Advertisement

Mixed-mode computation of the transient dynamic stress intensity factor for multiple interface cracks

  • A. Jafari
  • M. M. MonfaredEmail author
  • R. Bagheri
Technical Paper
  • 19 Downloads

Abstract

In this paper, the transient dynamic stress intensity factors are estimated for multiple cracks which are located at the interface between a nonhomogeneous elastic half-plane and an elastic half-plane. The material properties of the nonhomogeneous half-plane vary continuously in the y-direction. First, Laplace and Fourier transforms are applied to reduce the mixed boundary value problem to a system of singular integral equations with Cauchy kernels which are solved numerically. By numerical Laplace inversion technique, the dislocation density on the crack faces is obtained and then transient dynamic stress intensity factors at crack tips have been determined. For validity and accuracy of the method, the results are compared with other references and very good agreement is shown. The influences of nonhomogeneity parameters, crack length, the variation in time and the interaction between of cracks on the transient dynamic stress intensity factors are studied. It is observed that the mode I stress intensity factors decrease regularly with increasing the FG constant and the results are briefly discussed.

Keywords

Multiple interface cracks Two dissimilar half-planes Mixed-mode transient dynamic stress intensity factors Functionally graded materials Dislocation densities 

Notes

References

  1. 1.
    Delale F, Erdogan F (1988) On the mechanical modeling of the interfacial region in bonded half-planes. J Appl Mech 55(2):317–324CrossRefGoogle Scholar
  2. 2.
    Hutchinson JW, Suo Z (1991) Mixed mode cracking in layered materials. Adv Appl Mech 29:63–191Google Scholar
  3. 3.
    Konda N, Erdogan F (1994) The mixed mode crack problem in a nonhomogeneous elastic medium. Eng Fract Mech 47(4):533–545CrossRefGoogle Scholar
  4. 4.
    Itou S, Haliding H (1997) Dynamic stress intensity factors around two parallel cracks in an infinite-orthotropic plane subjected to incident harmonic stress waves. Int J Solids Struct 34(9):1145–1165CrossRefGoogle Scholar
  5. 5.
    Ikeda T, Miyazaki N, Soda T (1998) Mixed mode fracture criterion of interface crack between dissimilar materials. Eng Fract Mech 59(6):725–735CrossRefGoogle Scholar
  6. 6.
    Kadioğlu S, Dag S, Yahsi S (1998) Crack problem for a functionally graded layer on an elastic foundation. Int J Fract 94(1):63–77CrossRefGoogle Scholar
  7. 7.
    Jiang L, Wang X (2002) On the dynamic crack propagation in an interphase with spatially varying elastic properties under inplane loading. Int J Fract 114(3):225–244CrossRefGoogle Scholar
  8. 8.
    Chen J, Liu Z, Zou Z (2002) Transient internal crack problem for a nonhomogeneous orthotropic strip (Mode I). Int J Eng Sci 40(15):1761–1774CrossRefGoogle Scholar
  9. 9.
    Feng W, Zhang Z, Zou Z (2003) Impact failure prediction of Mode III crack in orthotropic functionally graded strip. Theor Appl Fract Mech 40(1):97–104CrossRefGoogle Scholar
  10. 10.
    Guo LC, Wu LZ, Ma L (2004) The dynamic fracture behavior of a functionally graded coating–substrate system. Compos Struct 64(3):433–441CrossRefGoogle Scholar
  11. 11.
    Dag S, Yildirim B, Erdogan F (2004) Interface crack problems in graded orthotropic media: analytical and computational approaches. Int J Fract 130(1):471–496CrossRefGoogle Scholar
  12. 12.
    Chen J, Liu Z (2005) Transient response of a mode III crack in an orthotropic functionally graded strip. Eur J Mech A Solids 24(2):325–336CrossRefGoogle Scholar
