Advertisement

Advances in Manufacturing

, Volume 7, Issue 4, pp 401–410 | Cite as

Residual stress model of pre-stressed dry grinding considering coupling of thermal, stress, and phase transformation

  • Xiao-Liang ShiEmail author
  • Shi-Chao Xiu
  • Hui-Ling Su
Article
  • 48 Downloads

Abstract

Pre-stressed dry grinding can result in a hardened layer on the part surface while the surface residual stress is controlled. Considering the factors of the thermal field, pre-stress, and microstructural transformation, a proximate model of surface residual stress for pre-stressed dry grinding is established using the ANSYS finite element simulation method and verified through experiment. The variation laws and mechanisms of the residual stress along with the grinding parameters are revealed. Under the comprehensive effect of pre-stress and phase transformation, the residual stress of pre-stressed dry grinding is revealed mainly as compressive stress. This increases as the pre-stress and grinding depth increase. Under the coupling effect, pre-stress has larger influence on the residual stress than the grinding depth. The model can analyze and predict the residual stress of pre-stressed dry grinding in general.

Keywords

Pre-stressed dry grinding Residual stress Finite element model Grinding thermal field Stress field Phase transformation 

Notes

Acknowledgements

This paper is supported by the Fundamental Research Funds for the Central Universities of China (Grant No. N170303012) and the National Natural Science Foundation of China (Grant No. 51775101).

