Advertisement

Permanent Deformation Prediction Model of Unbound Granular Materials for Flexible Pavement Design

  • Ali AlnedawiEmail author
  • Kali Prasad Nepal
  • Riyadh Al-Ameri
Technical Paper
  • 39 Downloads

Abstract

Constitutive prediction models in flexible pavement are used to predict the permanent deformation (PD) of the unbound granular materials (UGMs). The most recent flexible pavement structural design guide in Australia does not consider the response of the UGMs layers as a design criterion. Additionally, it referred to the absence of an appropriate prediction model. The available prediction models have complex equations with many variables; the use of some of which has been found to be unsuitable in Australia. Thus, the aim of this study was to develop a new simple constitutive model based on an empirical regression equation, which has two predictor variables and four regression parameters. Repeated load triaxial test data covering many loading cycles and stages of stresses were used in order to validate the proposed model by calibration. The tested materials, specified by VicRoads as high-quality base and subbase crushed rocks, were used to prepare 46 samples with a range of moisture contents, gradations, densities, and stress conditions. Additional validation was conducted by predicting the PD response of recycled crushed concrete for different stress conditions. The proposed model excellently matches the experimental PDs with the sum of squared error less than 0.060 and R2 more than 0.96 over the tested matrix for both the crushed rocks and recycled concrete. This high prediction accuracy could lead to a better design of pavement materials and their thicknesses. A new update is proposed for the current Austroads flexible pavements design procedure by involving two more critical locations as performance criteria in the base and subbase layers based on the developed constitutive model. Adopting the proposed model can better generalise the design procedure to determine the accumulated vertical PD for the whole layer system.

Keywords

Flexible pavement Unbound granular materials Repeated load triaxial test Permanent deformation Constitutive models 

Notes

Acknowledgments

The authors acknowledge the support of Ground Science South West Pty. Ltd. by providing the unbound granular materials in this study.

