Sliding friction of shale rock on dry quartz sand particles
- 36 Downloads
The sliding friction of rock, involving all kinds of particles at the contact surface, is relevant to many problems, ranging from those in artificial engineering to earthquake dynamics. In this work, the frictional performance of the shale rock–dry quartz sand contact was investigated using a self-developed testing device. The study showed that the coefficient of friction of the contact increases with nominal stress and that the corresponding friction force increases approximately linearly with nominal stress, which is directly related to the contact stress between each single sand particle and rock shale. An overall dynamic coefficient, γ, reflecting the response of friction force to nominal stress, first decreases and then increases with area ratio, which is determined by not only the contact stress but also the interparticle friction force. These have important repercussions for a preliminary understanding of the frictional properties of the shale rock–dry quartz sand contact in hydraulic fracturing and related industrial applications.
Keywordsshale rock quartz sand frictional performance hydraulic fracturing
Support by National Natural Science Foundation of China (No. 51575529) is acknowledged.
- Chen X F. Rock friction and dynamic faulting at the micro-to nano-scales. Ph.D Thesis. Norman (USA): University of Oklahoma, 2015.Google Scholar
- Morgan J K. Numerical simulations of granular shear zones using the distinct element method: 2. Effects of particle size distribution and interparticle friction on mechanical behavior. J Geophys Res: Solid Earth 104(B2): 2721–2732 (1999)Google Scholar
- Akrad O M, Miskimins J L, Prasad M. The effects of fracturing fluids on shale rock mechanical properties and proppant embedment. In SPE Annual Technical Conference and Exhibition, Denver, Colorado, USA, 2011.Google Scholar
- Dutta A K, Penumadu D. Hardness and modulus of individual sand particles using nanoindentation. In Geo-Denver 2007 Congress: New Peaks in Geotechnics, Denver, CO, 2007: 1–10.Google Scholar
Open AccessThe articles published in this journal are distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.