Advertisement

Linear Matrix Inequalities for Digital Redesign Under Delay Suitable for PI Controllers with Application to PMSMs

  • Thieli S. Gabbi
  • Gustavo G. KochEmail author
  • Rodrigo P. Vieira
  • Vinícius F. Montagner
  • Eduardo S. Tognetti
  • Renato A. Borges
  • Luiz A. MaccariJr.
  • Ricardo C. L. F. Oliveira
Article
  • 56 Downloads

Abstract

This paper investigates the digital redesign of proportional integral (PI) controllers implemented under a delay of one sampling period. The usual digital redesign based on state matching cannot be directly applied here. The digital control gains are obtained by means of linear matrix inequalities that minimize the \({\mathcal {H}}_{\infty }\) norm associated with an error signal defined as the difference between the closed-loop system with continuous-time controller and the closed-loop system with the discrete-time controller implemented under the delay. Three synthesis conditions are given, exploring extra matrix variables and suitable matrix structures to provide more efficient redesigns that can deal even with large control delays in the implementation of the redesigned controller. As a contribution, the proposed conditions provide a theoretical guarantee that digital PIs, operating under delay, will perform very close to originally designed continuous-time PIs. A numerical example illustrates the efficiency of the proposed conditions, and a practical application for permanent magnet synchronous motor speed regulation shows good experimental results, illustrating the viability of the proposal.

Keywords

Digital redesign Linear matrix inequalities Permanent magnet synchronous motor 

Notes

Acknowledgements

This study was financed in part by the Coordenação de Aperfeiçoamento de Pessoal de Ní vel Superior—Brasil (CAPES/PROEX)—Finance Code 001. The authors would also like to thank the INCT-GD and the finance agencies (CNPq 465640/2014-1, CAPES 23038.000776/2017-54 e FAPERGS 17/2551-0000517-1).

Funding

Funding was provided by Fundação de Apoio à Pesquisa do Distrito Federal and Conselho Nacional de Desenvolvimento Científico e Tecnológico (BR) (Grant Nos. 477487/2013-0, 480415/2013-7, 306197/2015-4).

