Advertisement

Generating virtual process maps of SLM using powder-scale SPH simulations

  • Jan-Philipp FürstenauEmail author
  • Henning Wessels
  • Christian Weißenfels
  • Peter Wriggers
Article
First Online:
  • 29 Downloads

Abstract

In selective laser melting (SLM), three-dimensional parts are build up from a metal powder bed by layer-wise melting with a laser. While SLM offers a high flexibility in geometrical design and material texture, the interplay of dozens of parameters is difficult to analyze experimentally. The current research focuses on numerical simulation to increase confidence in manufactured parts and to reduce the time to market. Using a smoothed particle hydrodynamics (SPH) implementation on GPU, the 3D melt pool dynamics in a single laser track can be simulated within less than 2 h with a reasonable spatial resolution of 3 \(\upmu \)m. This is an extreme speedup compared to concurrent CFD methods that have recently been applied to the same problem. Using a SPH implementation on GPU, the 3D melt pool dynamics in a single laser track can be simulated within less than an hour with a reasonable spatial resolution of 3 \(\upmu \)m. This is an extreme speedup compared to concurrent CFD methods that have recently been applied to the same problem. The computational efficiency allows to conduct parameter studies, which before were prohibitively expensive, to generate a virtual process. To make the simulations possible a curvature calculation technique was applied, which is novel in the field of SPH. Additionally the advantage of a direct description of the internal energy is outlined by comparing the approach with the commonly applied apparent heat approach. Designers may profit from the fast simulations in two different scenarios: firstly, through a direct numerical simulation of certain parameter combinations and scenarios and, secondly, by informing advanced surrogate models or part-scale models to predict the behavior of the entire part being produced. When adapting the heat source model, the SPH framework may also be used to describe the related electron beam melting process.

Keywords

SPH Additive manufacturing Selective laser melting Surface tension Virtual process map Laser powder bed fusion Steel powder 
This is a preview of subscription content, log in to check access.

Notes

Acknowledgements

The authors wish to thank Tobias Bode for providing the DEM-based particle packing algorithm.