  13. 13.
    Wang BL, Mai YW (2006) A periodic array of cracks in functionally graded materials subjected to transient loading. Int J Eng Sci 44(5):351–364CrossRefGoogle Scholar
  14. 14.
    Dong LY, Bin J, Nan Z, Qiang TL, Yao D (2006) Dynamic stress intensity factor of the weak/micro-discontinuous interface crack of a FGM coating. Int J Solids Struct 43(16):4795–4809CrossRefGoogle Scholar
  15. 15.
    Dag S, Ilhan KA (2008) Mixed-mode fracture analysis of orthotropic functionally graded material coatings using analytical and computational methods. J Appl Mech 75(5):051104CrossRefGoogle Scholar
  16. 16.
    Itou S (2015) Dynamic stress intensity factors around three parallel cracks in an infinite medium during a passage of impact normal stresses. Acta Mech 226(7):2407MathSciNetCrossRefGoogle Scholar
  17. 17.
    Itou S (1980) Transient response of a finite crack in a strip with stress-free edges. J Appl Mech 47(4):801–805MathSciNetCrossRefGoogle Scholar
  18. 18.
    Monfared MM, Ayatollahi M (2016) Multiple crack problems in nonhomogeneous orthotropic planes under mixed mode loading conditions. Eng Fract Mech 155:1–17CrossRefGoogle Scholar
  19. 19.
    Monfared MM, Bagheri R (2016) Multiple interacting arbitrary shaped cracks in an FGM plane. Theor Appl Fract Mech 86:161–170CrossRefGoogle Scholar
  20. 20.
    Monfared MM, Ayatollahi M, Mousavi SM (2016) The mixed-mode analysis of a functionally graded orthotropic half-plane weakened by multiple curved cracks. Arch Appl Mech 86(4):713–728CrossRefGoogle Scholar
  21. 21.
    Monfared MM, Bagheri R, Yaghoubi R (2018) The mixed mode analysis of arbitrary configuration of cracks in an orthotropic FGM strip using the distributed edge dislocations. Int J Solids Struct 130:21–35CrossRefGoogle Scholar
  22. 22.
    Stehfest H (1970) Algorithm 368: numerical inversion of Laplace transforms [D5]. Commun ACM 13(1):47–49CrossRefGoogle Scholar
  23. 23.
    Sourki R, Ilyaei S, Bastanfar M, Monfared MM (2018) Multiple cracks analysis in a FG orthotropic layer with FGPM coating under anti-plane loading. J Braz Soc Mech Sci Eng 40(6):309CrossRefGoogle Scholar
  24. 24.
    Peyman S, Ghajar R, Irani S (2019) Computation of dynamic stress intensity factors for cracks in three-dimensional functionally graded solids. Proc Inst Mech Eng Part L J Mater Des Appl 233(5):862–873Google Scholar
  25. 25.
    Bueckner H (1958) The propagation of cracks and the energy of elastic deformation. Trans ASME Ser E 80(6):1225–1230Google Scholar
  26. 26.
    Baghestani AM, Fotuhi AR, Fariborz SJ (2013) Multiple interacting cracks in an orthotropic layer. Arch Appl Mech 83(11):1549–1567CrossRefGoogle Scholar
  27. 27.
    Sih G, Embley G, Ravera R (1972) Impact response of a finite crack in plane extension. Int J Solids Struct 8(7):977–993CrossRefGoogle Scholar
  28. 28.
    Mottale H, Monfared MM, Bagheri R (2018) The multiple parallel cracks in an orthotropic non-homogeneous infinite plane subjected to transient in-plane loading. Eng Fract Mech 199:220–234CrossRefGoogle Scholar
  29. 29.
    Chen YF, Erdogan F (1996) The interface crack problem for a nonhomogeneous coating bonded to a homogeneous substrate. J Mech Phys Solids 44(5):771–787CrossRefGoogle Scholar

Copyright information

© The Brazilian Society of Mechanical Sciences and Engineering 2019

Authors and Affiliations

  1. 1.Department of Mechanical Engineering, Hashtgerd BranchIslamic Azad UniversityHashtgerdIran
  2. 2.Department of Mechanical Engineering, Mechatronics Faculty, Karaj BranchIslamic Azad UniversityKarajIran

Personalised recommendations