Advertisement

Ni-Concentration Dependence of Directed Energy Deposited NiTi Alloy Microstructures

  • Beth A. Bimber
  • Reginald F. HamiltonEmail author
  • Todd A. Palmer
Technical Article
  • 37 Downloads

Abstract

Localized re-melting and re-heating in regions between overlapping passes and layers drive localized microstructure development during laser-based additive manufacturing processes. Ti-rich (Ti52.1Ni47.9 at.%) and Ni-rich (Ni53Ti47 at.%) alloy builds were fabricated using a laser-based directed energy deposition (LDED) process and sectioned in three orthogonal cross-sections to provide a 3-dimensional view of the grain and precipitate morphologies in the interpass and interlayer regions. Fine equiaxed grains, which were an order of magnitude smaller than the columnar grains in the bulk regions, were observed in the interfacial regions. While these columnar grains showed preferential orientation in the highest heat flow direction corresponding to the build height, the fine equiaxed grain structures in the interfacial regions showed no orientation preferences. In addition to these changes in grain structures, precipitation of second phases is also impacted in these regions. The re-melting and re-heating characteristic of the interfacial regions produces precipitates in the Ni-rich alloys with fine oriented morphologies different from those observed in the bulk regions.

Keywords

Materials SMA Microstructure Directed energy deposition 

Notes

References

  1. 1.
    Elahinia MH, Moghaddam NS, Andani MT, Amerinatanzi A, Bimber BA, Hamilton RF (2016) Fabrication of NiTi through additive manufacturing: a review. Prog Mater Sci 83:630–663CrossRefGoogle Scholar
  2. 2.
    Khoo Z, Liu Y, An J, Chua C, Shen Y, Kuo C (2018) A review of selective laser melted NiTi shape memory alloy. Materials (Basel) 11:519.  https://doi.org/10.3390/ma11040519 CrossRefGoogle Scholar
  3. 3.
    Manvatkar V, De A, DebRoy T (2015) Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process. Mater Sci Technol 31:924–930.  https://doi.org/10.1179/1743284714Y.0000000701 CrossRefGoogle Scholar
  4. 4.
    Cao S, Gu D, Shi Q (2017) Relation of microstructure, microhardness and underlying thermodynamics in molten pools of laser melting deposition processed TiC/Inconel 625 composites. J Alloys Compd 692:758–769.  https://doi.org/10.1016/j.jallcom.2016.09.098 CrossRefGoogle Scholar
  5. 5.
    Knapp GL, Mukherjee T, Zuback JS, Wei HL, Palmer TA, De A, DebRoy T (2017) Building blocks for a digital twin of additive manufacturing. Acta Mater 135:390–399.  https://doi.org/10.1016/j.actamat.2017.06.039 CrossRefGoogle Scholar
  6. 6.
    Kriczky DA, Irwin J, Reutzel EW, Michaleris P, Nassar AR, Craig J (2015) 3D spatial reconstruction of thermal characteristics in directed energy deposition through optical thermal imaging. J Mater Process Technol 221:172–186.  https://doi.org/10.1016/j.jmatprotec.2015.02.021 CrossRefGoogle Scholar
  7. 7.
    DebRoy T, Wei HL, Zuback JS, Mukherjee T, Elmer JW, Milewski JO, Beese AM, Wilson-Heid A, De A, Zhang W (2017) Additive manufacturing of metallic components – process, structure and properties. Prog Mater Sci 92:112–224.  https://doi.org/10.1016/J.PMATSCI.2017.10.001 CrossRefGoogle Scholar
  8. 8.
    Marattukalam JJ, Balla VK, Das M, Bontha S, Kalpathy SK (2018) Effect of heat treatment on microstructure, corrosion, and shape memory characteristics of laser deposited NiTi alloy. J Alloys Compd 744:337–346.  https://doi.org/10.1016/j.jallcom.2018.01.174 CrossRefGoogle Scholar
  9. 9.
    Baran A, Polanski M (2018) Microstructure and properties of LENS (laser engineered net shaping) manufactured Ni-Ti shape memory alloy. J Alloys Compd 750:863–870.  https://doi.org/10.1016/j.jallcom.2018.03.400 CrossRefGoogle Scholar
  10. 10.
    Hamilton RF, Bimber BA, Palmer TA (2018) Correlating microstructure and superelasticity of directed energy deposition additive manufactured Ni-rich NiTi alloys. J Alloy Compd 739:712–722CrossRefGoogle Scholar
  11. 11.
    Saedi S, Turabi AS, Andani MT, Moghaddam NS, Elahinia MH, Karaca HE (2017) Texture, aging, and superelasticity of selective laser melting fabricated Ni-rich NiTi alloys. Mater Sci Eng, A 686:1–10.  https://doi.org/10.1016/j.msea.2017.01.008 CrossRefGoogle Scholar