References

  1. 1.
    Agarwala M, Bourell D, Beaman J, Marcus H, Barlow J (1995) Direct selective laser sintering of metals. Rapid Prototyp J 1(1):26–36.  https://doi.org/10.1108/13552549510078113 CrossRefGoogle Scholar
  2. 2.
    Ammer R, Markl M, Ljungblad U, Körner C, Rüde U (2014) Simulating fast electron beam melting with a parallel thermal free surface lattice boltzmann method. Comput Math Appl 67(2):318–330.  https://doi.org/10.1016/j.camwa.2013.10.001 MathSciNetCrossRefzbMATHGoogle Scholar
  3. 3.
    Anisimov SI, Khokhlov VA (1995) Instabilities in laser–matter interaction. CRC Press, Boca RatonGoogle Scholar
  4. 4.
    Brackbill J, Kothe DB, Zemach C (1992) A continuum method for modeling surface tension. J Comput Phys 100(2):335–354MathSciNetCrossRefGoogle Scholar
  5. 5.
    Chawla TC, Graff DL, Borg RC, Bordner GL, Weber DP, Miller D (1981) Thermophysical properties of mixed oxide fuel and stainless steel type 316 for use in transition phase analysis. Nucl Eng Des 67(1):57–74.  https://doi.org/10.1016/0029-5493(81)90155-2 CrossRefGoogle Scholar
  6. 6.
    Cleary PW (1998) Modelling confined multi-material heat and mass flows using SPH. Appl Math Model 22(12):981–993CrossRefGoogle Scholar
  7. 7.
    Cleary PW, Monaghan JJ (1999) Conduction modelling using smoothed particle hydrodynamics. J Comput Phys 148(1):227–264MathSciNetCrossRefGoogle Scholar
  8. 8.
    Colagrossi A, Landrini M (2003) Numerical simulation of interfacial flows by smoothed particle hydrodynamics. J Comput Phys 191(2):448–475CrossRefGoogle Scholar
  9. 9.
    Crespo AJ, Domínguez JM, Rogers BD, Gómez-Gesteira M, Longshaw S, Canelas R, Vacondio R, Barreiro A, García-Feal O (2015) Dualsphysics: open-source parallel CFD solver based on smoothed particle hydrodynamics (SPH). Comput Phys Commun 187:204–216CrossRefGoogle Scholar
  10. 10.
    Eagar TW, Tsai NS (1983) Temperature fields produced by traveling distributed heat sources. Weld J 62(12):346–355Google Scholar
  11. 11.
    EOS GmbH (2015) Help is fast at hand thanks to additive manufacturing: Alphaform produces a hip replacement designed by instrumentaria. https://www.eos.info/press/case_study/additive_manufactured_hip_implant. Accessed 12 Feb 2019
  12. 12.
    Fatehi R, Fayazbakhsh M, Manzari M (2008) On discretization of second-order derivatives in smoothed particle hydrodynamics. In: Proceedings of world academy of science, engineering and technology, vol.30. Citeseer, pp 243–246Google Scholar
  13. 13.
    Francois MM, Sun A, King WE, Henson NJ, Tourret D, Bronkhorst CA, Carlson NN, Newman CK, Haut T, Bakosi J, Gibbs JW, Livescu V, Vander Wiel SA, Clarke AJ, Schraad MW, Blacker T, Lim H, Rodgers T, Owen S, Abdeljawad F, Madison J, Anderson AT, Fattebert JL, Ferencz RM, Hodge NE, Khairallah SA, Walton O (2017) Modeling of additive manufacturing processes for metals: challenges and opportunities. Curr Opin Solid State Mater Sci 21(4):198–206.  https://doi.org/10.1016/j.cossms.2016.12.001 CrossRefGoogle Scholar
  14. 14.
    Ganeriwala R, Zohdi TI (2016) A coupled discrete element-finite difference model of selective laser sintering. Granul Matter 18(2):21CrossRefGoogle Scholar
  15. 15.
    Gingold RA, Monaghan JJ (1977) Smoothed particle hydrodynamics: theory and application to non-spherical stars. Mon Not R Astron Soc 181(3):375–389CrossRefGoogle Scholar
  16. 16.
    Gu D, Chen H (2018) Selective laser melting of high strength and toughness stainless steel parts: the roles of laser hatch style and part placement strategy. Mater Sci Eng A 725:419–427.  https://doi.org/10.1016/j.msea.2018.04.046 CrossRefGoogle Scholar
  17. 17.
    Gu DD, Meiners W, Wissenbach K, Poprawe R (2013) Laser additive manufacturing of metallic components: materials, processes and mechanisms. Int Mater Rev 57(3):133–164.  https://doi.org/10.1179/1743280411Y.0000000014 CrossRefGoogle Scholar
  18. 18.
    Gusarov A, Kruth JP (2005) Modelling of radiation transfer in metallic powders at laser treatment. Int J Heat Mass Transf 48(16):3423–3434CrossRefGoogle Scholar
  19. 19.
    Gusarov AV, Yadroitsev I, Bertrand P, Smurov I (2009) Model of radiation and heat transfer in laser–powder interaction zone at selective laser melting. J Heat Transf 131(7):072101.  https://doi.org/10.1115/1.3109245 CrossRefGoogle Scholar
