Simulation of engine powered, coupled drive systems
- 18 Downloads
By their nature, combustion engines deliver power in short pulses which create torsional vibrations and noise emissions both within the engine and the driven equipment. Centa Antriebe has addressed their attenuation with the innovative use of simulation software. This article is based on a paper presented at the recent Torsional Vibration Symposium.
Driveline noise and vibration
Rotating equipment is the main source of noise and vibration in a driveline. A flexible coupling is used between the engine and the driven side in order to attenuate critical vibrations and to compensate misalignment under operating conditions. Hence, it is necessary to simulate the driveline in order to identify the critical speeds, loads and the magnitude of the vibratory torque when the shaft system experiences torsional oscillation.
During the combustion of a single cylinder in a multi-cylinder diesel engine, the crankshaft receives a torque pulse which can be modelled as an energy function containing the...
KeywordsTorque Diesel Engine Torsional Vibration Elastic Coupling Acoustic Behaviour
The authors wish to thank Dipl.-Ing. Norbert Jung, Sales Director Marine at Centa Antriebe for his constant support of the project described.
- Gawande S. H.; Navale L. G.; Nandgaonkar M. R.; Butala D.; and Kunamalla, S.: Cylinder imbalance detection of six cylinder diesel engine using pressure variation, International Journal of Engineering Science and Technology, Vol. 2, No. 4, pp. 433–441, 2010Google Scholar
- Gawande S. H.; Navale L. G.; Nandgaonkar M. R.; Butala D.: Torsional frequency analysis of multi-cylinder inline diesel engine generator system, in Proceedings of the International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 10), pp. 519–524, ASME, January 2010CrossRefGoogle Scholar
- Williams J.: Misfiring cylinder diagnosis through Crankshaft, P.hD Thesis, University of Cincinnati, Mechanical Engineering, 1997Google Scholar
- Lim B.; Lim I.; Park. J.; Son. Y.; Kim. E.: Estimation of cylinder pressure in a SI engine using the variation of crankshaft speed, Electronic engine controls, SAE paper No. 940144, in SAE SP 1029, 1994Google Scholar
- östman F., Cylinder balancing of medium-speed of internal combustion engines P.hD Thesis, Turku/Abo (2009)Google Scholar
- Williams, J.: An overview of misfiring cylinder engine diagnostic techniques based on crankshaft angular velocity measurements. SAE technical paper 960039, 1996Google Scholar
- Straky, H.: Fault Detection and Fault Correction for Cylinder Balancing in a Common-rail Diesel Engine. Master Thesis, University of Karlsruhe 1997Google Scholar