References

  1. 1.
    Zarudi I, Zhang LC (2002) Mechanical property improvement of quenchable steel by grinding. J Mater Sci 37(18):3935–3943CrossRefGoogle Scholar
  2. 2.
    Thanedar A, Dongre GG, Singh R et al (2017) Surface integrity investigation including grinding burns using Barkhausen noise (BNA). J Manuf Process 30:226–240CrossRefGoogle Scholar
  3. 3.
    Thang VT, Tuan NA, Tiep NV (2018) Evaluation of grinding wheel wear in wet profile grinding for the groove of the ball bearing’s inner ring by pneumatic probes. J Mech Sci Technol 32(3):1297–1305CrossRefGoogle Scholar
  4. 4.
    Zhang YB, Li CH, Jia DZ et al (2016) Experimental study on the effect of nanoparticle concentration on the lubricating property of nanofluids for MQL grinding of Ni-based alloy. J Mater Process Technol 232:100–115CrossRefGoogle Scholar
  5. 5.
    Salonitis K (2017) A hybrid cellular automata-finite element model for the simulation of the grind-hardening process. Int J Adv Manuf Technol 93(9/12):4007–4013CrossRefGoogle Scholar
  6. 6.
    Nguyen T, Zhang LC, Sun DL et al (2014) Characterizing the mechanical properties of the hardened layer induced by grinding-hardening. Mach Sci Technol 18(2):277–298CrossRefGoogle Scholar
  7. 7.
    Huang XM, Ren YH, Zheng B et al (2016) Experiment research on grind-hardening of AISI5140 steel based on thermal compensation. J Mech Sci Technol 30(8):3819–3827CrossRefGoogle Scholar
  8. 8.
    Liu M, Nguyen T, Zhang LC et al (2015) Effect of grinding-induced cyclic heating on the hardened layer generation in the plunge grinding of a cylindrical component. Int J Mach Tools Manuf 89:55–63CrossRefGoogle Scholar
  9. 9.
    Alonso U, Ortega N, Sanchez JA et al (2015) Hardness control of grind-hardening and finishing grinding by means of area-based specific energy. Int J Mach Tools Manuf 88:24–33CrossRefGoogle Scholar
  10. 10.
    Li JP, Liu SY, Du CL (2013) Experimental research and computer simulation of face grind-hardening technology. Stroj Vestn J Mech E 59(2):81–88CrossRefGoogle Scholar
  11. 11.
    Zhang Y, Ge PQ, Be WB (2015) Plane grind-hardening distortion analysis and the effect to grind-hardening layer. Int J Adv Manuf Technol 78(1/4):431–438CrossRefGoogle Scholar
  12. 12.
    Ye BY, Peng RT, Tang XZ et al (2008) Residual stress and surface morphology of pre-stress hard cutting. J South China Univ Technol 36(4):6–9Google Scholar
  13. 13.
    Xiu SC, Bai B, Zhang XM et al (2015) Study of the surface hardening in pre-stressed hardening grinding combined machining. J Northeast Univ 36(1):86–90Google Scholar
  14. 14.
    Xiu SC, Shi XL (2015) Transformation mechanism of microstructure and residual stress within hardening layer in pre-stressed dry grinding. J Adv Mech Des Syst 9(3):1–13Google Scholar
  15. 15.
    Shi XL, Xiu SC, Dong L (2018) Study of pre-stressed dry grinding and its integrated hardening model of hardening layer. Int J Adv Manuf Technol 95(5/8):2529–2541CrossRefGoogle Scholar
  16. 16.
    Shi XL, Xiu SC, Zhang XM et al (2017) A study of pre-stressed dry grinding and its characteristic mechanism of residual stress within a hardened layer. Int J Adv Manuf Technol 88(1/4):863–877CrossRefGoogle Scholar
  17. 17.
    Ding ZS, Li BZ, Liang SY (2015) Phase transformation and residual stress of maraging C250 steel during grinding. Mater Lett 154:37–39CrossRefGoogle Scholar
  18. 18.
    Masoumi H, Safavi SM, Salehi M et al (2014) Effect of grinding on the residual stress and adhesion strength of HVOF thermally sprayed WC-10Co-4Cr coating. Mater Manuf Process 29(9):1139–1151CrossRefGoogle Scholar
  19. 19.
    Salonitis K, Kolios A (2015) Experimental and numerical study of grind-hardening-induced residual stresses on AISI 1045 steel. Int J Adv Manuf Technol 79(9/12):1443–1452CrossRefGoogle Scholar
  20. 20.
    Martell JJ, Liu CR, Shi J (2014) Experimental investigation on variation of machined residual stresses by turning and grinding of hardened AISI 1053 steel. Int J Adv Manuf Technol 74(9/12):1381–1392CrossRefGoogle Scholar
  21. 21.
    Evans A, Kim SB, Shackleton J et al (2005) Relaxation of residual stress in shot peened Udimet 720Li under high temperature isothermal fatigue. Int J Fatigue 27(10/12):1530–1534CrossRefGoogle Scholar
  22. 22.
    Guo C, Wu Y, Varghese V et al (1999) Temperatures and energypartition for grinding with vitrified CBN wheels. Ann CIRP 48:247–250CrossRefGoogle Scholar
  23. 23.
    Tang JM (2016) Mechanical and tribological properties of the TiC-TiB2 composite coating deposited on 40Cr-steel by electro spark deposition. Appl Surf Sci 365:202–208CrossRefGoogle Scholar
  24. 24.
    Hu CL, Zhao Z, Gong AJ et al (2015) Effect of warm deformation parameters and cooling rates on the recrystallization transformation microstructure in 40Cr steel. J Mater Eng Perform 24(1):505–516CrossRefGoogle Scholar
  25. 25.
    Chen Y, Peng Z, Wu L et al (2015) High-precision numerical simulation for effect of casting speed on solidification of 40Cr during continuous billet casting. Metall Ital 1:47–51Google Scholar
  26. 26.
    Zhang L, Ge PQ, Bi WB et al (2011) Experiment and simulation on residual stress of surface hardened layer in grind-hardening. Solid Stat Phenom 175:166–170CrossRefGoogle Scholar

Copyright information

© Shanghai University and Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  1. 1.School of Mechanical Engineering and AutomationNortheastern UniversityShenyangPeople’s Republic of China
  2. 2.School of MetallurgyNortheastern UniversityShenyangPeople’s Republic of China

Personalised recommendations