References

  1. Agulhari, C. M., Oliveira, R. C. L. F., & Peres, P. L. D. (2010). Robust \({\cal{H}}_{\infty }\) static output-feedback design for time-invariant discrete-time polytopic systems from parameter-dependent state-feedback gains. In Proceedings of the 2010 american control conference, Baltimore, MD, USA (pp. 4677–4682).Google Scholar
  2. Åström, K. J., & Hägglund, T. (1995). PID controllers: Theory, design, and tuning. Research Triangle Park, NC: Instrument Society of America.Google Scholar
  3. Aström, K., & Wittenmark, B. (1997). Computer-controlled systems: Theory and design. Upper Saddle River: Prentice Hall.Google Scholar
  4. Boyd, S., El Ghaoui, L., Feron, E., & Balakrishnan, V. (1994). Linear matrix inequalities in system and control theory. Philadelphia, PA: SIAM Studies in Applied Mathematics.CrossRefzbMATHGoogle Scholar
  5. Buso, S., & Mattavelli, P. (2006). Digital control in power electronics. San Rafael: Morgan & Claypool Publishers.CrossRefGoogle Scholar
  6. Chang, W., Park, J. B., & Joo, Y. H. (2003). GA-based intelligent digital redesign of fuzzy-model-based controllers. IEEE Transactions on Fuzzy Systems, 11(1), 35–44.CrossRefGoogle Scholar
  7. Chang, W., Park, J. B., Lee, H. J., & Joo, Y. H. (2002). LMI approach to digital redesign of linear time-invariant systems. IEE Proceedings—Control Theory and Applications, 149(4), 297–302.CrossRefGoogle Scholar
  8. Chen, C. T. (1999). Linear system theory and design (3rd ed.). New York: Oxford University Press.Google Scholar
  9. Chen, T., & Francis, B. (1995). Optimal sampled-data control systems. Communications and control engineering series. Berlin: Springer.Google Scholar
  10. de Oliveira, M. C., Geromel, J. C., & Bernussou, J. (2002). Extended \({{\cal{H}}}_{2}\) and \({{\cal{H}}}_{\infty }\) characterization and controller parametrizations for discrete-time systems. International Journal of Control, 75(9), 666–679.MathSciNetCrossRefzbMATHGoogle Scholar
  11. Dorf, R. C., & Bishop, R. H. (2008). Modern control systems (11th ed.). Upper Saddle River: Prentice Hall.zbMATHGoogle Scholar
  12. Dugard, L., & Verriest, E. I. (1997). Stability and control of time-delay systems. Berlin: Springer.zbMATHGoogle Scholar
  13. Gahinet, P., & Apkarian, P. (1994). A linear matrix inequality approach to \({{\cal{H}}}_{\infty }\) control. International Journal of Robust and Nonlinear Control, 4(4), 412–448.MathSciNetCrossRefzbMATHGoogle Scholar
  14. Holmes, D. G., & Lipo, T. A. (2003). Pulse width modulation for power converters: Principles and practice. Piscataway, NJ: Wiley-IEEE Press.CrossRefGoogle Scholar
  15. Kim, D. W., Park, J. B., & Joo, Y. H. (2009). Robust stabilisation of sampled-data control systems with non-linear perturbations via digital redesign. IET—Control Theory Applications, 3(8), 1070–1080.MathSciNetCrossRefGoogle Scholar
  16. Kim, H. S., Park, J. B., & Joo, Y. H. (2018). Sampled-data control of fuzzy systems based on the intelligent digital redesign method via an improved fuzzy Lyapunov functional approach. IET Control Theory Applications, 12(1), 163–173.MathSciNetCrossRefGoogle Scholar
  17. Koo, G. B., Park, J. B., & Joo, Y. H. (2016). Intelligent digital redesign for non-linear systems: Observer-based sampled-data fuzzy control approach. IET Control Theory Applications, 10(1), 1–9.MathSciNetCrossRefGoogle Scholar
  18. Krishnan, R. (2001). Electric motor drives: Modeling, analysis, and control. Upper Saddle River: Prentice Hall.Google Scholar
  19. Krishnan, R. (2009). Permanent magnet synchronous and brushless DC motor drives (1st ed.). Boca Raton: Mechanical Engineering (Marcel Dekker), CRC Press.CrossRefGoogle Scholar
  20. Lee, H. J., Kim, H., Joo, Y. H., Chang, W., & Park, J. B. (2004). A new intelligent digital redesign for T-S fuzzy systems: Global approach. IEEE Transactions on Fuzzy Systems, 12(2), 274–284.CrossRefGoogle Scholar
  21. Lee, H. J., Park, J. B., & Joo, Y. H. (2005). Digitalizing a fuzzy observer-based output-feedback control: Intelligent digital redesign approach. IEEE Transactions on Fuzzy Systems, 13(5), 701–716.CrossRefGoogle Scholar
  22. Lee, H. J., Park, J. B., & Joo, Y. H. (2006). Further refinement on LMI-based digital redesign: Delta-operator approach. IEEE Transactions on Circuits and Systems II: Express Briefs, 53(6), 473–477.CrossRefGoogle Scholar
  23. Lee, H. J., Shieh, L. S., & Kim, D. W. (2008). Digital control of nonlinear systems: Optimal linearisation-based digital redesign approach. IET Control Theory Applications, 2(4), 337–351.MathSciNetCrossRefGoogle Scholar
  24. Liu, X., Zhang, G., Mei, L., & Wang, (2016). Speed estimation with parameters identification of PMSM based on MRAS. Journal of Control, Automation and Electrical Systems, 27(5), 527–534.CrossRefGoogle Scholar
  25. Maccari, L. A, Jr., Massing, J. R., Schuch, L., Rech, C., Pinheiro, H., Oliveira, R. C. L. F., et al. (2014). LMI-based control for grid-connected converters with LCL filters under uncertain parameters. IEEE Transactions on Power Electronics, 29(7), 3776–3785.CrossRefGoogle Scholar
  26. Maccari, L. A, Jr., Montagner, V. F., & Oliveira, R. C. L. F. (2013). Digital redesign LMI conditions for state feedback controllers with an application for power electronics. In 2013 Brazilian proceedings of the power electronics conference (COBEP) (pp. 350–355).Google Scholar
  27. Palhares, R. M., Takahashi, R. H. C., & Peres, P. L. D. (1997). \({{\cal{H}}}_{\infty }\) and \({{\cal{H}}}_{2}\) guaranteed costs computation for uncertain linear systems. International Journal of Systems Science, 28(2), 183–188.CrossRefGoogle Scholar
  28. Rabbath, C. A., Hori, N., & Lechevin, N. (2004). Convergence of sampled-data models in digital redesign. IEEE Transactions on Automatic Control, 49(5), 850–855.MathSciNetCrossRefzbMATHGoogle Scholar
  29. Rosenvasser, Y. N., Polyakov, E. Y., & Lampe, B. P. (1999). Application of Laplace transformation for digital redesign of continuous control systems. IEEE Transactions on Automatic Control, 44(4), 883–886.MathSciNetCrossRefzbMATHGoogle Scholar
  30. Shieh, L. S., Zhao, X. M., & Zhang, J. L. (1989). Locally optimal-digital redesign of continuous-time systems. IEEE Transactions on Industrial Electronics, 36(4), 511–515.CrossRefGoogle Scholar
  31. Sung, H. C., Park, J. B., & Joo, Y. H. (2012). Robust control of observer-based sampled-data systems: Digital redesign approach. IET Control Theory Applications, 6(12), 1842–1850.MathSciNetCrossRefGoogle Scholar
  32. Tsai, J. S. H., Shieh, L. S., & Zhang, J. L. (1993). An improvement on the digital redesign method based on the block-pulse function approximation. Circuits, Systems and Signal Processing, 12(1), 37–49.CrossRefzbMATHGoogle Scholar
  33. Zhou, K., Doyle, J. C., & Glover, K. (1996). Robust and optimal control. Upper Saddle River, NJ: Prentice Hall.zbMATHGoogle Scholar

Copyright information

© Brazilian Society for Automatics--SBA 2019

Authors and Affiliations

  • Thieli S. Gabbi
    • 1
  • Gustavo G. Koch
    • 1
    Email author
  • Rodrigo P. Vieira
    • 1
  • Vinícius F. Montagner
    • 1
  • Eduardo S. Tognetti
    • 2
  • Renato A. Borges
    • 2
  • Luiz A. MaccariJr.
    • 3
  • Ricardo C. L. F. Oliveira
    • 4
  1. 1.Federal University of Santa Maria – UFSMSanta MariaBrazil
  2. 2.University of Brasilia – UnBBrasíliaBrazil
  3. 3.Federal University of Santa Catarina – UFSCBlumenauBrazil
  4. 4.University of Campinas – UNICAMPCampinasBrazil

Personalised recommendations