  20. 20.
    Hashemi H, Sliepcevich C (1967) A numerical method for solving two-dimensional problems of heat conduction with change of phase. Chem Eng Prog Symp Ser 63:34–41Google Scholar
  21. 21.
    He X, Fuerschbach PW, DebRoy T (2003) Heat transfer and fluid flow during laser spot welding of 304 stainless steel. J Phys D Appl Phys 36(12):1388–1398.  https://doi.org/10.1088/0022-3727/36/12/306 CrossRefGoogle Scholar
  22. 22.
    Hirschler M, Oger G, Nieken U, Le Touzé D (2017) Modeling of droplet collisions using smoothed particle hydrodynamics. Int J Multiph Flow 95:175–187MathSciNetCrossRefGoogle Scholar
  23. 23.
    Hu H, Eberhard P (2017) Thermomechanically coupled conduction mode laser welding simulations using smoothed particle hydrodynamics. Comput Part Mech 4(4):473–486.  https://doi.org/10.1007/s40571-016-0140-5 CrossRefGoogle Scholar
  24. 24.
    Hu H, Fetzer F, Berger P, Eberhard P (2016) Simulation of laser welding using advanced particle methods. GAMM-Mitteilungen 39(2):149–169.  https://doi.org/10.1002/gamm.201610010 CrossRefGoogle Scholar
  25. 25.
    Hu Z, Zhu H, Zhang C, Zhang H, Qi T, Zeng X (2018) Contact angle evolution during selective laser melting. Mater Des 139:304–313.  https://doi.org/10.1016/j.matdes.2017.11.002 CrossRefGoogle Scholar
  26. 26.
    Kamath C (2016) Data mining and statistical inference in selective laser melting. Int J Adv Manuf Technol 86(5–8):1659–1677.  https://doi.org/10.1007/s00170-015-8289-2 CrossRefGoogle Scholar
  27. 27.
    Khairallah SA, Anderson AT (2014) Mesoscopic simulation model of selective laser melting of stainless steel powder. J Mater Process Technol 214(11):2627–2636.  https://doi.org/10.1016/j.jmatprotec.2014.06.001 CrossRefGoogle Scholar
  28. 28.
    Khairallah SA, Anderson AT, Rubenchik A, King WE (2016) Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones. Acta Mater 108:36–45.  https://doi.org/10.1016/j.actamat.2016.02.014 CrossRefGoogle Scholar
  29. 29.
    King WE, Anderson AT, Ferencz RM, Hodge NE, Kamath C, Khairallah SA, Rubenchik AM (2015) Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges. Appl Phys Rev 2(4):041304.  https://doi.org/10.1063/1.4937809 CrossRefGoogle Scholar
  30. 30.
    Krakhmalev P, Fredriksson G, Svensson K, Yadroitsev I, Yadroitsava I, Thuvander M, Peng R (2018) Microstructure, solidification texture, and thermal stability of 316 l stainless steel manufactured by laser powder bed fusion. Metals 8(8):643.  https://doi.org/10.3390/met8080643 CrossRefGoogle Scholar
  31. 31.
    Kruth JP, Mercelis P, van Vaerenbergh J, Froyen L, Rombouts M (2005) Binding mechanisms in selective laser sintering and selective laser melting. Rapid Prototyp J 11(1):26–36.  https://doi.org/10.1108/13552540510573365 CrossRefGoogle Scholar
  32. 32.
    Kumar S, Kruth JP (2008) Wear performance of SLS/SLM materials. Adv Eng Mater 10(8):750–753.  https://doi.org/10.1002/adem.200800075 CrossRefGoogle Scholar
  33. 33.
    Kunz P, Hassanizadeh S, Nieken U (2018) A two-phase SPH model for dynamic contact angles including fluid–solid interactions at the contact line. Transp Porous Media 122(2):253–277MathSciNetCrossRefGoogle Scholar
  34. 34.
    Lachmayer R, Lippert RB, Fahlbusch T (eds) (2016) 3D-Druck beleuchtet: additive manufacturing auf dem Weg in die Anwendung. Springer, BerlinGoogle Scholar
  35. 35.
    Lind S, Xu R, Stansby P, Rogers B (2012) Incompressible smoothed particle hydrodynamics for free-surface flows: a generalised diffusion-based algorithm for stability and validations for impulsive flows and propagating waves. J Comput Phys 231(4):1499–1523MathSciNetCrossRefGoogle Scholar
  36. 36.
    Mayrhofer A, Rogers BD, Violeau D, Ferrand M (2013) Investigation of wall bounded flows using SPH and the unified semi-analytical wall boundary conditions. Comput Phys Commun 184(11):2515–2527MathSciNetCrossRefGoogle Scholar
  37. 37.
    Mercelis P, Kruth JP (2006) Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyp J 12(5):254–265.  https://doi.org/10.1108/13552540610707013 CrossRefGoogle Scholar
  38. 38.
