Welding in the World

, Volume 62, Issue 3, pp 581–599 | Cite as

The effect of postweld heat treatment on hydrogen-assisted cracking of 8630/Alloy 625 overlay

Research Paper
  • 34 Downloads

Abstract

The weld interface of Alloy 625 clad onto AISI 8630 steel requires postweld heat treatment (PWHT) to reduce the heat-affected zone (HAZ) hardness of the steel to meet industry standards. This PWHT results in carbon diffusion and pile up in the transition zone at the fusion boundary which potentially embrittles the 8630/625 interface. For the 8630/625 overlay, the PWHT needs to be carefully selected to reduce the potential for hydrogen-assisted cracking (HAC) and/or sulfide stress cracking (SSC). In this work, a wide range of PWHT conditions defined by the Hollomon-Jaffe parameter (HJP) was studied using the delayed hydrogen cracking test (DHCT). The effect of PWHT on HAC behavior was quantified using this test and the optimal HJP range for resistance to HAC was determined to be in the range from 18,500 to 19,500. Fracture surface analysis was conducted on failed samples to further evaluate the effect of PWHT and confirm the optimal HJP range. The HAC behavior of the 8630/625 overlay was compared with that of the F22/625 overlay reported previously.

Keywords

Postweld heat treatment Low-alloy steels Nickel alloys Hydrogen embrittlement Fracture tests Fractography 

Notes

Acknowledgements

The base metal and filler metal were provided by Cameron and ATS, respectively, and ATS conducted the cladding of Alloy 625 on AISI 8630 steel. Our thanks to Mr. Dean Hannam and Mr. Nash Ubale from Schlumberger (formerly Cameron International) who gave advice and guidance throughout the project, and to Mr. Tim Thompson from ATS who coordinated the production of weld overlays.

