Advertisement

Acta Metallurgica Sinica (English Letters)

, Volume 32, Issue 12, pp 1490–1500 | Cite as

Oxidation Performance and Interdiffusion Behavior of a Pt-Modified Aluminide Coating with Pre-deposition of Ni

  • He Liu
  • Shuai Li
  • Cheng-Yang Jiang
  • Chun-Tang Yu
  • Ze-Bin BaoEmail author
  • Sheng-Long Zhu
  • Fu-Hui Wang
Article
  • 56 Downloads

Abstract

To refrain the interdiffusion of elements while holding good oxidation resistance, a (Ni,Pt)Al/Ni composite coating was prepared by sequential treatments of electroplating Ni and Pt and successive gaseous aluminization. In comparison with normal (Ni,Pt)Al coating, high-temperature performance of the composite coating was evaluated in isothermal oxidation test at 1100 °C. Both the two coatings exhibited good resistance against high-temperature oxidation, but the interdiffusion of elements between composite coating and single-crystal (SC) superalloy substrate was greatly relieved, in which the thickness of secondary reaction zone (SRZ) and the amount of precipitated topologically close-packed phase in the SC alloy matrix were significantly decreased. Mechanisms responsible for delaying rate of coating degradation and SRZ growth/propagation are discussed.

Keywords

Aluminide coating Oxidation Interdiffusion Microstructure 

Notes

Acknowledgements

This work was financially supported by the National Natural Science Foundation of China (Nos. 51671202 and 51301184) and the “Liaoning BaiQianWan Talents” Program.