    Monaghan J, Rafiee A (2013) A simple SPH algorithm for multi-fluid flow with high density ratios. Int J Numer Methods Fluids 71(5):537–561MathSciNetCrossRefGoogle Scholar
  39. 39.
    Monaghan JJ (1982) Why particle methods work. SIAM J Sci Stat Comput 3(4):422–433MathSciNetCrossRefGoogle Scholar
  40. 40.
    Monaghan JJ (1992) Smoothed particle hydrodynamics. Annu Rev Astron Astrophys 30(1):543–574CrossRefGoogle Scholar
  41. 41.
    Navrotsky V (2014) 3D printing at Siemens Power Service. www.siemens.fi/pool/cc/events/elp14/esitykset/navrotsky.pdf. Accessed 12 Feb 2019
  42. 42.
    Neugebauer F, Keller N, Feuerhahn F, Koehler H (2014) Multi scale fem simulation for distortion calculation in additive manufacturing of hardening stainless steel. In: International conference on thermal forming and welding distortionGoogle Scholar
  43. 43.
    Panwisawas C, Perumal B, Ward RM, Turner N, Turner RP, Brooks JW, Basoalto HC (2017) Keyhole formation and thermal fluid flow-induced porosity during laser fusion welding in titanium alloys: experimental and modelling. Acta Mater 126:251–263.  https://doi.org/10.1016/j.actamat.2016.12.062 CrossRefGoogle Scholar
  44. 44.
    Qiu C, Panwisawas C, Ward M, Basoalto HC, Brooks JW, Attallah MM (2015) On the role of melt flow into the surface structure and porosity development during selective laser melting. Acta Mater 96:72–79.  https://doi.org/10.1016/j.actamat.2015.06.004 CrossRefGoogle Scholar
  45. 45.
    Rombouts M, Froyen L, Gusarov AV, Bentefour EH, Glorieux C (2005) Photopyroelectric measurement of thermal conductivity of metallic powders. J Appl Phys 97(2):024905.  https://doi.org/10.1063/1.1832740 CrossRefGoogle Scholar
  46. 46.
    Rosenthal D (1946) The theory of moving sources of heat and its application to metal treatments. Trans Am Soc Mech Eng 43:849–866Google Scholar
  47. 47.
    Russell MA, Souto-Iglesias A, Zohdi TI (2018) Numerical simulation of laser fusion additive manufacturing processes using the SPH method. Comput Methods Appl Mech Eng 341:163–187.  https://doi.org/10.1016/j.cma.2018.06.033 MathSciNetCrossRefGoogle Scholar
  48. 48.
    Schoinochoritis B, Chantzis D, Salonitis K (2016) Simulation of metallic powder bed additive manufacturing processes with the finite element method: a critical review. Proc Inst Mech Eng Part B J Eng Manuf 231(1):96–117.  https://doi.org/10.1177/0954405414567522 CrossRefGoogle Scholar
  49. 49.
    Sercombe T, Jones N, Day R, Kop A (2008) Heat treatment of Ti–6Al–7Nb components produced by selective laser melting. Rapid Prototyp J 14(5):300–304.  https://doi.org/10.1108/13552540810907974 CrossRefGoogle Scholar
  50. 50.
    Shepard D (1968) A two-dimensional interpolation function for irregularly-spaced data. In: Proceedings of the 1968 23rd ACM national conference. ACM, pp 517–524Google Scholar
  51. 51.
    Song B, Dong S, Liu Q, Liao H, Coddet C (2014) Vacuum heat treatment of iron parts produced by selective laser melting: microstructure, residual stress and tensile behavior. Mater Des 1980–2015(54):727–733.  https://doi.org/10.1016/j.matdes.2013.08.085 CrossRefGoogle Scholar
  52. 52.
    Szewc K, Tanière A, Pozorski J, Minier JP (2012) A study on application of smoothed particle hydrodynamics to multi-phase flows. Int J Nonlinear Sci Numer Simul 13(6):383–395MathSciNetCrossRefGoogle Scholar
  53. 53.
    Verhaeghe F, Craeghs T, Heulens J, Pandelaers L (2009) A pragmatic model for selective laser melting with evaporation. Acta Mater 57(20):6006–6012.  https://doi.org/10.1016/j.actamat.2009.08.027 CrossRefGoogle Scholar
  54. 54.
    Violeau D (2012) Fluid mechanics and the SPH method: theory and applications. Oxford University Press, OxfordCrossRefGoogle Scholar
  55. 55.
    Wendland H (1995) Piecewise polynomial, positive definite and compactly supported radial functions of minimal degree. Adv Comput Math 4(1):389–396.  https://doi.org/10.1007/BF02123482 MathSciNetCrossRefzbMATHGoogle Scholar
  56. 56.
    Wessels H, Bode T, Weißenfels C, Wriggers P, Zohdi TI (2018) Investigation of heat source modeling for selective laser melting. Comput Mech 67(2):318.  https://doi.org/10.1007/s00466-018-1631-4 CrossRefzbMATHGoogle Scholar
  57. 57.
