and an EIT wave observed on 1997 November 4. Publ Astron Soc Jpn 54:481–491. https://doi.org/10.1093/pasj/54.3.481
- Field GB (1965) Thermal instability. Astrophys J 142:531–567. https://doi.org/10.1086/148317
- Forteza P, Oliver R, Ballester JL, Khodachenko ML (2007) Damping of oscillations by ion-neutral collisions in a prominence plasma. Astron Astrophys 461:731–739. https://doi.org/10.1051/0004-6361:20065900
- Forteza P, Oliver R, Ballester JL (2008) Time damping of non-adiabatic MHD waves in an unbounded partially ionised prominence plasma. Astron Astrophys 492:223–231. https://doi.org/10.1051/0004-6361:200810370
- Foullon C, Verwichte E, Nakariakov VM (2004) Detection of ultra-long-period oscillations in an EUV filament. Astron Astrophys 427:L5–L8. https://doi.org/10.1051/0004-6361:200400083
- Foullon C, Verwichte E, Nakariakov VM (2009) Ultra-long-period oscillations in EUV filaments near to eruption: two-wavelength correlation and seismology. Astrophys J 700:1658–1665. https://doi.org/10.1088/0004-637X/700/2/1658
- Galindo Trejo J (1987) Stability analysis of two-dimensional models of quiescent prominences. Solar Phys 108:265–313ADSCrossRefGoogle Scholar
- Galindo Trejo J (1989a) Influence of a non-uniform axial magnetic field on the instability of a quiescent prominence overlying a solar bipolar region. Rev Mex Astron Astrof 17:47–58ADSGoogle Scholar
- Galindo Trejo J (1989b) MHD stability of a filament immersed in a solar bipolar magnetic region. Geophys Astrophys Fluid Dyn 47:69–91. https://doi.org/10.1080/03091928908221817
- Galindo Trejo J (1998) Hydromagnetic stability analysis of a solar prominence suspended in an external horizontal magnetic field. Astron Nachr 319:391–408. https://doi.org/10.1002/asna.2123190608
- Galindo Trejo J (2006) MHD stabiblity of a solar prominence embedded in an external vertical magnetic field. Rev Mex Astron Astrof 42:89–98ADSGoogle Scholar
- Gilbert HR, Daou AG, Young D, Tripathi D, Alexander D (2008) The filament-Moreton wave interaction of 2006 December 6. Astrophys J 685:629–645. https://doi.org/10.1086/590545
- Goossens M (2003) An introduction to plasma astrophysics and magnetohydrodynamics. Astrophysics and Space Science Library, vol 294. Kluwer, Dordrecht. https://doi.org/10.1007/978-94-007-1076-4
- Goossens M (2008) Seismology of kink oscillations in coronal loops: two decades of resonant damping. In: Erdélyi R, Mendoza-Briceño CA (eds) Waves and oscillations in the solar atmosphere: heating and magneto-seismology. Cambridge University Press, Cambridge, IAU Symposium, vol 247, pp 228–242. https://doi.org/10.1017/S1743921308014920
- Goossens M, Hollweg JV, Sakurai T (1992) Resonant behaviour of MHD waves on magnetic flux tubes. III. Effect of equilibrium flow. Solar Phys 138:233–255. https://doi.org/10.1007/BF00151914
- Goossens M, Ruderman MS, Hollweg JV (1995) Dissipative MHD solutions for resonant Alfvén waves in 1-dimensional magnetic flux tubes. Solar Phys 157:75–102. https://doi.org/10.1007/BF00680610
- Goossens M, Andries J, Aschwanden MJ (2002) Coronal loop oscillations: an interpretation in terms of resonant absorption of quasi-mode kink oscillations. Astron Astrophys 394:L39–L42. https://doi.org/10.1051/0004-6361:20021378
- Goossens M, Andries J, Arregui I (2006) Damping of magnetohydrodynamic waves by resonant absorption in the solar atmosphere. Philos Trans R Soc Lond Ser A 364:433–446. https://doi.org/10.1098/rsta.2005.1708
- Goossens M, Arregui I, Ballester JL, Wang TJ (2008) Analytic approximate seismology of transversely oscillating coronal loops. Astron Astrophys 484:851–857. https://doi.org/10.1051/0004-6361:200809728
- Goossens M, Terradas J, Andries J, Arregui I, Ballester JL (2009) On the nature of kink MHD waves in magnetic flux tubes. Astron Astrophys 503:213–223. https://doi.org/10.1051/0004-6361/200912399. arXiv:0905.0425
- Goossens M, Erdélyi R, Ruderman MS (2010) Resonant MHD waves in the solar atmosphere. Space Sci Rev. https://doi.org/10.1007/s11214-010-9702-7
- Gosain S, Foullon C (2012) Dual trigger of transverse oscillations in a prominence by EUV fast and slow coronal waves: SDO/AIA and STEREO/EUVI observations. Astrophys J 761:103. https://doi.org/10.1088/0004-637X/761/2/103. arXiv:1210.6690
- Gouttebroze P, Labrosse N (2009) Radiative transfer in cylindrical threads with incident radiation. VI. A hydrogen plus helium system. Astron Astrophys 503:663–671. https://doi.org/10.1051/0004-6361/200811483. arXiv:0905.3466
- Gregory PC (2005) Bayesian logical data analysis for the physical sciences: a comparative approach with ‘Mathematica’ support. Cambridge University Press, CambridgeCrossRefGoogle Scholar
