Advertisement

Treatment of Urmia Peat by Cement Kiln Dust

  • K. Badv
  • J. Hoseinpour Lonbar
Research Paper
  • 25 Downloads

Abstract

Peat soil normally has high organic matter content, high compressibility, and high magnitude and rate of creep. It may also be associated with poor strength characteristics and a risk of large deformation. The aim of this work is to demonstrate the application of cement kiln dust (CKD) as a pozzolanic additive to stabilize Urmia peat. CKD was added to Urmia peat by 10, 20 and 30 wt% of dry peat and was allowed to cure in water for 7, 14 and 28 days. Test specimens of untreated and stabilized peat were tested to evaluate their unconfined compressive strength (UCS), California bearing ratio (CBR) and shear strength parameters. The results showed that CKD-treated peat samples, particularly those with longer curing time, have higher cohesion, angle of internal friction, CBR and UCS compared to natural peat. Findings of this research advocate that the use of cement kiln dust as an additive to peat improves its geotechnical characteristics.

Keywords

Urmia peat Cement kiln dust Treatment Geotechnical properties 

Notes

Acknowledgements

This paper forms a part of a research program in geoenvironmental engineering being conducted at the Environmental Geotechnique Research Laboratory at the Department of Civil Engineering in Urmia University, Iran. The funding to this research was made possible by the award of research grant to K. Badv from Urmia University of Iran.

