The Effect of Vanadium Content on Microstructure and Impact Toughness of Forged High Alloy Steel X96CrMo12-1
- 29 Downloads
The aim of this research was to examine the influence of vanadium on the structure and impact toughness of the forged high alloy steel X96CrMo12-1. It is known that vanadium affects the process of solidification of this alloy by narrowing the temperature interval of crystallization. Vanadium, as an alloying element, moves liquids and solidus lines toward higher temperatures, approximately for 25–30 °C. In addition, vanadium forms V6C5 carbides, which are partly distributed between the present phases in the steel, carbide (Cr,Fe)7C3 and austenite. The presence of vanadium enables the formation of (Cr,Fe)23C6 carbide and its precipitation into austenite during the cooling process. In local areas around fine carbide particles, austenite is transformed into martensite, i.e., vanadium reduces remained austenite and improves quenching process. Studies have shown that as the content of vanadium increases up to 5%, the impact toughness of this steel is significantly increased. The steel X96CrMo12-1 contains remarkably less carbon than high alloyed Cr–Mo ledeburite steels and does not contain a eutectic microconstituent in the structure. So it can be treated by forging process thus provide a more compact and tougher structure. The basic problem in the application of high alloyed Cr–Mo steels is to increase their impact toughness, while sustain a relatively high value of hardness. Studies have shown that vanadium strongly increases toughness while retaining high hardness, which is a requirement for wear-resistant steels.
Keywordsvanadium impact toughness hardness microstructure
- 1.A. Todić, D. Čikara, T. Todić, B. Pejović, M. Mišić, I. Čamagić, The effect of vanadium content on mechanical properties and structure of self-hardening steel X160CrMo12-1. J. Mech. Eng. Autom. 3, 168–172 (2013)Google Scholar
- 3.D. Čikara, M. Rakin, D. Čikara-Anič, Quality optimization of steel milling balls, in Proceedings of 18th International Conference on Material Handling, Constructions and Logistics, Belgrade, pp. 131–138 (2006)Google Scholar
- 5.M. Filipović, Ž. Kamberović, M. Korać, Uticaj termičke obrade na žilavost i otpornost na habanje Fe-C-Cr-Nb legura. J. Metall. 14(4), 243–252 (2008)Google Scholar
- 6.M. Filipović, Uticaj sadržaja vanadijuma i brzine hlađenja na stereološke parametre faza u strukturi Fe-C-Cr-V legura. J. Metall. 10(2), 127–138 (2004)Google Scholar