- Harvey JW (1969) Magnetic fields associated with solar active-region prominences. PhD thesis, University of Colorado at Boulder, Boulder, COGoogle Scholar
- Heinzel P (1995) Multilevel NLTE radiative transfer in isolated atmospheric structures: implementation of the MALI-technique. Astron Astrophys 299:563ADSGoogle Scholar
- Heinzel P, Anzer U (2006) On the fine structure of solar filaments. Astrophys J Lett 643:L65–L68. https://doi.org/10.1086/504980
- Heinzel P, Zapiór M, Oliver R, Ballester JL (2014) Synthetic hydrogen spectra of prominence oscillations. Astron Astrophys 562:A103. https://doi.org/10.1051/0004-6361/201322346. arXiv:1401.2131
- Hershaw J, Foullon C, Nakariakov VM, Verwichte E (2011) Damped large amplitude transverse oscillations in an EUV solar filament, triggered by large-scale transient coronal waves. Astron Astrophys 531:A53. https://doi.org/10.1051/0004-6361/201116750
- Hillier A, Morton RJ, Erdélyi R (2013) A statistical study of transverse oscillations in a quiescent prominence. Astrophys J Lett 779:L16. https://doi.org/10.1088/2041-8205/779/2/L16. arXiv:1310.8009
- Hollweg JV, Yang G (1988) Resonance absorption of compressible magnetohydrodynamic waves at thin ‘surfaces’. J Geophys Res 93:5423–5436. https://doi.org/10.1029/JA093iA06p05423
- Hyder CL (1966) Winking filaments and prominence and coronal magnetic fields. Z Astrophys 63:78–84ADSGoogle Scholar
- Ionson JA (1978) Resonant absorption of Alfvénic surface waves and the heating of solar coronal loops. Astrophys J 226:650–673. https://doi.org/10.1086/156648
- Isobe H, Tripathi D (2006) Large amplitude oscillation of a polar crown filament in the pre-eruption phase. Astron Astrophys 449:L17–L20. https://doi.org/10.1051/0004-6361:20064942. arXiv:astro-ph/0602432
- Isobe H, Tripathi D, Asai A, Jain R (2007) Large-amplitude oscillation of an erupting filament as seen in EUV, H\(\alpha \), and microwave observations. Solar Phys 246:89–99. https://doi.org/10.1007/s11207-007-9091-6. arXiv:0711.3952
- James SP, Erdélyi R, De Pontieu B (2003) Can ion-neutral damping help to form spicules? Astron Astrophys 406:715–724. https://doi.org/10.1051/0004-6361:20030685
- Jing J, Lee J, Spirock TJ, Xu Y, Wang H, Choe GS (2003) Periodic motion along a solar filament initiated by a subflare. Astrophys J Lett 584:L103–L106. https://doi.org/10.1086/373886
- Jing J, Lee J, Spirock TJ, Wang H (2006) Periodic motion along solar filaments. Solar Phys 236:97–109. https://doi.org/10.1007/s11207-006-0126-1
- Joarder PS, Roberts B (1992a) The modes of oscillation of a prominence. I. The slab with longitudinal magnetic field. Astron Astrophys 256:264–272ADSGoogle Scholar
- Joarder PS, Roberts B (1992b) The modes of oscillation of a prominence. II. The slab with transverse magnetic field. Astron Astrophys 261:625–632ADSGoogle Scholar
- Joarder PS, Roberts B (1993a) The modes of oscillation of a Menzel prominence. Astron Astrophys 273:642–646ADSGoogle Scholar
- Joarder PS, Roberts B (1993b) The modes of oscillation of a prominence. III. The slab in a skewed magnetic field. Astron Astrophys 277:225–234ADSGoogle Scholar
- Joarder PS, Nakariakov VM, Roberts B (1997) Oscillations in prominence fine-structures. Solar Phys 173:81–101. https://doi.org/10.1023/A:1004917710650
- Joshi AD, Hanaoka Y, Suematsu Y, Morita S, Yurchyshyn V, Cho KS (2016) Pre-eruption oscillations in thin and long features in a quiescent filament. Astrophys J 833:243. https://doi.org/10.3847/1538-4357/833/2/243. arXiv:1612.04917
- Kass RE, Raftery AE (1995) Bayes factors. J Am Stat Assoc 90:773. https://doi.org/10.1080/01621459.1995.10476572
- Khodachenko ML, Arber TD, Rucker HO, Hanslmeier A (2004) Collisional and viscous damping of MHD waves in partially ionized plasmas of the solar atmosphere. Astron Astrophys 422:1073–1084. https://doi.org/10.1051/0004-6361:20034207
- Kippenhahn R, Schlüter A (1957) Eine Theorie der solaren Filamente. Z Astrophys 43:36–62ADSzbMATHGoogle Scholar
- Kleczek J, Kuperus M (1969) Oscillatory phenomena in quiescent prominences. Solar Phys 6:72–79. https://doi.org/10.1007/BF00146797
- Kolotkov DY, Nisticò G, Nakariakov VM (2016) Transverse oscillations and stability of prominences in a magnetic field dip. Astron Astrophys 590:A120. https://doi.org/10.1051/0004-6361/201628501
- Kuperus M, Raadu MA (1974) The support of prominences formed in neutral sheets. Astron Astrophys 31:189–193ADSGoogle Scholar
- Kuperus M, Tandberg-Hanssen E (1967) The nature of quiescent solar prominences. Solar Phys 2:39–48. https://doi.org/10.1007/BF00155891
- Labrosse N, Heinzel P, Vial JC, Kucera T, Parenti S, Gunár S, Schmieder B, Kilper G (2010) Physics of solar prominences: I—spectral diagnostics and non-LTE modelling. Space Sci Rev 151:243–332. https://doi.org/10.1007/s11214-010-9630-6. arXiv:1001.1620
