Advertisement

Analytical solution of low-velocity impact of graphene-reinforced composite functionally graded cylindrical shells

  • Z. X. LeiEmail author
  • L. H. Tong
Technical Paper
  • 38 Downloads

Abstract

In this paper, low-velocity impact behavior of graphene-reinforced composite functionally graded (GRC-FG) cylindrical shells in thermal environments ia investigated analytically. The effective temperature-dependent material properties of the GRC-FG cylindrical shells are evaluated based on the extended Halpin–Tsai micromechanical model. The contact process follows a linearized contact law which is used to obtain a linearized contact coefficient, and Fourier series expansion and Laplace transforms are utilized during the solving process. The analytical expression of transverse displacement of GRC-FG cylindrical shells is furnished. The motion equations of the GRC-FG cylindrical shells are established based on Reddy’s third-order shear deformation theory (HSDT). The numerical results illustrate the influences of graphene distribution, temperature variation, geometric parameters, impactor mass and different impactor velocities on the central deflection of the GRC-FG cylindrical shells as well as the contact force between the GRC-FG cylindrical shells and the impactor.

Keywords

Impact Graphene HSDT Extended Halpin–Tsai model Analytical modeling 

Notes

Acknowledgements

The research described in this paper was financially supported by the National Natural Science Foundation of China (Grant No. 11702138), Natural Science Foundation of Jiangsu Province (Grant No. BK20150766) and the Fundamental Research Funds for the Central Universities (No. 30916011341).

