A simple optimization method for the design of a lightweight, explosion-proof housing for a coal mine rescue robot
- 112 Downloads
Weight has a significant effect on the mobile performance of a robot. A coal mine rescue robot (CMRR) is a special type of mobile robot and is relatively heavy because it is explosion proof. In this study, a simple optimization method is proposed for the design of a lightweight, explosion-proof housing of a CMRR. A stress analysis of the individual panels is performed first and ANSYS software is used to perform a stress analysis of multiple stiffened panels. A simple stress equation is developed based on the results and represents the basis of the optimization method. Subsequently, the optimization equations of the explosion-proof housing are developed and the explosion-proof housing of the CUMT-IV robot is designed. Explosion tests were conducted using a physical prototype to verify the strength of the explosion-proof housing. Further, two simple guidelines are developed based on the optimized results to reduce the design difficulty for engineering applications. The simple optimization method proved suitable for designing the explosion-proof housing.
KeywordsCoal mine Rescue robot Structural optimization Lightweight design Explosion proof Stress analysis
The project is supported by the National High Technology Research and Development Program of China (863 Program) (Grant No. 2012AA041504) and the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD), China.
- 7.Ma X, Zhu H (2016) Gas concentration prediction based on the measured data of a coal mine rescue robot. J Robot 3:1–10Google Scholar
- 8.Li YW, Ge SR, Zhu H (2009) Design and manufacture of flameproof enclosure of coal mine rescue robot. Coal Mine Mach 30(2):104–106Google Scholar
- 9.Zhou D, Zhang J, Song Z (2009) Modeling and finite element analysis of flameproof enclosure of coal mine mobile robot. Coal Mine Mach 33(6):84–86Google Scholar
- 11.Sun Y, Liu L (2015) Optimization design of complex flameproof enclosure based on finite element analysis. Ind Mine Autom 41(4):52–54Google Scholar
- 12.Zhao JC, Hou YL, Liu JJ, Gao P (2015) Flame-proof enclosure hydraulic pressure test analysis of underground electrical equipment. Coal Mine Mach 36(4):102–104Google Scholar
- 16.GB 3836.2-2010 (2011) Explosive atmospheres—part 2: equipment protection by flameproof enclosures “d”. China Standard Press, BeijingGoogle Scholar
- 19.An Y, Wang C, Cui H (2016) Design of thinner and lighter explosion proof housing for coal mine flameproof electrical equipment. Colliery Mech Electr Technol 1:38–40Google Scholar