- Landman DA, Edberg SJ, Laney CD (1977) Measurements of H\(\beta \), He D\(_3\), and Ca\(^+\) \(\lambda \)8542 line emission in quiescent prominences. Astrophys J 218:888–897. https://doi.org/10.1086/155744
- Leake JE, Arber TD, Khodachenko ML (2005) Collisional dissipation of Alfvén waves in a partially ionised solar chromosphere. Astron Astrophys 442:1091–1098. https://doi.org/10.1051/0004-6361:20053427. arXiv:astro-ph/0510265
- Lerche I, Low BC (1980) On the equilibrium of a cylindrical plasma supported horizontally by magnetic fields in uniform gravity. Solar Phys 67:229–243. https://doi.org/10.1007/BF00149804
- Leroy JL (1980) Mass balance and magnetic structure in quiescent prominences. In: Moriyama F, Henoux JC (eds) Proceedings of the Japan–France seminar on solar physics, Nihon Gakujutsu Shinkokai and CNRS, Tokyo, p 155Google Scholar
- Leroy JL (1988) Observations of prominence magnetic field. In: Ballester JL, Priest ER (eds) Dynamics and structure of solar prominences, Universitat de les Illes Balears, Palma de Mallorca, Conferències i comunicacions, vol 5, pp 33–40Google Scholar
- Leroy JL (1989) Observation of prominence magnetic fields. In: Priest ER (ed) Dynamics and structure of quiescent solar prominences, Astrophysics and Space Science Library, vol 150. Kluwer, Dordrecht, pp 77–113Google Scholar
- Li L, Zhang J (2013) The evolution of barbs of a polar crown filament observed by SDO. Solar Phys 282:147–174. https://doi.org/10.1007/s11207-012-0122-6
- Li T, Zhang J (2012) SDO/AIA observations of large-amplitude longitudinal oscillations in a solar filament. Astrophys J Lett 760:L10. https://doi.org/10.1088/2041-8205/760/1/L10. arXiv:1210.5110
- Lin Y (2005) Magnetic field topology inferred from studies of fine threads in solar filaments. PhD thesis, University of Oslo, OsloGoogle Scholar
- Lin Y (2011) Filament thread-like structures and their small-amplitude oscillations. Space Sci Rev 158:237–266. https://doi.org/10.1007/s11214-010-9672-9
- Lin Y, Engvold OR, Wiik JE (2003) Counterstreaming in a large polar crown filament. Solar Phys 216:109–120. https://doi.org/10.1023/A:1026150809598
- Lin Y, Engvold O, Rouppe van der Voort LHM, Wiik JE, Berger TE (2005) Thin threads of solar filaments. Solar Phys 226:239–254. https://doi.org/10.1007/s11207-005-6876-3
- Lin Y, Engvold O, Rouppe van der Voort LHM, van Noort MJ (2007) Evidence of traveling waves in filament threads. Solar Phys 246:65–72. https://doi.org/10.1007/s11207-007-0402-8
- Lin Y, Martin SF, Engvold O (2008) Filament substructures and their interrelation. In: Howe R, Komm RW, Balasubramaniam KS, Petrie GJD (eds) Subsurface and atmospheric influences on solar activity, ASP Conference Series, vol 383. Astronomical Society of the Pacific, San Francisco, pp 235–242Google Scholar
- Lin Y, Soler R, Engvold O, Ballester JL, Langangen Ø, Oliver R, Rouppe van der Voort LHM (2009) Swaying threads of a solar filament. Astrophys J 704:870–876. https://doi.org/10.1088/0004-637X/704/1/870
- Liu W, Ofman L, Nitta NV, Aschwanden MJ, Schrijver CJ, Title AM, Tarbell TD (2012) Quasi-periodic fast-mode wave trains within a global EUV wave and sequential transverse oscillations detected by SDO/AIA. Astrophys J 753:52. https://doi.org/10.1088/0004-637X/753/1/52. arXiv:1204.5470
- Low BC (1981) The field and plasma configuration of a filament overlying a solar bipolar magnetic region. Astrophys J 246:538–548. https://doi.org/10.1086/158954
- Luna M, Karpen J (2012) Large-amplitude longitudinal oscillations in a solar filament. Astrophys J Lett 750:L1. https://doi.org/10.1088/2041-8205/750/1/L1. arXiv:1203.5027
- Luna M, Terradas J, Oliver R, Ballester JL (2008) Transverse oscillations of two coronal loops. Astrophys J 676:717–727. https://doi.org/10.1086/528367. arXiv:0707.0758
- Luna M, Díaz AJ, Karpen J (2012a) The effects of magnetic-field geometry on longitudinal oscillations of solar prominences. Astrophys J 757:98. https://doi.org/10.1088/0004-637X/757/1/98. arXiv:1207.6358
- Luna M, Karpen JT, DeVore CR (2012b) Formation and evolution of a multi-threaded solar prominence. Astrophys J 746:30. https://doi.org/10.1088/0004-637X/746/1/30. arXiv:1201.3559
- Luna M, Knizhnik K, Muglach K, Karpen J, Gilbert H, Kucera TA, Uritsky V (2014) Observations and implications of large-amplitude longitudinal oscillations in a solar filament. Astrophys J 785:79. https://doi.org/10.1088/0004-637X/785/1/79. arXiv:1403.0381