References

  1. Abdel Aziz SHM, Altohamy AK, Towfeek AR (2010) Physical and chemical properties for stabilized sand using cement kiln dust. J Eng Sci Assiut Univ 38(3):655–669Google Scholar
  2. Albusoda BS, Salem LAKh (2012) Stabilization of dune sand by using cement kiln dust (CKD). J Earth Sci Geotech Eng 2(1):131–143Google Scholar
  3. Al-Harthy AS, Taha R, Al-Maamary F (2003) Effect of cement kiln dust (CKD) on mortar and concrete mixtures. Constr Build Mater 17:353–360CrossRefGoogle Scholar
  4. Amadi AA (2014) Enhancing durability of quarry fines modified black cotton soil subgrade with cement kiln dust stabilization. J Transp Geotech 1:55–61CrossRefGoogle Scholar
  5. Aminur MR, Kolay PK, Taib SNL (2009) Effect of admixtures on the stabilization of peat soil from Sarawak. In: Indian geotechnical conference, pp 410–414Google Scholar
  6. Andriesse JP (1988) Nature and management of tropical peat soils, 1st edn. Food and Agriculture Organization of the United Nations, RomeGoogle Scholar
  7. Badv K, Emami R (2011) Prediction of the settlement and control of the embankment constructed on soft foundation using geotextile reinforcement (case study of Shahid Kalantary highway at Kilometers 7 + 800). J Civ Eng Univ Ferdowsi Mashhad 22(2):33–46 (in Persian) Google Scholar
  8. Badv K, Sayadian T (2011) Physical and geotechnical properties of Urmia peat. In: 14th Pan-American conference on soil mechanics and geotechnical engineering and 64th Canadian geotechnical conference, Toronto, Canada, pp 1–7Google Scholar
  9. Badv K, Sayadian T (2012) An investigation into the geotechnical characteristics of Urmia peat. Iran J Sci Technol Trans Civ Eng 36(C2):167–180Google Scholar
  10. Ballivy B, Rouis J, Breton D (1992) Use of cement residual kiln dust as landfill liner. In: Proceedings of the cement industry solutions to waste management, Calgary, Alberta, Canada, pp 99–118Google Scholar
  11. Cai Y, Shi B, Ng CWW, Tang C (2006) Effect of polypropylene fiber and lime admixture on engineering properties of clayey soil. Eng Geol 87:230–240CrossRefGoogle Scholar
  12. Den Haan EJ (1997) An overview of the mechanical behavior of peats and organic soils and some appropriate construction techniques. In: Proceedings of the conference on recent advances in soft soil engineering, Kuching, Malaysia, pp 17–45Google Scholar
  13. Denhaan EJ (1997) An overview of the mechanical behaviour of peats and organic soils and some appropriate construction techniques. In: Huat B (ed) Proceedings of conference on recent advances in soft soil engineering, Sarawak, Malaysia, pp 17–45Google Scholar
  14. Edil TB (2003) Recent advancements in geotechnical characterization and construction over peat and organic soil. In: Proceedings of 2nd international conference on advances in soft soil engineering and technology, Putrajaya, Malaysia, pp 3–35Google Scholar
  15. ElMashad M, Hashad A (2013) Improving the strength of sandy silt soils by mixing with cement kiln dust. J Eng Sci Assiut Univ 41(4):185–198Google Scholar
  16. Hebib S, Farell ER (2003) Some experiences on the stabilization of Irish peats. Can Geotech J 40:107–120CrossRefGoogle Scholar
  17. Huat BBK (2004) Organic and peat soils engineering. University Putra Malaysia Press, SerdangGoogle Scholar
  18. Hwang J (2008) Effect of cement treatment on the 1-D consolidation behavior of highly organic soil. Ph.D. dissertation, Lyles School of Civil Engineering, Purdue University, p 433Google Scholar
  19. IEEE-IAS Cement Industry Committee (2008) Beneficial use of cement kiln dust. In: IEEE/PCA 50th cement industry technical conference, Miami, USA, pp 19–22Google Scholar
  20. Ismaiel HAH (2013) Cement kiln dust chemical stabilization of expansive soil exposed at El-Kawther Quarter, Sohag Region, Egypt. Int J Geosci 4:1416–1424CrossRefGoogle Scholar
  21. Kalantari B, Huat BBK (2008) Peat soil stabilization using ordinary Portland cement, polypropylene fibres and air curing technique. Electron J Geotech Eng 13(J):1–13Google Scholar
  22. Kalantari B, Prasad A (2014) A study of the effect of various curing techniques on the strength of stabilized peat. J Transp Geotech 1(3):119–128CrossRefGoogle Scholar
  23. Kazemian S, Huat BBK, Prasad A, Barghchi M (2011) Effect of peat media on stabilization of peat by traditional binders. Int J Phys Sci 6(3):476–481Google Scholar
  24. Keerthi Y, Divya Kanthi IP, Tejaswi N, Shyam Chamberlink K, Satyanarayana B (2013) Stabilization of clayey soil using cement kiln waste. Int J Adv Struct Geotech Eng 2(2):77–82Google Scholar
  25. Kolay PK, Pui MP (2010) Peat stabilization using gypsum and fly ash. Int J Civ Environ Eng 1(2):98–117Google Scholar
  26. Kolay PK, Sii HY, Taib SNL (2011) Tropical peat soil stabilization using class F pond ash from coal fired power plant. Int J Civ Environ Eng 3(2):79–83Google Scholar
  27. Konsta-Gdoutos MS, Shah SP (2003) Synthesis and properties of novel blended cements based on CKD–Slag blends. Cem Concr Res 33:269–276CrossRefGoogle Scholar
  28. Kumar B, Puri N (2013) Stabilization of weak pavement subgrades using cement kiln dust. Int J Civ Eng Technol 4(1):26–37Google Scholar
  29. MacFarlane IC (1969) Engineering characteristics of peat, Handbook of Muskeg engineering. University of Toronto Press, TorontoCrossRefGoogle Scholar
  30. Mesri G, Ajlouni M (2007) Engineering properties of fibrous peats. J Geotech Geoenviron Eng 133(7):850–866CrossRefGoogle Scholar
  31. Moses GK, Saminu A (2012) Cement kiln dust stabilization of compacted black cotton soil. Electron J Geotech Eng 17(F):825–836Google Scholar
  32. Okafora FO, Egbeb EA (2013) Potential of cement kiln dust in subgrade improvement. Niger J Technol 32(1):109–116Google Scholar
  33. Oriola FOP, Moses G (2011) Compacted black cotton soil treated with cement kiln dust as hydraulic barrier material. Am J Sci Ind Res 2(4):521–530Google Scholar
  34. Peethamparana S, Olekb J, Diamondc S (2009) Mechanism of stabilization of Na montmorillonite clay with cement kiln dust. J Cem Concr Res 39:580–589CrossRefGoogle Scholar
  35. Preston ML (1993) Use of cement kiln dust as an agricultural lime and fertilizer. In: Emerging technologies symposium on cement and concrete in the global environment, Chicago, USA March 10–11, Portland Cement Association, Skokie, Illinois, PCA’s Cement Technical Support Library, DVD020.01©2005Google Scholar
  36. Rehan R, Nehdi M (2005) Carbon dioxide emissions and climate change: policy implications for the cement industry. Environ Sci Policy 8:105–114CrossRefGoogle Scholar
  37. Said J, Taib SNL (2009) Peat stabilization with carbide lime. Int J Civ Environ Eng 1(1):120–132Google Scholar
  38. Sariosseiri F, Muhunthan B (2009) Effect of cement treatment on geotechnical properties of some Washington State soils. Eng Geol 104:119–125CrossRefGoogle Scholar
  39. Sing WL, Hashim R, Ali FH (2009) Unconfined compressive strength of cemented peat. Aust J Basic Appl Sci 3(4):3850–3856Google Scholar
  40. Sing WL, Hashim R, Ali FH (2013a) Utilization of sodium bentonite to maximize the filler and pozzolanic effects of stabilized peat. J Eng Geol 152:56–66CrossRefGoogle Scholar
  41. Sing WL, Hashim R, Ali FH (2013b) Improved strength and reduced permeability of stabilized peat: focus on application of kaolin as a pozzolanic additive. J Constr Build Mater 40:783–792CrossRefGoogle Scholar
  42. Skels P, Bondars K, Korjakins A (2013) Unconfined compressive strength properties of cement stabilized peat. In: Proceedings of the 4th international conference on civil engineering, part IGoogle Scholar
  43. Terzaghi K, Peck RB, Mesri G (1926) Soil mechanics in engineering practice. Wiley, New YorkGoogle Scholar
  44. Udoeyo FF, Hyee A (2002) Strength of cement kiln dust concrete. ASCE J Mater Civ Eng 14:524–526CrossRefGoogle Scholar
  45. Velosa AL, Cachim PB (2009) Hydraulic-lime based concrete: strength development using a pozzolanic addition and different curing conditions. Constr Build Mater 23:2107–2111CrossRefGoogle Scholar
  46. von Post L (1922) Sveriges geologiska undersoknings torvinventering och nagre av dess hittills vunna resultat. Sr. Mosskulturfo, Tidskr 1:1–27Google Scholar
  47. Wang K, Konsta-Gdoutos MS, Shah SP (2002) Hydration, rheology and strength of OPC–CKD–Slag binders. ACI Mater J 99(2):173–179Google Scholar

Copyright information

© Shiraz University 2018

Authors and Affiliations

  1. 1.Department of Civil EngineeringUrmia UniversityUrmiaIslamic Republic of Iran

Personalised recommendations