References

  1. 1.
    Alnedawi, A., Nepal, K. P. and Al-Ameri, R.: A comparison study between basalt and granite crushed rocks under repeated traffic loads. The First MoHESR and HCED Iraqi Scholars Conference in Australasia. Melbourne, Australia (2017)Google Scholar
  2. 2.
    Alnedawi, A., Nepal, K.P., Al-Ameri, R.: Mechanistic behavior of open and dense graded unbound granular materials under traffic loads. International Journal of GEOMATE. 14, 124–129 (2018a)CrossRefGoogle Scholar
  3. 3.
    Alnedawi, A., Nepal K. P., al-Ameri R., Alabdullah M.: Effect of vertical stress rest period on deformation behaviour of unbound granular materials: experimental and numerical investigations. J. Rock Mech. Geotech. Eng. (2018b)Google Scholar
  4. 4.
    Australian Standard: Soil Compaction and Density Tests-Determination of the Dry Density/Moisture Content Relation of a Soil Using Modified Compactive Effort. Sydney, Australia: Standards Australia (2003)Google Scholar
  5. 5.
    Austroads: Austroads repeated load triaxial test method: determination of permanent deformation and resilient modulus characteristics of unbound granular materials under drained conditions, AG-PT/T053. Austroads Publication, 1–29 (2007)Google Scholar
  6. 6.
    Austroads: Guide to pavement technology / part 2: pavement structural design. 100–102 (2017)Google Scholar
  7. 7.
    Azam, A.M., Cameron, D.A., Rahman, M.M.: Permanent strain of unsaturated unbound granular materials from construction and demolition waste. J. Mater. Civ. Eng. 27(3), 04014125 (2015)CrossRefGoogle Scholar
  8. 8.
    Barksdale, R. D.: Laboratory evaluation of rutting in base course materials. ed. Presented at the Third International Conference on the Structural Design of Asphalt Pavements, Grosvenor House, Park Lane, London, England, Sept. 11-15, 1972., (1972)Google Scholar
  9. 9.
    Berthelot, C., Podborochynski, D., Marjerison, B., Gerbrandt, R.: Saskatchewan field case study of triaxial frequency sweep characterization to predict failure of a granular base across increasing fines content and traffic speed applications. J. Transp. Eng. 135(11), 907–914 (2009)CrossRefGoogle Scholar
  10. 10.
    Erlingsson, S., Rahman, M.S.: Evaluation of permanent deformation characteristics of unbound granular materials by means of multistage repeated-load triaxial tests. Transp. Res. Rec. 2369, 11–19 (2013)CrossRefGoogle Scholar
  11. 11.
    Gabr, A., Cameron, D.: Permanent strain modeling of recycled concrete aggregate for unbound pavement construction. J. Mater. Civ. Eng. 25(10), 1394–1402 (2012)CrossRefGoogle Scholar
  12. 12.
    Gu, F., Zhang, Y., Droddy, C.V., Luo, R., Lytton, R.L.: Development of a new mechanistic empirical rutting model for unbound granular material. J. Mater. Civ. Eng. 28, 04016051 (2016)CrossRefGoogle Scholar
  13. 13.
    Haider, I., Kaya, Z., Cetin, A., Hatipoglu, M., Cetin, B., Aydilek, A.H.: Drainage and mechanical behavior of highway base materials. J. Irrig. Drain. Eng. 140(6), 04014012 (2014)CrossRefGoogle Scholar
  14. 14.
    Huurman, M.: Permanent deformation in concrete block pavements. Civil Engineering and Geosciences, PhD (1997)Google Scholar
  15. 15.
    Huvstig, A.: Model for the prediction of rutting in roads, a NordFoU result. Procedia Soc. Behav. Sci. 48, 2816–2826 (2012)CrossRefGoogle Scholar
  16. 16.
    Korkiala-Tanttu, L.: A new material model for permanent deformations in pavements. ed. Proceedings of the 7th Conference on Bearing Capacity of Roads and Airfields, Trondheim, Norway (2005)Google Scholar
  17. 17.
    Koseki, J., Mikami, T., Sato, T.: Deformation characteristics of granular materials in cyclic one-dimensional loading tests. Transportation Infrastructure Geotechnology. 1(1), 54–67 (2014)CrossRefGoogle Scholar
  18. 18.
    Leiva-Villacorta, F., Vargas-Nordcbeck, A., Aguiar-Moya, J.P.: Permanent deformation and deflection relationship from pavement condition assessment. International Journal of Pavement Research and Technology. 10(4), 352–359 (2017)CrossRefGoogle Scholar
  19. 19.
    Lekarp, F., Isacsson, U., Dawson, A.: State of the art.II: permanent strain response of unbound aggregates. J. Transp. Eng. 126(1), 76–83 (2000)CrossRefGoogle Scholar
  20. 20.
    Luo, X., Gu, F., Zhang, Y., Lytton, R.L., Zollinger, D.: Mechanistic-empirical models for better consideration of subgrade and unbound layers influence on pavement performance. Transportation Geotechnics. 13, 52–68 (2017)CrossRefGoogle Scholar