- Luna M, Díaz AJ, Oliver R, Terradas J, Karpen J (2016a) The effects of magnetic-field geometry on longitudinal oscillations of solar prominences: cross-sectional area variation for thin tubes. Astron Astrophys 593:A64. https://doi.org/10.1051/0004-6361/201628845. arXiv:1607.02996
- Luna M, Terradas J, Khomenko E, Collados M, de Vicente A (2016b) On the robustness of the pendulum model for large-amplitude longitudinal oscillations in prominences. Astrophys J 817:157. https://doi.org/10.3847/0004-637X/817/2/157. arXiv:1512.05125
- Mackay DH, Karpen JT, Ballester JL, Schmieder B, Aulanier G (2010) Physics of solar prominences: II—magnetic structure and dynamics. Space Sci Rev 151:333–399. https://doi.org/10.1007/s11214-010-9628-0. arXiv:1001.1635
- Malherbe JM, Schmieder B, Mein P (1981) Dynamics in the filaments. I. Oscillations in a quiescent filament. Astron Astrophys 102:124–128ADSGoogle Scholar
- Malherbe JM, Schmieder B, Mein P, Tandberg-Hanssen E (1987) Dynamics of solar filaments. V. Oscillations in the H\(\alpha \) and 1548 Å C iv lines. Astron Astrophys 172:316–322ADSGoogle Scholar
- Malville JM, Schindler M (1981) Oscillations of a loop prominence preceding a limb flare. Solar Phys 70:115–128. https://doi.org/10.1007/BF00154395
- Martin SF, Lin Y, Engvold O (2008) A method of resolving the 180-degree ambiguity by employing the chirality of solar features. Solar Phys 250:31–51. https://doi.org/10.1007/s11207-008-9194-8
- Mashnich GP, Bashkirtsev VS (1990) Observations of Doppler velocity oscillations of mass motion in a quiescent prominence during three consecutive days. Astron Astrophys 235:428–430ADSGoogle Scholar
- Mashnich GP, Bashkirtsev VS (1999) Latitudinal variations of line-of-sight velocity oscillations in the photosphere, chromosphere and prominences. Solar Phys 185:35–40. https://doi.org/10.1023/A:1005166214261
- Mashnich GP, Bashkirtsev VS, Khlystova AI (2009a) Spatial distribution of oscillations in filaments. Geomagn Aeron 49:891–897. https://doi.org/10.1134/S0016793209070111
- Mashnich GP, Bashkirtsev VS, Khlystova AI (2009b) Velocity structure and variations in the region of quiet solar filaments. Astron Lett 35:253–260. https://doi.org/10.1134/S1063773709040057
- Mashnich GP, Bashkirtsev VS, Khlystova AI (2012) Small-amplitude oscillations in solar filaments. Astron Rep 56:241–249. https://doi.org/10.1134/S1063772912030055
- Matsumoto T, Kitai R (2010) Temporal power spectra of the horizontal velocity of the solar photosphere. Astrophys J Lett 716:L19–L22. https://doi.org/10.1088/2041-8205/716/1/L19. arXiv:1004.5173
- McDougall AMD, Hood AW (2007) A new look at mode conversion in a stratified isothermal atmosphere. Solar Phys 246:259–271. https://doi.org/10.1007/s11207-007-0393-5. arXiv:0707.0830
- McLaughlin JA, Hood AW (2006) MHD mode coupling in the neighbourhood of a 2D null point. Astron Astrophys 459:641–649. https://doi.org/10.1051/0004-6361:20065558. arXiv:0712.2402
- Menzel DH (1951) Solar electromagnetism. In: The dynamics of ionised media, UCL, London. http://discovery.ucl.ac.uk/14698/
- Molowny-Horas R, Oliver R, Ballester JL, Baudin F (1997) Observations of Doppler oscillations in a solar prominence. Solar Phys 172:181–188. https://doi.org/10.1023/A:1004922809950
- Molowny-Horas R, Baudin F, Oliver R, Ballester JL (1998) He i 10830 Å Doppler oscillations in a solar filament. In: Donahue RA, Bookbinder JA (eds) Cool stars, stellar systems, and the sun, Astronomical Society of the Pacific, San Francisco, ASP Conference Series, vol 154, pp 650–657Google Scholar
- Molowny-Horas R, Wiehr E, Balthasar H, Oliver R, Ballester JL (1999) Prominence Doppler oscillations. In: Antalová A, Balthasar H, Kučera A (eds) JOSO annual report 1998, Astronomical Institute of Slovak Academy of Sciences, Tatranská Lomnica, Slovakia, pp 126–127. http://www.joso-info.org/JOSO_PROJEKT/annual/annual90.htm
- Moreton GE, Ramsey HE (1960) Recent observations of dynamical phenomena associated with solar flares. Publ Astron Soc Pac 72:357–358. https://doi.org/10.1086/127549
- Murawski K (1993) Cross-talk in solar coronal loops. Acta Astron 43:161–176ADSGoogle Scholar
- Nakariakov VM, Ofman L (2001) Determination of the coronal magnetic field by coronal loop oscillations. Astron Astrophys 372:L53–L56. https://doi.org/10.1051/0004-6361:20010607
- Nakariakov VM, Verwichte E (2005) Coronal waves and oscillations. Living Rev Sol Phys 2:lrsp-2005-3. https://doi.org/10.12942/lrsp-2005-3
- Nakariakov VM, Ofman L, DeLuca EE, Roberts B, Davila JM (1999) TRACE observations of damped coronal loop oscillations: implications for coronal heating. Science 285:862–864. https://doi.org/10.1126/science.285.5429.862
- Ning Z, Cao W, Goode PR (2009a) Behavior of the spines in a quiescent prominence observed by Hinode/SOT. Astrophys J 707:1124–1130. https://doi.org/10.1088/0004-637X/707/2/1124