References

  1. [1]
    M.J. Pomeroy, Mater. Des. 26, 223 (2005)Google Scholar
  2. [2]
    J.H. Sun, H.C. Jang, E. Chang, Surf. Coat. Technol. 64, 195 (1994)Google Scholar
  3. [3]
    R.G. Wing, I.R. Mcgill, Plat. Eng. 53, 15 (1981)Google Scholar
  4. [4]
    S. Darzens, D.R. Mumm, D.R. Clarke, A.G. Evans, Metall. Mater. Trans. A 34, 511 (2003)Google Scholar
  5. [5]
    S.K. Gong, L. Deng, F.S. Liu, H.B. Xu, Acta Metall. Sin. (Engl. Lett.) 9, 519 (1996)Google Scholar
  6. [6]
    E.J. Felten, F.S. Pettit, Oxid. Met. 10, 189 (1976)Google Scholar
  7. [7]
    J.G. Fountain, F.A. Golightly, F.H. Stott, G.C. Wood, Oxid. Met. 10, 341 (1976)Google Scholar
  8. [8]
    D.K. Das, V. Singh, S.V. Joshi, Oxid. Met. 57, 245 (2001)Google Scholar
  9. [9]
    G.H. Meier, F.S. Pettit, Surf. Coat. Technol. 39, 1 (1989)Google Scholar
  10. [10]
    H.M. Tawancy, N.M. Abbas, T.N. Rhys-Jones, Surf. Coat. Technol. 49, 1 (1991)Google Scholar
  11. [11]
    H.M. Tawancy, N. Sridhar, B.S. Tawabini, N.M. Abbas, T.N. Rhys-Jones, J. Mater. Sci. 27, 6463 (1992)Google Scholar
  12. [12]
    H.M. Tawancy, N. Sridhar, N.M. Abbas, D. Rickerby, Scr. Metall. Mater. 33, 1431 (1995)Google Scholar
  13. [13]
    J.A. Haynes, B.A. Pint, Y. Zhang, I.G. Wright, Oxid. Met. 58, 513 (2002)Google Scholar
  14. [14]
    Y. Zhang, W.Y. Lee, J.A. Haynes, I.G. Wright, B.A. Pint, K.M. Cooley, P.K. Liaw, Metall. Mater. Trans. A 30, 2679 (1999)Google Scholar
  15. [15]
    C. Leyens, B.A. Pint, I.G. Wright, Surf. Coat. Technol. 133, 15 (2000)Google Scholar
  16. [16]
    V.K. Tolpygo, D.R. Clarke, Scr. Mater. 57, 563 (2007)Google Scholar
  17. [17]
    V.K. Tolpygo, K.S. Murphy, D.R. Clarke, Acta Mater. 56, 489 (2008)Google Scholar
  18. [18]
    M.W. Chen, M.L. Glynn, R.T. Ott, T.C. Hufnagel, K.J. Hemker, Acta Mater. 51, 4279 (2003)Google Scholar
  19. [19]
    J. Angenete, K. Stiller, E. Bakchinova, Surf. Coat. Technol. 176, 272 (2004)Google Scholar
  20. [20]
    D. Wang, H. Peng, S.K. Gong, H.B. Guo, Corros. Sci. 78, 304 (2014)Google Scholar
  21. [21]
    B. Bai, H.B. Guo, H. Peng, L.Q. Peng, S.K. Gong, Corros. Sci. 53, 2721 (2011)Google Scholar
  22. [22]
    D.K. Das, K.S. Murphy, S.W. Ma, T. Pollock, Metall. Mater. Trans. A 39, 1647 (2008)Google Scholar
  23. [23]
    Y. Matsuoka, K. Chikugo, T. Suzuki, Y. Matsunaga, S. Taniguchi, Mater. Sci. Forum 512, 111 (2006)Google Scholar
  24. [24]
    F. Lang, T. Narita, Intermetallics 15, 599 (2007)Google Scholar
  25. [25]
    F. Wu, H. Murakami, A. Suzuki, Surf. Coat. Technol. 168, 62 (2003)Google Scholar
  26. [26]
    Y. Wang, H.B. Guo, H. Peng, L.Q. Peng, S.K. Gong, Intermetallics 19, 191 (2011)Google Scholar
  27. [27]
    Z.M. Bai, D.Q. Li, H. Peng, J. Wang, H.B. Guo, S.K. Gong, Prog. Nat. Sci. Mater. Int. 146, 37 (2012)Google Scholar
  28. [28]
    L.J. Zhu, S.L. Zhu, F.H. Wang, Corros. Sci. 60, 265 (2012)Google Scholar
  29. [29]
    J. Müller, M. Schierling, E. Zimmermann, D. Neuschütz, Surf. Coat. Technol. 120, 16 (1999)Google Scholar
  30. [30]
    T.Q. Liang, H.B. Guo, H. Peng, S.K. Gong, J. Alloys Compd. 509, 8542 (2011)Google Scholar
  31. [31]
    Y.F. Yang, C.Y. Jiang, Z.B. Bao, S.L. Zhu, F.H. Wang, Corros. Sci. 106, 43 (2016)Google Scholar
  32. [32]
    Y. Matsuoka, Y. Aoki, K. Matsumoto, A. Satou, T. Suzuki, K. Chikugo, K. Murakami, Superalloys 12(637), 637–642 (2004)Google Scholar
  33. [33]
    J.D. Nystrom, T.M. Pollock, W.H. Murphy, A. Garg, Metall. Mater. Trans. A 28, 2443 (1997)Google Scholar
  34. [34]
    Q.Y. Shi, X.F. Ding, M.L. Wang, Y.R. Zheng, J.P. He, S. Tin, Q. Feng, Metall. Mater. Trans. A 45, 1833 (2013)Google Scholar
  35. [35]
    V.A. Esin, V. Maurel, P. Breton, A. Köster, S. Selezneff, Acta Mater. 105, 505 (2016)Google Scholar
  36. [36]
    F. Pedraza, A.D. Kennedy, J. Kopecek, P. Moretto, Surf. Coat. Technol. 200, 4032 (2006)Google Scholar
  37. [37]
    T.Q. Liang, H.B. Guo, H. Peng, S.K. Gong, Surf. Coat. Technol. 205, 4374 (2011)Google Scholar
  38. [38]
    W. Huang, Y.A. Chang, Mater. Sci. Eng. A 259, 110 (1999)Google Scholar
  39. [39]
    M. Reid, M.J. Pomeroy, J.S. Robinson, J. Mater. Process. Technol. 153, 660 (2004)Google Scholar
  40. [40]
    D.B. Zhang, S.K. Gong, H.B. Xu, Y.F. Han, Acta Metall. Sin. (Engl. Lett.) 15, 45 (2002)Google Scholar
  41. [41]
    C.M.F. Rae, R.C. Reed, Acta Mater. 49, 4113 (2001)Google Scholar
  42. [42]
    J.X. Yang, Q. Zheng, X.F. Sun, H.R. Guan, Z.Q. Hu, Mater. Sci. Eng. A 465, 100 (2007)Google Scholar

Copyright information

© The Chinese Society for Metals (CSM) and Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  • He Liu
    • 1
    • 2
  • Shuai Li
    • 1
    • 2
  • Cheng-Yang Jiang
    • 3
  • Chun-Tang Yu
    • 1
    • 2
  • Ze-Bin Bao
    • 1
    Email author
  • Sheng-Long Zhu
    • 1
  • Fu-Hui Wang
    • 3
  1. 1.Institute of Metal ResearchChinese Academy of SciencesShenyangChina
  2. 2.School of Materials Science and EngineeringUniversity of Science and Technology of ChinaShenyangChina
  3. 3.Shenyang National Laboratory for Materials ScienceNortheastern UniversityShenyangChina

Personalised recommendations