References

  1. 1.
    Novoselov KS, Geim AK, Morozov SV, Jiang D, Zhang Y, Dubonos SV et al (2004) Electric field effect in atomically thin carbon films. Science 306(5696):666CrossRefGoogle Scholar
  2. 2.
    Novoselov KS, Jiang D, Schedin F, Booth TJ, Khotkevich VV, Morozov SV et al (2005) Two-dimensional atomic crystals. Proc Natl Acad Sci USA 102(30):10451CrossRefGoogle Scholar
  3. 3.
    Stankovich S, Dikin DA, Dommett GHB, Kohlhaas KM, Zimney EJ, Stach EA et al (2006) Graphene-based composite materials. Nature 442:282CrossRefGoogle Scholar
  4. 4.
    Potts JR, Dreyer DR, Bielawski CW, Ruoff RS (2011) Graphene-based polymer nanocomposites. Polymer 52(1):5–25CrossRefGoogle Scholar
  5. 5.
    Hu K, Kulkarni DD, Choi I, Tsukruk VV (2014) Graphene-polymer nanocomposites for structural and functional applications. Prog Polym Sci 39(11):1934–1972CrossRefGoogle Scholar
  6. 6.
    Rafiee MA, Rafiee J, Yu ZZ, Koratkar N (2009) Buckling resistant graphene nanocomposites. Appl Phys Lett 95(22):223103CrossRefGoogle Scholar
  7. 7.
    Shen H-S (2009) Nonlinear bending of functionally graded carbon nanotube-reinforced composite plates in thermal environments. Compos Struct 91(1):9–19CrossRefGoogle Scholar
  8. 8.
    Wu HL, Yang J, Kitipornchai S (2016) Imperfection sensitivity of postbuckling behaviour of functionally graded carbon nanotube-reinforced composite beams. Thin-Walled Struct 108:225–233CrossRefGoogle Scholar
  9. 9.
    Mehri M, Asadi H, Wang Q (2016) On dynamic instability of a pressurized functionally graded carbon nanotube reinforced truncated conical shell subjected to yawed supersonic airflow. Compos Struct 153:938–951CrossRefGoogle Scholar
  10. 10.
    Alibeigloo A (2016) Elasticity solution of functionally graded carbon nanotube-reinforced composite cylindrical panel subjected to thermo mechanical load. Compos B Eng 87:214–226CrossRefGoogle Scholar
  11. 11.
    Song ZG, Zhang LW, Liew KM (2016) Active vibration control of CNT-reinforced composite cylindrical shells via piezoelectric patches. Compos Struct 158:92–100CrossRefGoogle Scholar
  12. 12.
    Song ZG, Zhang LW, Liew KM (2016) Aeroelastic analysis of CNT reinforced functionally graded composite panels in supersonic airflow using a higher-order shear deformation theory. Compos Struct 141:79–90CrossRefGoogle Scholar
  13. 13.
    Song ZG, Zhang LW, Liew KM (2016) Vibration analysis of CNT-reinforced functionally graded composite cylindrical shells in thermal environments. Int J Mech Sci 115–116:339–347CrossRefGoogle Scholar
  14. 14.
    Song ZG, Zhang LW, Liew KM (2016) Active vibration control of CNT reinforced functionally graded plates based on a higher-order shear deformation theory. Int J Mech Sci 105:90–101CrossRefGoogle Scholar
  15. 15.
    Asadi H (2017) Numerical simulation of the fluid-solid interaction for CNT reinforced functionally graded cylindrical shells in thermal environments. Acta Astronaut 138:214–224CrossRefGoogle Scholar
  16. 16.
    Duc ND, Cong PH, Tuan ND, Tran P, Thanh NV (2017) Thermal and mechanical stability of functionally graded carbon nanotubes (FG CNT)-reinforced composite truncated conical shells surrounded by the elastic foundations. Thin-Walled Struct 115:300–310CrossRefGoogle Scholar
  17. 17.
    Zghal S, Frikha A, Dammak F (2018) Free vibration analysis of carbon nanotube-reinforced functionally graded composite shell structures. Appl Math Model 53:132–155MathSciNetCrossRefGoogle Scholar
  18. 18.
    Zhang LW, Memar Ardestani M, Liew KM (2017) Isogeometric approach for buckling analysis of CNT-reinforced composite skew plates under optimal CNT-orientation. Compos Struct 163:365–384CrossRefGoogle Scholar
  19. 19.
    Zhang LW, Liu WH, Liew KM (2016) Geometrically nonlinear large deformation analysis of triangular CNT-reinforced composite plates. Int J Non-linear Mech 86:122–132CrossRefGoogle Scholar
  20. 20.
    Zhang LW, Liew KM, Jiang Z (2016) An element-free analysis of CNT-reinforced composite plates with column supports and elastically restrained edges under large deformation. Compos B Eng 95:18–28CrossRefGoogle Scholar
  21. 21.
    Zhang LW, Liew KM, Reddy JN (2016) Postbuckling behavior of bi-axially compressed arbitrarily straight-sided quadrilateral functionally graded material plates. Comput Methods Appl Mech Eng 300:593–610MathSciNetCrossRefGoogle Scholar
  22. 22.
    Zhang LW, Song ZG, Liew KM (2017) Modeling aerothermoelastic properties and active flutter control of nanocomposite cylindrical shells in supersonic airflow under thermal environments. Comput Methods Appl Mech Eng 325:416–433MathSciNetCrossRefGoogle Scholar
  23. 23.
    García-Macías E, Rodríguez-Tembleque L, Sáez A (2018) Bending and free vibration analysis of functionally graded graphene vs. carbon nanotube reinforced composite plates. Compos Struct 186:123–138CrossRefGoogle Scholar
  24. 24.
    Shen H-S, Xiang Y, Fan Y, Hui D (2018) Nonlinear vibration of functionally graded graphene-reinforced composite laminated cylindrical panels resting on elastic foundations in thermal environments. Compos B Eng 136:177–186CrossRefGoogle Scholar
  25. 25.
    Lei Z, Su Q, Zeng H, Zhang Y, Yu C (2018) Parametric studies on buckling behavior of functionally graded graphene-reinforced composites laminated plates in thermal environment. Compos Struct 202:695–709CrossRefGoogle Scholar
  26. 26.
    Shen H-S, Xiang Y (2018) Postbuckling of functionally graded graphene-reinforced composite laminated cylindrical shells subjected to external pressure in thermal environments. Thin-Walled Struct 124:151–160CrossRefGoogle Scholar
  27. 27.
    Das TK, Prusty S (2013) Graphene-based polymer composites and their applications. Polym Plast Technol Eng 52(4):319–331CrossRefGoogle Scholar
  28. 28.
    Wu J, Becerril HA, Bao Z, Liu Z, Chen Y, Peumans P (2008) Organic solar cells with solution-processed graphene transparent electrodes. Appl Phys Lett 92(26):263302CrossRefGoogle Scholar
  29. 29.
    El-Kady MF, Kaner RB (2013) Scalable fabrication of high-power graphene micro-supercapacitors for flexible and on-chip energy storage. Nat Commun 4:1475CrossRefGoogle Scholar
  30. 30.
    Sadasivuni KK, Kafy A, Kim H-C, Ko H-U, Mun S, Kim J (2015) Reduced graphene oxide filled cellulose films for flexible temperature sensor application. Synth Met 206:154–161CrossRefGoogle Scholar
  31. 31.
    Timoshenko SP (1913) Zur Frage nach der Wirkung eines Stosses auf einen Balken. Zeitschrift für Mathematik und Physik. 62(2):198–209zbMATHGoogle Scholar
  32. 32.
    He W, Liu J, Wang S, Xie D (2018) Low-velocity impact response and post-impact flexural behaviour of composite sandwich structures with corrugated cores. Compos Struct 189:37–53CrossRefGoogle Scholar
  33. 33.
    Mars J, Chebbi E, Wali M, Dammak F (2018) Numerical and experimental investigations of low velocity impact on glass fiber-reinforced polyamide. Compos B Eng 146:116–123CrossRefGoogle Scholar
  34. 34.
    Chen Y, Hou S, Fu K, Han X, Ye L (2017) Low-velocity impact response of composite sandwich structures: modelling and experiment. Compos Struct 168:322–334CrossRefGoogle Scholar
  35. 35.
    Choi IH (2018) Finite element analysis of low-velocity impact response of convex and concave composite laminated shells. Compos Struct 186:210–220CrossRefGoogle Scholar
  36. 36.
    Reddy JN (1999) On laminated composite plates with integrated sensors and actuators. Eng Struct 21(7):568–593CrossRefGoogle Scholar
  37. 37.
    Gong SW, Toh SL, Shim VPW (1994) The elastic response of orthotropic laminated cylindrical shells to low-velocity impact. Compos Eng 4(2):247–266CrossRefGoogle Scholar
  38. 38.
    Christoforou AP, Swanson SR (1990) Analysis of simply-supported orthotropic cylindrical shells subject to lateral impact loads. J Appl Mech 57(2):376–382CrossRefGoogle Scholar
  39. 39.
    Li FM, Kishimoto K, Huang W-H (2009) The calculations of natural frequencies and forced vibration responses of conical shell using the Rayleigh-Ritz method. Mech Res Commun 36(5):595–602CrossRefGoogle Scholar
  40. 40.
    Christoforou AP, Swanson SR (1991) Analysis of impact response in composite plates. Int J Solids Struct 27(2):161–170CrossRefGoogle Scholar
  41. 41.
    Carvalho A, Soares CG (1996) Dynamic response of rectangular plates of composite materials subjected to impact loads. Compos Struct 34(1):55–63CrossRefGoogle Scholar

Copyright information

© The Brazilian Society of Mechanical Sciences and Engineering 2019

Authors and Affiliations

  1. 1.School of Civil Engineering and Architecture, Institute of Geotechnical EngineeringEast China Jiaotong UniversityNanchangPeople’s Republic of China

Personalised recommendations