- Ning Z, Cao W, Okamoto TJ, Ichimoto K, Qu ZQ (2009b) Small-scale oscillations in a quiescent prominence observed by HINODE/SOT: prominence oscillations. Astron Astrophys 499:595–600. https://doi.org/10.1051/0004-6361/200810853
- Ofman L, Aschwanden MJ (2002) Damping time scaling of coronal loop oscillations deduced from transition region and coronal explorer observations. Astrophys J Lett 576:L153–L156. https://doi.org/10.1086/343886
- Ofman L, Knizhnik K, Kucera T, Schmieder B (2015) Nonlinear MHD waves in a prominence foot. Astrophys J 813:124. https://doi.org/10.1088/0004-637X/813/2/124. arXiv:1509.07911
- Okamoto TJ, Nakai H, Keiyama A, Narukage N, UeNo S, Kitai R, Kurokawa H, Shibata K (2004) Filament oscillations and Moreton waves associated with EIT waves. Astrophys J 608:1124–1132. https://doi.org/10.1086/420838
- Okamoto TJ, Tsuneta S, Berger TE, Ichimoto K, Katsukawa Y, Lites BW, Nagata S, Shibata K, Shimizu T, Shine RA, Suematsu Y, Tarbell TD, Title AM (2007) Coronal transverse magnetohydrodynamic waves in a solar prominence. Science 318:1577–1580. https://doi.org/10.1126/science.1145447
- Okamoto TJ, Antolin P, De Pontieu B, Uitenbroek H, Van Doorsselaere T, Yokoyama T (2015) Resonant absorption of transverse oscillations and associated heating in a solar prominence. I. Observational aspects. Astrophys J 809:71. https://doi.org/10.1088/0004-637X/809/1/71. arXiv:1506.08965
- Oliver R (1999) Prominence oscillations: observations and theory. In: Wilson A et al (eds) Magnetic fields and solar processes, ESA Special Publication, vol 448. ESA, Noordwijk, p 425Google Scholar
- Oliver R (2009) Prominence seismology using small amplitude oscillations. Space Sci Rev 149:175–197. https://doi.org/10.1007/s11214-009-9527-4
- Oliver R, Ballester JL (1995) Magnetohydrodynamic waves in a bounded inhomogeneous medium with prominence–corona properties. Astrophys J 448:444–458. https://doi.org/10.1086/175975
- Oliver R, Ballester JL (1996) The influence of the temperature profile on the magnetohydrodynamic modes of a prominence-corona system. Astrophys J 456:393–398. https://doi.org/10.1086/176661
- Oliver R, Ballester JL (2002) Oscillations in quiescent solar prominences observations and theory (invited review). Solar Phys 206:45–67. https://doi.org/10.1023/A:1014915428440
- Oliver R, Ballester JL, Hood AW, Priest ER (1992) Magnetohydrodynamic waves in a solar prominence. Astrophys J 400:369–379. https://doi.org/10.1086/172003
- Oliver R, Ballester JL, Hood AW, Priest ER (1993) Oscillations of a quiescent solar prominence embedded in a hot corona. Astrophys J 409:809–821. https://doi.org/10.1086/172711
- van den Oord GHJ, Kuperus M (1992) The effect of retardation on the stability of current filaments. Solar Phys 142:113–129. https://doi.org/10.1007/BF00156636
- van den Oord GHJ, Schutgens NAJ, Kuperus M (1998) The effect of delays on filament oscillations and stability. Astron Astrophys 339:225–238ADSGoogle Scholar
- Osherovich VA (1985) Solar prominence model based on eigenvalue solutions. I. Isolated filaments and their properties under the influence of external horizontal magnetic field. Astrophys J 297:314–323. https://doi.org/10.1086/163530
- Osherovich VA (1989) Solar prominence model based on eigenvalue solutions. II. Filaments in the vertical magnetic fields. Astrophys J 336:1041–1049. https://doi.org/10.1086/167073
- Pandey BP, Wardle M (2008) Hall magnetohydrodynamics of partially ionized plasmas. Mon Not R Astron Soc 385:2269–2278. https://doi.org/10.1111/j.1365-2966.2008.12998.x. arXiv:0707.2688
- Pant V, Srivastava AK, Banerjee D, Goossens M, Chen PF, Joshi NC, Zhou YH (2015) MHD seismology of a loop-like filament tube by observed kink waves. Res Astron Astrophys 15:1713. https://doi.org/10.1088/1674-4527/15/10/008. arXiv:1503.02281
- Patsourakos S, Vial JC (2002) SOHO contribution to prominence science. Solar Phys 208:253–281. https://doi.org/10.1023/A:1020510120772
- Pintér B, Jain R, Tripathi D, Isobe H (2008) Prominence seismology: wavelet analysis of filament oscillations. Astrophys J 680:1560–1568. https://doi.org/10.1086/588273
- Poland A, Anzer U (1971) Energy balance in cool quiescent prominences. Solar Phys 19:401–413. https://doi.org/10.1007/BF00146067
- Pouget G (2007) Analyse des protubérances solaires observées à partir de la sonde solaire SOHO et du télescope Sacramento Peak: Oscillations, diagnostic, instabilités. PhD thesis, Université de Paris-Sud, ParisGoogle Scholar
- Pouget G, Bocchialini K, Solomon J (2006) Oscillations in a solar filament: first observation of long periods in the He i 584.33 Å line, modelling and diagnostic. Astron Astrophys 450:1189–1198. https://doi.org/10.1051/0004-6361:20053886
