Correction to: Shock Response of Polymethylmethacrylate
- 105 Downloads
Correction to: Journal of Dynamic Behavior of Materials. (2016) 2:372–378 https://doi.org/10.1007/s40870-016-0071-5
Table 1 had incorrect densities for the RH and Poly samples. The correct density for RH samples is 1.1892 ± 0.0003 g/cm3. The correct density for Poly samples is 1.1842 ± 0.0004 g/cm3. The authors thank Christopher Neel from the Air Force Research Laboratory for bringing this error to our attention.
Additionally, there is an error in Eq. (6). 1.7576 × 10−2 should be 1.7576 × 10−7.