  21. 21.
    Pratibha, R., Sivakumar Babu, G.L., Madhavi Latha, G.: Stress–strain response of unbound granular materials under static and cyclic loading. Indian Geotechnical Journal. 45(4), 449–457 (2015)CrossRefGoogle Scholar
  22. 22.
    Qamhia, I.I.A., Chow, L.C., Mishra, D., Tutumluer, E.: Dense-graded aggregate base gradation influencing rutting model predictions. Transportation Geotechnics. 13, 43–51 (2017)CrossRefGoogle Scholar
  23. 23.
    Qiao, Y., Dawson, A., Huvstig, A., Korkiala-Tanttu, L.: Calculating rutting of some thin flexible pavements from repeated load triaxial test data. International Journal of Pavement Engineering. 16(6), 467–476 (2015)CrossRefGoogle Scholar
  24. 24.
    Rahman, M. S.: Characterising the deformation behaviour of unbound granular materials in pavement structures. TRITA-TSC-PHD (PhD) (2015)Google Scholar
  25. 25.
    Rahman, M.S., Erlingsson, S.: A model for predicting permanent deformation of unbound granular materials. Road Materials and Pavement Design. 16(3), 653–673 (2015a)CrossRefGoogle Scholar
  26. 26.
    Rahman, M.S., Erlingsson, S.: Predicting permanent deformation behaviour of unbound granular materials. International Journal of Pavement Engineering. 16(7), 587–601 (2015b)CrossRefGoogle Scholar
  27. 27.
    Rasul, J.M., Ghataora, G.S., Burrow, M.P.: The effect of wetting and drying on the performance of stabilized subgrade soils. Transportation Geotechnics. 14(1–7), 1–7 (2018)CrossRefGoogle Scholar
  28. 28.
    Romanoschi, S.A.: Empirical models for permanent deformation of subgrade soils from the data collected at the pavement subgrade performance study. J. Mater. Civ. Eng. 29(3), 04016236 (2016)CrossRefGoogle Scholar
  29. 29.
    Siripun, K., Jitsangiam, P., Nikraz, H.: Permanent deformation behaviour and model of crushed rock base. Aust. J. Civ. Eng. 8(1), 41–52 (2010)CrossRefGoogle Scholar
  30. 30.
    Sweere, G. T. H., 1990. Unbound Granular Bases for Roads. Technische Universitiet DelftGoogle Scholar
  31. 31.
    Theyse, H., De Beer, M., Rust, F.: Overview of south African mechanistic pavement design method. Transportation Research Record: Journal of the Transportation Research Board. 1539, 6–17 (1996)CrossRefGoogle Scholar
  32. 32.
    Tutumluer, E., Pan, T.: Aggregate morphology affecting strength and permanent deformation behavior of unbound aggregate materials. J. Mater. Civ. Eng. 20(9), 617–627 (2008)CrossRefGoogle Scholar
  33. 33.
    VicRoads: Section 812 - Crushed Rock for Pavement Base and Subbase. Australia: Roads Corporation of Victoria (VicRoads), 13 (2011)Google Scholar
  34. 34.
    Werkmeister, S.: Permanent Deformation Behaviour of Unbound Granular Materials in Pavement Constructions (2003)Google Scholar
  35. 35.
    Werkmeister, S., Dawson, A.R., Wellner, F.: Permanent deformation behaviour of granular materials. Road Materials and Pavement Design. 6(1), 31–51 (2005)CrossRefGoogle Scholar
  36. 36.
    Witczak, M. and Uzan, J.: The Universal Airport Design System, Report I of IV: Granular Material Characterization. Department of Civil Engineering, University of Maryland, College Park (1988)Google Scholar
  37. 37.
    Wolff, H. and Visser, A.: Incorporating elasto-plasticity in granular layer pavement design. ed. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, 177A (1995)Google Scholar
  38. 38.
    Wu, Z. and Yang, X.: Evaluation of the MEPDG permanent deformation models in Louisiana conditions. GeoCongress 2012: State of the Art and Practice in Geotechnical Engineering. 1438–1447 (2012)Google Scholar
  39. 39.
    Xiao, Y., Tutumluer E., Qian Y., Siekmeier J. A.: Gradation effects influencing mechanical properties of aggregate base-granular subbase materials in Minnesota. Transportation Research Record: Journal of the Transportation Research Board, (2267), 14–26 (2012)Google Scholar
  40. 40.
    Xiao, Y., Tutumluer, E. and Siekmeier, J.: Resilient modulus behavior estimated from aggregate source properties. Geo-Frontiers 2011: Advances in Geotechnical Engineering. 4843–4852 (2011)Google Scholar
  41. 41.
    Yang, X., Han, J.: Analytical model for resilient modulus and permanent deformation of geosynthetic-reinforced unbound granular material. J. Geotech. Geoenviron. 139(9), 1443–1453 (2012)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.School of EngineeringDeakin UniversityGeelongAustralia

Personalised recommendations