- Ramsey H, Smith SF (1965) Flare-initiated filament oscillations. Astron J 70:688. https://doi.org/10.1086/109569
- Ramsey HE, Smith SF (1966) Flare-initiated filament oscillations. Astron J 71:197–199. https://doi.org/10.1086/109903
- Régnier S, Solomon J, Vial JC (2001) Oscillations in an active region filament: observations and comparison with MHD waves. Astron Astrophys 376:292–301. https://doi.org/10.1051/0004-6361:20010972
- Rempel M, Schmitt D, Glatzel W (1999) Stability of a flux tube model for prominences. Astron Astrophys 343:615–623ADSGoogle Scholar
- Roberts B (1991) Waves in the solar atmosphere. Geophys Astrophys Fluid Dyn 62:83–100. https://doi.org/10.1080/03091929108229127
- Roberts B, Joarder PS (1994) Oscillations in quiescent prominences. In: Belvedere G, Rodono M, Simnett GM (eds) Advances in solar physics. Lecture Notes in Physics, vol 432. Springer, Berlin, pp 173–178. https://doi.org/10.1007/3-540-58041-7_215
- Roberts B, Edwin PM, Benz AO (1984) On coronal oscillations. Astrophys J 279:857–865. https://doi.org/10.1086/161956
- Robertson D, Ruderman MS (2011) Resonantly damped oscillations of two coronal loops. Astron Astrophys 525:A4. https://doi.org/10.1051/0004-6361/201015525
- Ruderman MS, Luna M (2016) Damping of prominence longitudinal oscillations due to mass accretion. Astron Astrophys 591:A131. https://doi.org/10.1051/0004-6361/201628713. arXiv:1605.03376
- Ruderman MS, Roberts B (2002) The damping of coronal loop oscillations. Astrophys J 577:475–486. https://doi.org/10.1086/342130
- Sakai J, Colin A, Priest E (1987) Dynamical model of prominence formation and oscillation. Solar Phys 114:253–271. https://doi.org/10.1007/BF00167345
- Schmieder B, Kucera TA, Knizhnik K, Luna M, Lopez-Ariste A, Toot D (2013) Propagating waves transverse to the magnetic field in a solar prominence. Astrophys J 777:108. https://doi.org/10.1088/0004-637X/777/2/108. arXiv:1309.1568
- Schutgens NAJ (1997a) Prominence oscillations and stability: communicating the distant photospheric boundary. Astron Astrophys 323:969–985ADSGoogle Scholar
- Schutgens NAJ (1997b) Vertical prominence oscillations and stability: a comparison of the influence of the distant photosphere in inverse polarity and normal polarity prominence models. Astron Astrophys 325:352–359ADSGoogle Scholar
- Schutgens NAJ, Tóth G (1999) Numerical simulation of prominence oscillations. Astron Astrophys 345:1038–1048 arXiv:astro-ph/9903128 ADSGoogle Scholar
- Shen Y, Ichimoto K, Ishii TT, Tian Z, Zhao R, Shibata K (2014a) A chain of winking (oscillating) filaments triggered by an invisible extreme-ultraviolet wave. Astrophys J 786:151. https://doi.org/10.1088/0004-637X/786/2/151. arXiv:1403.7705
- Shen Y, Liu YD, Chen PF, Ichimoto K (2014b) Simultaneous transverse oscillations of a prominence and a filament and longitudinal oscillation of another filament induced by a single shock wave. Astrophys J 795:130. https://doi.org/10.1088/0004-637X/795/2/130. arXiv:1409.1304
- Soler R, Goossens M (2011) Kink oscillations of flowing threads in solar prominences. Astron Astrophys 531:A167. https://doi.org/10.1051/0004-6361/201116536. arXiv:1106.3937
- Soler R, Oliver R, Ballester JL (2007) The effect of the solar corona on the attenuation of small-amplitude prominence oscillations. I. Longitudinal magnetic field. Astron Astrophys 471:1023–1033. https://doi.org/10.1051/0004-6361:20077633. arXiv:0704.1566
- Soler R, Oliver R, Ballester JL (2008) Nonadiabatic magnetohydrodynamic waves in a cylindrical prominence thread with mass flow. Astrophys J 684:725–735. https://doi.org/10.1086/590244. arXiv:0803.2600
- Soler R, Oliver R, Ballester JL (2009a) Attenuation of small-amplitude oscillations in a prominence corona model with a transverse magnetic field. New Astron 14:238–248. https://doi.org/10.1016/j.newast.2008.08.008. arXiv:0801.3744
- Soler R, Oliver R, Ballester JL (2009b) Magnetohydrodynamic waves in a partially ionized filament thread. Astrophys J 699:1553–1562. https://doi.org/10.1088/0004-637X/699/2/1553. arXiv:0904.3013
- Soler R, Oliver R, Ballester JL (2009c) Propagation of nonadiabatic magnetoacoustic waves in a threaded prominence with mass flows. Astrophys J 693:1601–1609. https://doi.org/10.1088/0004-637X/693/2/1601. arXiv:0809.4765
- Soler R, Oliver R, Ballester JL (2009d) Resonantly damped kink magnetohydrodynamic waves in a partially ionized filament thread. Astrophys J 707:662–670. https://doi.org/10.1088/0004-637X/707/1/662. arXiv:0909.3599