  12. 12.
    Bimber BA, Hamilton RF, Keist J, Palmer TA (2016) Anisotropic microstructure and superelasticity of additive manufactured NiTi alloy bulk builds using laser directed energy deposition. Mater Sci Eng, A.  https://doi.org/10.1016/j.msea.2016.07.059 Google Scholar
  13. 13.
    Oliveira JP, Cavaleiro AJ, Schell N, Stark A, Miranda RM, Ocana JL, Fernandes FMB (2018) Effects of laser processing on the transformation characteristics of NiTi: a contribute to additive manufacturing. Scr Mater 152:122–126.  https://doi.org/10.1016/j.scriptamat.2018.04.024 CrossRefGoogle Scholar
  14. 14.
    Krishna BV, Bose S, Bandyopadhyay A (2007) Laser processing of net-shape NiTi shape memory alloy. Metall Mater Trans A 38:1096–1103.  https://doi.org/10.1007/s11661-007-9127-4 CrossRefGoogle Scholar
  15. 15.
    Saedi S, Moghaddam NS, Amerinatanzi A, Elahinia MH, Karaca HE (2018) On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi. Acta Mater 144:552–560.  https://doi.org/10.1016/j.actamat.2017.10.072 CrossRefGoogle Scholar
  16. 16.
    Bormann T, Schumacher R, Müller B, Mertmann M, de Wild M (2012) Tailoring selective laser melting process parameters for NiTi implants. J Mater Eng Perform 21:2519–2524.  https://doi.org/10.1007/s11665-012-0318-9 CrossRefGoogle Scholar
  17. 17.
    Khademzadeh S, Zanini F, Bariani PF, Carmignato S (2018) Precision additive manufacturing of NiTi parts using micro direct metal deposition. Int J Adv Manuf Technol.  https://doi.org/10.1007/s00170-018-1822-3 Google Scholar
  18. 18.
    Hamilton RF, Palmer TA, Bimber BA (2015) Spatial characterization of the thermal-induced phase transformation throughout as-deposited additive manufactured NiTi bulk builds. Scr Mater 101:56–59.  https://doi.org/10.1016/j.scriptamat.2015.01.018 CrossRefGoogle Scholar
  19. 19.
    Hamilton RF, Bimber BA, Andani MT, Elahinia MH (2017) Multi-scale shape memory effect recovery in NiTi alloys additive manufactured by selective laser melting and laser directed energy deposition. J Mater Process Technol 250:55–64CrossRefGoogle Scholar
  20. 20.
    ASTM (2011) ASTM F2921-11: standard terminology for additive manufacturing—coordinate systems and test methodologies. ASTM Int.  https://doi.org/10.1520/F2921 Google Scholar
  21. 21.
    ASTM (2014) ASTM E112: standard test methods for determining average grain size. ASTM Int. 25:1–28.  https://doi.org/10.1520/E0112-13.1.4 Google Scholar
  22. 22.
    Bourell D, Kruth JP, Leu M, Levy G, Rosen D, Beese AM, Clare A (2017) Materials for additive manufacturing. CIRP Ann - Manuf Technol.  https://doi.org/10.1016/j.cirp.2017.05.009 Google Scholar
  23. 23.
    Chen S, Guillemot G, Gandin CA (2016) Three-dimensional cellular automaton-finite element modeling of solidification grain structures for arc-welding processes. Acta Mater 115:448–467.  https://doi.org/10.1016/j.actamat.2016.05.011 CrossRefGoogle Scholar
  24. 24.
    Collins PC, Brice DA, Samimi P, Ghamarian I, Fraser HL (2016) Microstructural control of additively manufactured metallic materials. Annu Rev Mater Res 46:63–91.  https://doi.org/10.1146/annurev-matsci-070115-031816 CrossRefGoogle Scholar
  25. 25.
    Xu X, Lin X, Yang M, Chen J, Huang W (2009) Microstructure evolution in laser solid forming of Ti–50wt% Ni alloy. J Alloys Compd 480:782–787.  https://doi.org/10.1016/j.jallcom.2009.02.056 CrossRefGoogle Scholar
  26. 26.
    Scheitler C, Hentschel O, Krebs T, Nagulin KY, Schmidt M (2017) Laser metal deposition of NiTi shape memory alloy on Ti sheet metal: influence of preheating on dissimilar build-up. J Laser Appl 29:022309.  https://doi.org/10.2351/1.4983246 CrossRefGoogle Scholar

Copyright information

© ASM International 2019

Authors and Affiliations

  • Beth A. Bimber
    • 1
  • Reginald F. Hamilton
    • 1
    • 2
    Email author
  • Todd A. Palmer
    • 1
    • 2
  1. 1.Engineering Science and Mechanics DepartmentPennsylvania State UniversityUniversity ParkUSA
  2. 2.Materials Research InstitutePennsylvania State UniversityUniversity ParkUSA

Personalised recommendations