Advertisement

Study on Process Monitoring of Elliptical Vibration Cutting by Utilizing Internal Data in Ultrasonic Elliptical Vibration Device

  • Hongjin Jung
  • Takehiro Hayasaka
  • Eiji Shamoto
Regular Paper
  • 49 Downloads

Abstract

In the present study, monitoring of elliptical vibration cutting process by utilizing internal data in the ultrasonic elliptical vibration device without external sensors such as a dynamometer and displacement sensor is investigated. The internal data utilized here is the change of excitation frequency, i.e. resonant frequency of the device, voltages applied to the piezoelectric actuators composing the device, and electric currents flowing through the actuators. These internal data change automatically in the elliptical vibration control system in order to keep a constant elliptical vibration against the change of the cutting process. Correlativity between the process and the internal data is described by using a vibration model of ultrasonic elliptical vibration cutting and verified by several experiments, i.e. planing and mirror surface finishing of hardened die steel carried out with single crystalline diamond tools. As a result, it is proved that it is possible to estimate the elements of elliptical vibration cutting process, e.g. tool wear and machining load, which are important for stable cutting in such precision machining.

Keywords

Elliptical vibration cutting Process monitoring Internal data 

References

  1. 1.
    Kang, H. S., Lee, J. Y., Choi, S., Kim, H., Park, J. H., et al., “Smart Manufacturing: Past Research, Present Findings, and Future Directions,” International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 3, No. 1, pp. 111–128, 2016.CrossRefGoogle Scholar
  2. 2.
    Park, S.-J., Lee, H.-S., and Jeong, H., “Signal Analysis of CMP Process Based on AE Monitoring System,” International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 2, No. 1, pp. 15–19, 2015.CrossRefGoogle Scholar
  3. 3.
    Chua, Z. Y., Ahn, I. H., and Moon, S. K., “Process Monitoring and Inspection Systems in Metal Additive Manufacturing: Status and Applications,” International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 4, No. 2, pp. 235–245, 2017.CrossRefGoogle Scholar
  4. 4.
    Delio, T., Tlusty, J., and Smith, S., “Use of Audio Signals for Chatter Detection and Control,” Journal of Engineering for Industry, Vol. 114, No. 2, pp. 146–157, 1992.Google Scholar
  5. 5.
    Smith, S. and Tlusty, J., “Stabilizing Chatter by Automatic Spindle Speed Regulation,” CIRP Annals-Manufacturing Technology, Vol. 41, No. 1, pp. 433–436, 1992.CrossRefGoogle Scholar
  6. 6.
    Altintas, Y., “Prediction of Cutting Forces and Tool Breakage in Milling from Feed Drive Current Measurements,” ASME Journal of Engineering for Industry, Vol. 114, No. 4, pp. 386–392, 1992.CrossRefGoogle Scholar
  7. 7.
    Stein, J. L. and Huh, K., “Monitoring Cutting Forces in Turning: A Model-Based Approach,” Journal of Manufacturing Science and Engineering, Vol. 124, No. 1, pp. 26–31, 2002.CrossRefGoogle Scholar
  8. 8.
    Kakinuma, Y. and Kamigochi, T., “External Sensor-Less Tool Contact Detection by Cutting Force Observer,” Procedia CIRP, Vol. 2, pp. 44–48, 2012.CrossRefGoogle Scholar
  9. 9.
    Jiang, C., Zhang, Y., and Xu, H., “In-Process Monitoring of Tool Wear Stage by the Frequency Band-Energy Method,” CIRP Annals-Manufacturing Technology, Vol. 36, No. 1, pp. 45–48, 1987.CrossRefGoogle Scholar
  10. 10.
    de Jesus, R.-T. R., Gilberto, H.-R., Ivan, T.-V., and Carlos, J.-C. J., “Driver Current Analysis for Sensorless Tool Breakage Monitoring of CNC Milling Machines,” International Journal of Machine Tools and Manufacture, Vol. 43, No. 15, pp. 1529–1534, 2003.CrossRefGoogle Scholar
  11. 11.
    Rivero, A., de Lacalle, L. L., and Penalva, M. L., “Tool Wear Detection in Dry High-Speed Milling Based Upon the Analysis of Machine Internal Signals,” Mechatronics, Vol. 18, No. 10, pp. 627–633, 2008.CrossRefGoogle Scholar
  12. 12.
    Jung, H., Shamoto, E., Chin, H., Anh, N. V., “Monitoring of Elliptical Vibration Cutting Process by Utilizing Internal Data in Ultrasonic Elliptical Vibration Device,” Proc. of Japan Society for Precision Engineering Spring Meeting, pp. 153–154, 2016.Google Scholar
  13. 13.
    Shamoto, E. and Moriwaki, T., “Study on Elliptical Vibration Cutting,” CIRP Annals-Manufacturing Technology, Vol. 43, No. 1, pp. 35–38, 1994.CrossRefGoogle Scholar
  14. 14.
    Shamoto, E., Suzuki, N., Moriwaki, T., and Naoi, Y., “Development of Ultrasonic Elliptical Vibration Controller for Elliptical Vibration Cutting,” CIRP Annals-Manufacturing Technology, Vol. 51, No. 1, pp. 327–330, 2002.CrossRefGoogle Scholar
  15. 15.
    Shamoto, E. and Moriwaki, T., “Ultaprecision Diamond Cutting of Hardened Steel by Applying Elliptical Vibration Cutting,” CIRP Annals-Manufacturing Technology, Vol. 48, No. 1, pp. 441–444, 1999.CrossRefGoogle Scholar
  16. 16.
    Jung, H., Shamoto, E., Ueyama, T., Hamada, S., and Xu, L., “Mirror Surface Finishing of Hardened Die Steel by High-Power Ultrasonic Elliptical Vibration Cutting,” Journal of Machine Engineering, Vol. 16, No. 1, pp. 5–14, 2016.Google Scholar

Copyright information

© Korean Society for Precision Engineering 2018

Authors and Affiliations

  1. 1.Department of Aerospace EngineeringNagoya UniversityFuro-cho, Chikusa-ku, Nagoya, AichiJapan

Personalised recommendations