- Soler R, Oliver R, Ballester JL, Goossens M (2009e) Damping of filament thread oscillations: effect of the slow continuum. Astrophys J Lett 695:L166–L170. https://doi.org/10.1088/0004-637X/695/2/L166. arXiv:0902.0572
- Soler R, Arregui I, Oliver R, Ballester JL (2010a) Seismology of standing kink oscillations of solar prominence fine structures. Astrophys J 722:1778–1792. https://doi.org/10.1088/0004-637X/722/2/1778. arXiv:1007.1959
- Soler R, Oliver R, Ballester JL (2010b) Time damping of non-adiabatic magnetohydrodynamic waves in a partially ionized prominence plasma: effect of helium. Astron Astrophys 512:A28. https://doi.org/10.1051/0004-6361/200913478. arXiv:0910.2883
- Soler R, Oliver R, Ballester JL (2011) Spatial damping of propagating kink waves in prominence threads. Astrophys J 726:102. https://doi.org/10.1088/0004-637X/726/2/102. arXiv:1009.4871
- Soler R, Ruderman MS, Goossens M (2012) Damped kink oscillations of flowing prominence threads. Astron Astrophys 546:A82. https://doi.org/10.1051/0004-6361/201220111. arXiv:1209.3382
- Soler R, Goossens M, Ballester JL (2015) Prominence seismology using the period ratio of transverse thread oscillations. Astron Astrophys 575:A123. https://doi.org/10.1051/0004-6361/201424205. arXiv:1501.05238
- Spruit HC (1982) Propagation speeds and acoustic damping of waves in magnetic flux tubes. Solar Phys 75:3–17. https://doi.org/10.1007/BF00153456
- Suematsu Y, Yoshinaga R, Terao N, Tsubaki T (1990) Oscillatory and transient features detected simultaneously in the Ca ii K and H\(\beta \) line spectra of a quiescent prominence. Publ Astron Soc Jpn 42:187–203ADSGoogle Scholar
- Suetterlin P, Wiehr E, Bianda M, Kueveler G (1997) Problems in measuring prominence oscillations. Astron Astrophys 321:921–926ADSGoogle Scholar
- Takahashi T, Asai A, Shibata K (2015) Prominence activation by coronal fast mode shock. Astrophys J 801:37. https://doi.org/10.1088/0004-637X/801/1/37. arXiv:1501.01592
- Tandberg-Hanssen E (1995) The nature of solar prominences, Astrophysics and Space Science Library, vol 199. Kluwer, Dordrecht. https://doi.org/10.1007/978-94-017-3396-0
- Terradas J, Oliver R, Ballester JL (2001) Radiative damping of quiescent prominence oscillations. Astron Astrophys 378:635–652. https://doi.org/10.1051/0004-6361:20011148
- Terradas J, Molowny-Horas R, Wiehr E, Balthasar H, Oliver R, Ballester JL (2002) Two-dimensional distribution of oscillations in a quiescent solar prominence. Astron Astrophys 393:637–647. https://doi.org/10.1051/0004-6361:20020967
- Terradas J, Carbonell M, Oliver R, Ballester JL (2005) Time damping of linear non-adiabatic magnetoacoustic waves in a slab-like quiescent prominence. Astron Astrophys 434:741–749. https://doi.org/10.1051/0004-6361:20041984
- Terradas J, Arregui I, Oliver R, Ballester JL (2008) Transverse oscillations of flowing prominence threads observed with Hinode. Astrophys J Lett 678:L153–L156. https://doi.org/10.1086/588728
- Terradas J, Arregui I, Oliver R, Ballester JL, Andries J, Goossens M (2008) Resonant absorption in complicated plasma configurations: applications to multistranded coronal loop oscillations. Astrophys J 679:1611–1620. https://doi.org/10.1086/586733. arXiv:0802.0591
- Terradas J, Goossens M, Verth G (2010) Selective spatial damping of propagating kink waves due to resonant absorption. Astron Astrophys 524:A23. https://doi.org/10.1051/0004-6361/201014845. arXiv:1004.4468
- Terradas J, Soler R, Díaz AJ, Oliver R, Ballester JL (2013) Magnetohydrodynamic waves in two-dimensional prominences embedded in coronal arcades. Astrophys J 778:49. https://doi.org/10.1088/0004-637X/778/1/49. arXiv:1309.4934
- Terradas J, Soler R, Luna M, Oliver R, Ballester JL, Wright AN (2016) Solar prominences embedded in flux ropes: morphological features and dynamics from 3D MHD simulations. Astrophys J 820:125. https://doi.org/10.3847/0004-637X/820/2/125. arXiv:1512.07096
- Thompson WT, Schmieder B (1991) Oscillations in H\(\alpha \) filaments: center-to-limb study. Astron Astrophys 243:501–511ADSGoogle Scholar
- Titov VS, Démoulin P (1999) Basic topology of twisted magnetic configurations in solar flares. Astron Astrophys 351:707–720ADSGoogle Scholar
- Tripathi D, Isobe H, Jain R (2009) Large amplitude oscillations in prominences. Space Sci Rev 149:283–298. https://doi.org/10.1007/s11214-009-9583-9. arXiv:0910.4059
- Tsubaki T, Takeuchi A (1986) Periodic oscillations found in the velocity field of a quiescent prominence. Solar Phys 104:313–320. https://doi.org/10.1007/BF00159084
- Tsubaki T, Ohnishi Y, Suematsu Y (1987) Short-period oscillations found in a quiescent prominence. Publ Astron Soc Jpn 39:179–188ADSGoogle Scholar