    Wessels H, Weißenfels C, Wriggers P (2018) Metal particle fusion analysis for additive manufacturing using the stabilized optimal transportation meshfree method. Comput Methods Appl Mech Eng 339:91–114.  https://doi.org/10.1016/j.cma.2018.04.042 MathSciNetCrossRefGoogle Scholar
  58. 58.
    Withers PJ, Bhadeshia H (2001) Residual stress. part 1—measurement techniques. Mater Sci Technol 17(4):355–365.  https://doi.org/10.1179/026708301101509980 CrossRefGoogle Scholar
  59. 59.
    Withers PJ, Bhadeshia H (2001) Residual stress. Part 2—nature and origins. Mater Sci Technol 17(4):366–375.  https://doi.org/10.1179/026708301101510087 CrossRefGoogle Scholar
  60. 60.
    Yadroitsev I (2008) Selective laser melting: direct manufacturing of 3D objects by selective laser melting of metal powders. Dissertation, ENISE, Saint-EtienneGoogle Scholar
  61. 61.
    Yadroitsev I, Gusarov A, Yadroitsava I, Smurov I (2010) Single track formation in selective laser melting of metal powders. J Mater Process Technol 210(12):1624–1631CrossRefGoogle Scholar
  62. 62.
    Yan W, Ge W, Qian Y, Lin S, Zhou B, Wagner GJ, Lin F, Liu WK (2017) Multi-physics modeling of single/multiple-track defect mechanisms in electron beam selective melting. Acta Materialia 134:324–333.  https://doi.org/10.1016/j.actamat.2017.05.061 CrossRefGoogle Scholar
  63. 63.
    Yan W, Lin S, Kafka OL, Yu C, Liu Z, Lian Y, Wolff S, Cao J, Wagner GJ, Liu WK (2018) Modeling process–structure–property relationships for additive manufacturing. Front Mech Eng 13(4):482–492.  https://doi.org/10.1007/s11465-018-0505-y CrossRefGoogle Scholar
  64. 64.
    Yan W, Qian Y, Ge W, Lin S, Liu WK, Lin F, Wagner GJ (2018) Meso-scale modeling of multiple-layer fabrication process in selective electron beam melting: inter-layer/track voids formation. Mater Des 141:210–219.  https://doi.org/10.1016/j.matdes.2017.12.031 CrossRefGoogle Scholar
  65. 65.
    Yang Z (2000) Modeling weldment macro and microstructure from fundamentals of transport phenomena and phase transformation theory. PhD thesis, The Pennsylvania State University, State College, PA, USAGoogle Scholar
  66. 66.
    Zohdi TI (2010) Simulation of coupled microscale multiphysical-fields in particulate-doped dielectrics with staggered adaptive fdtd. Comput Methods Appl Mech Eng 199(49–52):3250–3269.  https://doi.org/10.1016/j.cma.2010.06.032 MathSciNetCrossRefzbMATHGoogle Scholar
  67. 67.
    Zohdi TI (2013) Rapid simulation of laser processing of discrete particulate materials. Arch Comput Methods Eng 20(4):309–325.  https://doi.org/10.1007/s11831-013-9092-6 CrossRefGoogle Scholar
  68. 68.
    Zohdi TI (2014) Additive particle deposition and selective laser processing—a computational manufacturing framework. Comput Mech 54(1):171–191.  https://doi.org/10.1007/s00466-014-1012-6 MathSciNetCrossRefGoogle Scholar
  69. 69.
    Zohdi TI (2015) On the thermal response of a surface deposited laser-irradiated powder particle. CIRP J Manuf Sci Technol 10:77–83.  https://doi.org/10.1016/j.cirpj.2015.05.001 CrossRefGoogle Scholar
  70. 70.
    Zohdi TI (2017) Construction of a rapid simulation design tool for thermal responses to laser-induced feature patterns. Comput Mech 295(7):315.  https://doi.org/10.1007/s00466-017-1503-3 MathSciNetCrossRefGoogle Scholar
  71. 71.
    Zohdi TI (2017) Modeling and simulation of laser processing of particulate-functionalized materials. Arch Comput Methods Eng 24(1):89–113.  https://doi.org/10.1007/s11831-015-9160-1 MathSciNetCrossRefzbMATHGoogle Scholar
  72. 72.
    Zohdi TI (2018) Laser-induced heating of dynamic particulate depositions in additive manufacturing. Comput Methods Appl Mech Eng 331:232–258.  https://doi.org/10.1016/j.cma.2017.11.003 MathSciNetCrossRefGoogle Scholar
  73. 73.
    Zohdi TI (2019) Ultra-fast laser-patterning computation for advanced manufacturing of powdered materials exploiting knowledge-based heat-kernels. Comput Methods Appl Mech Eng 343:234–248MathSciNetCrossRefGoogle Scholar

Copyright information

© OWZ 2019

Authors and Affiliations

  1. 1.Institute of Continuum MechanicsLeibniz University HannoverHannoverGermany

Personalised recommendations

Cite article

Buy options