Three-Dimensional Analysis of Uplift Behaviour of Square Horizontal Anchor Plate in Frictional Soil

  • Awdhesh Kumar Choudhary
  • Bhardwaj Pandit
  • G. L. Sivakumar Babu
Original Paper
  • 44 Downloads

Abstract

The paper examines the response of square horizontal anchor plate in frictional soil using three-dimensional analysis. The present numerical model is found to closely predict the experimental uplift pressure–displacement relationship. The ultimate uplift load of anchor plate is found to be significantly influenced by its embedment depth, anchor plate size and properties of the fill sand. Elastic modulus of sand has significant effect on the initial slope of the pressure–displacement responses. However, the elastic modulus has marginal effect on the ultimate capacity of anchor plate. The performance of anchor plate is found to increase by 1.8 times with increase in dilation angle of sand from ψ = 0 to ψ = ϕ in dense sand. The scale effect on the performance of anchor plate is found to be marginal for anchor size in the range of 0.5 m × 0.5 m to 1 m × 1 m. The results obtained from the present numerical investigation agree well with the results reported in literature for similar cases.

Keywords

Uplift capacity Square anchor plate Numerical model Sand FLAC3D 

Notes

Acknowledgements

The authors gratefully acknowledged the financial support provided to the first author by DST-SERB, India under the National Post-Doctoral Fellowship (NPDF) scheme of file number: PDF/20l6/002651 at the Department of Civil Engineering, IISc Bangalore. The authors are thankful to the anonymous reviewers for their valuable review comments and suggestions which have enhanced the presentations of this paper.

References

  1. 1.
    Das BM, Shukla SK (2013) Earth anchors. J. Ross Publishing, NewcastleGoogle Scholar
  2. 2.
    Das BM, Seeley GR (1975) Breakout resistance of shallow horizontal anchors. J Geotech Eng 101(9):999–1003Google Scholar
  3. 3.
    Rowe RK, Davis EH (1982) The behaviour of anchor plates in sand. Geotechnique 32(1):25–41CrossRefGoogle Scholar
  4. 4.
    Dickin E (1988) Uplift behaviour of horizontal anchor plates in sand. J Geotech Eng 114(11):1300–1317CrossRefGoogle Scholar
  5. 5.
    Murray EJ, Geddes JD (1989) Resistance of passive inclined anchors in cohesionless medium. Geotechnique 39(3):417–431Google Scholar
  6. 6.
    Ilamparuthi K, Muthukrishnaiah K (1999) Anchors in sand bed: delineation of rupture surface. Ocean Eng 26:1249–1273CrossRefGoogle Scholar
  7. 7.
    Ilamparuthi K, Dickin EA, Muthukrisnaiah K (2002) Experimental investigation of the uplift behaviour of circular plate anchors embedded in sand. Can Geotech J 39:648–664CrossRefGoogle Scholar
  8. 8.
    Liu J, Liu M, Zhu Z (2012) Sand deformation around an uplift plate anchor. J Geotech Geoenviron Eng 138:728–737CrossRefGoogle Scholar
  9. 9.
    Mors H (1959) The behaviour of mast foundations subject to tensile forces. Bautechnik 10:367–378Google Scholar
  10. 10.
    Giffels WC, Graham RE, Mook JF (1960) Concrete cylinder anchors proved for 345-KV tower line. Electr World 154:46–49Google Scholar
  11. 11.
    Balla A (1961) The resistance to breaking out of mushroom foundations for pylons. In: Proceedings of the 5th international conference on soil mechanics and foundation engineering, Paris, pp 569–576Google Scholar
  12. 12.
    Baker WH, Konder RL (1966) Pullout load capacity of a circular earth anchor buried in sand. Highway Res Record 108:1–10Google Scholar
  13. 13.
    Meyerhof GG, Adams SI (1968) The ultimate uplift capacity of foundations. Can Geotech J 5(4):225–444CrossRefGoogle Scholar
  14. 14.
    Vesic AS (1971) Breakout resistance of objects embedded in ocean bottom. J Soil Mech Found Div 97(9):1183–1205Google Scholar
  15. 15.
    Chattopadhyay BC, Pise PJ (1986) Breakout resistance of horizontal anchors in sand. Soils Found 26(4):16–22CrossRefGoogle Scholar
  16. 16.
    Sutherland HB (1988) Uplift resistance of soils. Geotechnique 38(4):493–516MathSciNetCrossRefGoogle Scholar
  17. 17.
    Basudhar PK, Singh DN (1994) A generalized procedure for predicting optimal lower bound break-out factors of strip anchors. Geotechnique 44(2):307–318CrossRefGoogle Scholar
  18. 18.
    Merifield RS, Sloan SW (2006) The ultimate pullout capacity of anchors in frictional soil. Can Geotech J 43(8):852–868CrossRefGoogle Scholar
  19. 19.
    Kumar J, Kouzer KM (2008) Vertical uplift capacity of horizontal anchors using upper bound limit analysis and finite elements. Can Geotech J 45:698–704CrossRefGoogle Scholar
  20. 20.
    Koprivica S (2013) Uplift behavior of shallow horizontal plate anchors in sand. Int J Geotech Eng 3(4):485–491CrossRefGoogle Scholar
  21. 21.
    Merifield RS, Lyamin AV, Sloan SW (2006) Three-dimensional lower-bound solutions for the stability of plate anchors in sand. Geotechnique 56(2):123–132CrossRefGoogle Scholar
  22. 22.
    Rokonuzzaman M, Sakai T (2012) Model tests and 3D finite element simulations of uplift resistance of shallow rectangular anchor foundations. Int J Geomech 12(2):105–112CrossRefGoogle Scholar
  23. 23.
    Choudhary AK, Dash SK (2013) Uplift behaviour of horizontal plate anchor embedded in geocell-reinforced sand. In: e-Proceedings of Indian Geotechnical Conference, RoorkeeGoogle Scholar
  24. 24.
    Dickin EA, Laman M (2007) Uplift response of strip anchors in cohesionless soil. Adv Eng Softw 38:618–625CrossRefGoogle Scholar
  25. 25.
    Bildik S, Laman M, Suleiman MT (2013) Uplift behavior of anchor plates in slope. In: Geo-congress, San Diego, pp 1802–1810Google Scholar
  26. 26.
    Choudhary AK, Dash SK (2017) Load carrying mechanism of vertical plate anchors in sand. Int J Geomech 17(5):04016116CrossRefGoogle Scholar
  27. 27.
    Dickin EA, Leung CF (1983) Centrifuge model tests on vertical anchor plates. J Geotech Eng 109(12):1503–1525CrossRefGoogle Scholar
  28. 28.
    Mokhbi H, Mellas M, Mabrouki A, Pereira J-M (2017) Three-dimensional numerical and analytical study of horizontal group of square anchor plates in sand. Acta Geotech 13:159–174CrossRefGoogle Scholar
  29. 29.
    Dickin EA, Leung CF (1985) Evaluation of design methods for vertical anchor plates. J Geotech Eng 111(4):500–520CrossRefGoogle Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2018

Authors and Affiliations

  • Awdhesh Kumar Choudhary
    • 1
  • Bhardwaj Pandit
    • 1
  • G. L. Sivakumar Babu
    • 1
  1. 1.Department of Civil EngineeringIndian Institute of Science BangaloreBangaloreIndia

Personalised recommendations