References

  1. 1.
    Dai T, Lippold JC (2018) The effect of postweld heat treatment on hydrogen-assisted cracking of F22/alloy 625 overlays. Weld J 97:75s–90sGoogle Scholar
  2. 2.
    Dai T, and Lippold JC (2018) Tempering behavior of the fusion boundary region of alloy 625 weld overlay on 8630 steel—accepted. Welding in the WorldGoogle Scholar
  3. 3.
    ISO, 15156-2 (2009) Petroleum and natural gas industries—materials for use in H2S-containing environments in oil and gas production—part 2: cracking-resistant carbon and low alloy steels and the use of cast ironsGoogle Scholar
  4. 4.
    Alexandrov BT, Lippold JC, Sowards JW, Hope AT, Saltzmann DR (2013) Fusion boundary microstructure evolution associated with embrittlement of Ni–base alloy overlays applied to carbon steel. Welding World 57:39–53CrossRefGoogle Scholar
  5. 5.
    Alexandrov B, Shi S, Rodelas JM, Lippold JC (2012) A new test for evaluation of susceptibility to hydrogen assisted cracking in dissimilar metal welds. NACE corrosion conference & expo, HoustonGoogle Scholar
  6. 6.
    Bourgeois D (2015) Hydrogen assisted crack in dissimilar metal welds for subsea service under cathodic protection: dissertation. The Ohio State University, ColumbusGoogle Scholar
  7. 7.
    Wang M, Akiyama E, Tsuzaki K (2007) Effect of hydrogen on the fracture behavior of high strength steel during slow strain rate test. Corros Sci 49:4081–4097CrossRefGoogle Scholar
  8. 8.
    Symons DM (1997) Hydrogen embrittlement of Ni-Cr-Fe alloys. Metall Mater Trans A 28A:655–663CrossRefGoogle Scholar
  9. 9.
    Symons DM (1998) The effect of carbide precipitation on the hydrogen-enhanced fracture behavior of alloy 690. Metall Mater Trans A 29A:1265–1277CrossRefGoogle Scholar
  10. 10.
    Fenske JA (2010) Microstructure and hydrogen induced failure mechanisms in iron-nickel weldments. University of Illinois at Urbana-Champaign, UrbanaGoogle Scholar
  11. 11.
    Dodge MF (2014) The effect of heat treatment on the embrittlement of dissimilar welded joints. Univeristy of Leicester, LeicesterGoogle Scholar
  12. 12.
    Luppo MI, Ovejero-Garcia J (1991) The influence of microstructure on the trapping and diffusion of hydrogen in a low carbon steel. Corros Sci 32(10):1125–1136CrossRefGoogle Scholar
  13. 13.
    Nagao A, Smith CD, Dadfarnia M, Sofronis P, Robertson IM (2012) The role of hydrogen in hydrogen embrittlement fracture of lath martensitic steel. Acta Mater 60:5182–5189CrossRefGoogle Scholar
  14. 14.
    Lippold JC (2014) Welding metallurgy and weldability. John Wiley & Sons, Inc, Hoboken p. 215Google Scholar
  15. 15.
    Gangloff RP, Somerday BP (2012) Gaseous hydrogen embrittlement of materials in energy technologies: volume 1. Woodhead Publishing, CambridgeCrossRefGoogle Scholar
  16. 16.
    Lynch SP (1988) Environmentally assisted cracking: overview of evidence for an adsorption-induced localised-slip process. Acta Metallugica 36(10):2639–2661CrossRefGoogle Scholar
  17. 17.
    Lynch SP (1989) Metallographic contributions to understanding mechanisms of environmentally assisted cracking. Metallography 23(2):147–171CrossRefGoogle Scholar
  18. 18.
    Morlet J, Johnson H, Troiano A (1958) A new concept of hydrogen embrittlement in steel. J Iron Steel Inst 189:37–44Google Scholar
  19. 19.
    Troiano A (1960) The role of hydrogen and other interstitials in the mechanical behaviour of metals. Trans ASM 52:54–80Google Scholar
  20. 20.
    Whiteman M, Troiano A (1965) Hydrogen embrittlement of austenitic stainless steel. Corrosion 21(2):53–56CrossRefGoogle Scholar
  21. 21.
    Oriani RA, Josephic PH (1979) Hydrogen-enhanced load relaxation in a deformed medium-carbon steel. Acta Metall 27(6):997–1005CrossRefGoogle Scholar
  22. 22.
    Oriani R (1970) The diffusion and trapping of hydrogen in steel. Acta Metall 18:147–157CrossRefGoogle Scholar
  23. 23.
    Wriedt HA, Oriani RA (1970) Effect of tensile and compressive elastic stress on equilibrium hydrogen solubility in a solid. Acta Metall 18:753–760CrossRefGoogle Scholar
  24. 24.
    Oriani R (1972) A mechanistic theory of hydrogen embrittlement of steels. Berichte der Bunsengesellschaft für Phys Chemie 76:848–857Google Scholar
  25. 25.
    Oriani R, Josephic P (1974) Equilibrium aspects of hydrogen-induced cracking of steels. Acta Metall 22:1065–1074CrossRefGoogle Scholar
  26. 26.
    Beachem C (1972) A new model for hydrogen-assisted cracking (hydrogen “embrittlement”). Metall Mater Trans B 3:441–455CrossRefGoogle Scholar
  27. 27.
    Yue X (2013) Evaluation of heat-affected zone hydrogen-induced cracking in high-strength steels—dissertation. The Ohio State University, ColumbusGoogle Scholar
  28. 28.
    Hollomon J, Jaffe L (1945) Time-temperature relations in tempering steel. Metal Technol 12:223–249Google Scholar
  29. 29.
    Martin ML, Fenske JA, Liu GS, Sofronis P, Robertson IM (2011) On the formation and nature of quasi-cleavage fracture surfaces in hydrogen embrittled steels. Acta Mater 59:1601–1606CrossRefGoogle Scholar

Copyright information

© International Institute of Welding 2018

Authors and Affiliations

  1. 1.Welding Engineering Laboratory, Department of Materials Science and EngineeringThe Ohio State UniversityColumbusUSA

Personalised recommendations