- Tsubaki T, Toyoda M, Suematsu Y, Gamboa GAR (1988) New evidence for oscillatory motions in a quiescent prominence. Publ Astron Soc Jpn 40:121–126ADSGoogle Scholar
- Uchida Y (1970) Diagnosis of coronal magnetic structure by flare-associated hydromagnetic disturbances. Publ Astron Soc Jpn 22:341–364ADSGoogle Scholar
- Van Doorsselaere T, Nakariakov VM, Verwichte E (2008a) Detection of waves in the solar corona: Kink or Alfvén? Astrophys J Lett 676:L73–L75. https://doi.org/10.1086/587029
- Van Doorsselaere T, Ruderman MS, Robertson D (2008b) Transverse oscillations of two parallel coronal loops. Astron Astrophys 485:849–857. https://doi.org/10.1051/0004-6361:200809841
- Van Doorsselaere T, Wardle N, Del Zanna G, Jansari K, Verwichte E, Nakariakov VM (2011) The first measurement of the adiabatic index in the solar corona using time-dependent spectroscopy of Hinode/EIS observations. Astrophys J Lett 727:L32. https://doi.org/10.1088/2041-8205/727/2/L32
- Verth G, Erdélyi R, Jess DB (2008) Refined magnetoseismological technique for the solar corona. Astrophys J Lett 687:L45–L48. https://doi.org/10.1086/593184
- Verwichte E, Nakariakov VM, Ofman L, Deluca EE (2004) Characteristics of transverse oscillations in a coronal loop arcade. Solar Phys 223:77–94. https://doi.org/10.1007/s11207-004-0807-6
- Verwichte E, Foullon C, Nakariakov VM (2006) Seismology of curved coronal loops with vertically polarised transverse oscillations. Astron Astrophys 452:615–622. https://doi.org/10.1051/0004-6361:20054437
- von Toussaint U (2011) Bayesian inference in physics. Rev Mod Phys 83:943–999. https://doi.org/10.1103/RevModPhys.83.943
- Vršnak B, Veronig AM, Thalmann JK, Žic T (2007) Large amplitude oscillatory motion along a solar filament. Astron Astrophys 471:295–299. https://doi.org/10.1051/0004-6361:20077668. arXiv:0707.1752
- Vršnak B (1993) Classification of prominence oscillations. Hvar Obs Bull 17:23ADSGoogle Scholar
- Wiehr E, Balthasar H, Stellmacher G (1984) Oscillations of the H\(\alpha \) emission in solar prominences. Solar Phys 94:285–288. https://doi.org/10.1007/BF00151318
- Wiehr E, Balthasar H, Stellmacher G (1989) Doppler velocity oscillations in quiescent prominences. Hvar Obs Bull 13:131–135ADSGoogle Scholar
- Xia C, Chen PF, Keppens R, van Marle AJ (2011) Formation of solar filaments by steady and nonsteady chromospheric heating. Astrophys J 737:27. https://doi.org/10.1088/0004-637X/737/1/27. arXiv:1106.0094
- Xue ZK, Yan XL, Qu ZQ, Zhao L (2014) Transverse oscillation of a filament triggered by an extreme ultraviolet wave. In: Nagendra KN, Stenflo JO, Qu Q, Samooprna M (eds) Solar polarization 7, Astronomical Society of the Pacific, San Francisco, ASP conference series, vol 489, p 53Google Scholar
- Yi Z, Engvold O (1991) Vertical velocities and oscillations in quiescent filaments. Solar Phys 134:275–286. https://doi.org/10.1007/BF00152648
- Yi Z, Engvold O, Keil SL (1991) Structure and oscillations in quiescent filaments from observations in He i \(\lambda \) 10830 Å. Solar Phys 132:63–80. https://doi.org/10.1007/BF00159130
- Zapiór M, Kotrč P, Rudawy P, Oliver R (2015) Simultaneous observations of solar prominence oscillations using two remote telescopes. Solar Phys 290:1647–1659. https://doi.org/10.1007/s11207-015-0696-x
- Zapiór M, Oliver R, Ballester JL, Heinzel P (2016) Synthetic hydrogen spectra of oscillating prominence slabs immersed in the solar corona. Astrophys J 827:131. https://doi.org/10.3847/0004-637X/827/2/131
- Zaqarashvili TV (2003) Observation of coronal loop torsional oscillation. Astron Astrophys 399:L15–L18. https://doi.org/10.1051/0004-6361:20030084. arXiv:astro-ph/0301316
- Zhang QM, Chen PF, Xia C, Keppens R (2012) Observations and simulations of longitudinal oscillations of an active region prominence. Astron Astrophys 542:A52. https://doi.org/10.1051/0004-6361/201218786. arXiv:1204.3787
- Zhang QM, Chen PF, Xia C, Keppens R, Ji HS (2013) Parametric survey of longitudinal prominence oscillation simulations. Astron Astrophys 554:A124. https://doi.org/10.1051/0004-6361/201220705. arXiv:1304.3798
- Zhang QM, Li T, Zheng RS, Su YN, Ji HS (2017) Large-amplitude longitudinal oscillations in a solar filament. Astrophys J 842:27. https://doi.org/10.3847/1538-4357/aa73d2. arXiv:1705.04820
- Zhou YH, Zhang LY, Ouyang Y, Chen PF, Fang C (2017) Solar filament longitudinal oscillations along a magnetic field tube with two dips. Astrophys J 839:9. https://doi.org/10.3847/1538-4357/aa67de. arXiv:1703.06560
- Zirker JB, Engvold O, Martin SF (1998) Counter-streaming gas flows in solar prominences as evidence for vertical magnetic fields. Nature 396:440–441. https://doi.org/10.1038/24798
Copyright information
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.