Advertisement

Solvothermal Synthesis and Characterization of Magnetic Bamboo Charcoal (BC) Nanocomposites

  • Hiroshi Nishioka
  • Tushar Kanti SenEmail author
Original Contribution

Abstract

In this paper the synthesis of magnetic bamboo charcoal–iron oxide (BC/Fe) nanocomposites from raw bamboo (Phyllostachys pubescens) by the solvothermal process is presented. In the first step, bamboo charcoal was prepared from raw bamboo in an oven at a temperature of 800 °C. In the second step, a carbon matrix of iron oxide magnetic nanoparticles was prepared by the solvothermal process. Ferric nitrate was the iron precursor, and ethylene glycol and other solvents were the reducing agents. The effect of various process parameters such as molar ratio of BC to Fe, reduction temperature, solvents and duration of reaction on the size, shape and amount of produced magnetic iron oxide particles were reported. The reduction temperature, time and selection of solvent were the most critical parameters. XRD analysis showed the presence of magnetite, along with humboldtine particles, on the bamboo charcoal (BC) with an average size range of 12.7 nm to 29.3 nm.

Keywords

Magnetic materials Nanocomposites Solvothermal X-ray diffraction 

Notes

References

  1. 1.
    I. Safarik, K. Horska, K. Pospiskova, M. Safarikova, Magnetically responsive activated carbons for bio- and environmental application. Int. Rev. Chem. Eng. 4(3), 346–352 (2012)Google Scholar
  2. 2.
    T. Chiang, H.H.C. Yeh, Synthesis of silver particle onto bamboo charcoal by tripropylene glycol and the composites characterization. Materials 7, 42–750 (2014)CrossRefGoogle Scholar
  3. 3.
    J. Zhu, S. Wei, M. Chen, H. Gu, S.B. Rapole, S. Pallavkar, T.C. Ho, J. Hopper, Z. Guo, Magnetic nanocomposites for environmental remediation. Adv. Powder Technol. 24, 459–467 (2013)CrossRefGoogle Scholar
  4. 4.
    M. Guan, Manual for Bamboo Charcoal Production and Utilization (2004). http://bambubrasileiro.com/arquivos/Bamboo%20Charcoal%20Production%20Manual%20-%20Nanjing%20University.pdf
  5. 5.
    R.L. Tseng, F.C. Wu, R.S. Juang, Liquid-phase adsorption of dyes and phenols using pinewood-based activated carbons. Carbon 41, 487–495 (2003)CrossRefGoogle Scholar
  6. 6.
    Y. Guo, S. Yang, W. Fu, J. Qi, R. Li, Z. Wang, H. Xu, Adsorption of malachite green on micro and mesoporous rice husk-based active carbon. Dyes Pigments. 56, 219–229 (2003)CrossRefGoogle Scholar
  7. 7.
    M. Yaqub, T.K. Sen, S. Afroze, H.M. Ang, Removal of dyes from its aqueous solution by adsorption: a review. Adv. Colloid Interface Sci. 209, 172–184 (2014)CrossRefGoogle Scholar
  8. 8.
    S.K. Bardhan, B.F. Sogra, B. Mohan Raj, P.K.K. Pant, Synthesis and characterization of bamboo charcoal–silver composites with high antibacterial efficiency. Procedia Mater. Sci. 5, 558–566 (2014)CrossRefGoogle Scholar
  9. 9.
    H.C.U. Schwartzman, R.M. Cornell, Iron Oxide in the Laboratory: Preparation and Characterization (Wiley-VCH Verlag GmbH, Weinheim, 2007).  https://doi.org/10.1002/9783527613229 Google Scholar
  10. 10.
    M. Mohapatra, S. Anand, Synthesis and applications of nano-structured iron oxides/hydroxides—a review. Int. J. Eng. Sci. Technol. 2(8), 127–146 (2010)Google Scholar
  11. 11.
    L.Th.M. Hoa, T.Th. Dung, T.Ma. Danh, H.D. Nguyen, D.M. Chien, Preparation and characterization of magnetic nanoparticles coated with polyethylene glycol. J. Phys: Conf. Ser. 187, 1–5 (2009).  https://doi.org/10.1088/1742-6596/187/1/012048 Google Scholar
  12. 12.
    M.Z. Krolow, C.A. Hartwig, G.C. Link, C.W. Raubach et al., Synthesis and characterization of carbon nanocomposites. Carbon Nanostruct. (2011).  https://doi.org/10.1007/978-3-642-31960-0_2 Google Scholar
  13. 13.
    P. Kim, N.M. Doss, J.P. Tillotson, P.J. Hotchkiss, M.-J. Pan, S.R. Marder, J. Li, J.P. Calame, J.W. Perry, High energy density nanocomposites based on surface-modified BaTiO3. ACS Nano 3, 2581–2592 (2009)CrossRefGoogle Scholar
  14. 14.
    H. Zhou, Z. Jiang, S. Wei, A novel adsorbent of nano-Fe loaded biomass char and its enhanced adsorption capacity for phosphate in water. J. Chem. 2011, 1–9 (2013).  https://doi.org/10.1155/2013/649868 Google Scholar
  15. 15.
    M. Shen, Y. Yu, G. Fan, G. Chen et al., The synthesis and characterization of monodispersed chitosan-coated Fe3O4 nanoparticles via a facile one-step solvothermal process for adsorption of bovine serum albumin. Nanoscale Res. Lett. 9, 296 (2014)CrossRefGoogle Scholar
  16. 16.
    B. Kakavandi, A. Jonidi, R. Rezael, S. Nasseri, A. Ameri, A. Esrafily, Synthesis and properties of Fe3O4-activated carbon magnetic nanoparticles for removal of aniline from aqueous solution: equilibrium, kinetic and thermodynamic studies. Iran. J. Environ. Health Sci. Eng. 10, 10–19 (2013)CrossRefGoogle Scholar
  17. 17.
    T. Pellegrino, L. Manna, S. Kudora et al., Hydrophobic nanocrystals coat with an amphiphilic polymers shell: a general route to water soluble nanocrystals. Nano Lett. 4, 703–707 (2004)CrossRefGoogle Scholar
  18. 18.
    E.-A.J. Lin, R.A. Sperling et al., Design of an amphiphilic polymer for nano particles coating and functionization. Small 4, 334–341 (2008)CrossRefGoogle Scholar
  19. 19.
    W. Wu, Z. Wu et al., Recent progress on magnetic iron-oxide nanoparticles: synthesis, surface functional strategies and biomedical applications. Sci. Technol. Adv. Mater. 16, 1–43 (2015)CrossRefGoogle Scholar
  20. 20.
    H. Wang, B. Hsieh et al., Solvent effects on polymer sorting of carbon nanotubes with applications in printed electronics. Small 11(1), 126–133 (2015)CrossRefGoogle Scholar

Copyright information

© The Institution of Engineers (India) 2019

Authors and Affiliations

  1. 1.Department of Applied Chemistry, Graduate School of EngineeringUniversity of HyogoHimejiJapan
  2. 2.Department of Chemical EngineeringCurtin University, PerthPerthAustralia

Personalised recommendations