Advertisement

Detection and Quantification of Crack in Composite Mono Leaf Spring by Vibration Parameters

  • Nagendra Iranna Jamadar
  • Sangshetty Bheemanna Kivade
  • Sudhakara Rao Pedada
Case Study
  • 104 Downloads

Abstract

Automobile industries focus for the components alternative to conventional materials with composites. There is high demand for enhanced performance and light weight. The emphasis is given for composite mono leaf spring as potential item as it is made up of glass fibre reinforced plastics despite they are sensitive to damages such as crack, delamination, de-bonding etc., occurred during either manufacturing or in service condition. These damages grow in progression and results in catastrophic failure. This work aims to deal with structural health monitoring to study and analyse the damage levels in composite mono leaf spring such as detection, location and quantification of damage. An experimental investigation has been carried out to evaluate presence and severity of damage by vibration parameters and validated with simulation.

Keywords

Composite mono leaf spring Glass fibre reinforced plastic Structural health monitoring Vibration parameters 

Notes

Acknowledgments

The author would like to thank M/s Arc Industries for their valuable support.

References

  1. 1.
    A. Rytter, Vibrational based inspection of civil engineering structures. Doctoral Thesis, Aalborg University-Denmark (1993)Google Scholar
  2. 2.
    R.D. Adams, P. Cawley, C.J. Pye, D. Short, Vibration technique for non-destructively assessing the integrity of structures. Mech. Eng. Sci. 20(2), 93–100 (1978)CrossRefGoogle Scholar
  3. 3.
    W.H. Tsai, J.C. Yang, Nondestructive evaluation of composite structures using system identification technique. J. Eng. Mater. Technol. 110(2), 134–139 (1988)CrossRefGoogle Scholar
  4. 4.
    K.H. Barad, S. Sharma, V. Vyas, Crack detection in cantilever beam by frequency based method. J. Proc. Eng. 51, 770–775 (2013)CrossRefGoogle Scholar
  5. 5.
    Z. Yu, F. Chu, Identification of crack in functionally graded material beams using the p-version of finite element method. J. Sound Vib. 325, 69–84 (2009)CrossRefGoogle Scholar
  6. 6.
    J. Thalapil, S.K. Maiti, Detection of longitudinal cracks in long and short beams using changes in natural frequencies. Int. J. Mech. Sci. 83, 38–47 (2014)CrossRefGoogle Scholar
  7. 7.
    J.Y. Lai, K.F. Young, Dynamic of graphite/epoxy composite under delamination fracture and environmental effects. J. Compos. Struct. 30(1), 25–32 (1995)CrossRefGoogle Scholar
  8. 8.
    M.A. Abdo, M. Hori, A numerical study of structural damage detection using changes in the rotation of mode shape. J. Sound Vib. 251(2), 227–239 (2002)CrossRefGoogle Scholar
  9. 9.
    H.P. Zhu, Y.L. Xu, Damage detection of mono-coupled periodic structures based on sensitivity analysis of modal parameters. J. Sound Vib. 285(1–2), 365–390 (2005)CrossRefGoogle Scholar
  10. 10.
    W. Lestari, P. Qiao, Damage detection of fiber-reinforced polymer honey comb sandwich beams. Compos. Struct. 67(3), 365–373 (2005)CrossRefGoogle Scholar
  11. 11.
    A.K. Pandey, M. Biswas, Experimental-verification of flexibility difference method for locating damage in structures. J. Sound Vib. 184(2), 311–328 (1995)CrossRefGoogle Scholar

Copyright information

© The Institution of Engineers (India) 2016

Authors and Affiliations

  • Nagendra Iranna Jamadar
    • 1
  • Sangshetty Bheemanna Kivade
    • 2
  • Sudhakara Rao Pedada
    • 3
  1. 1.Visvesvaraya Technological UniversityKalaburagiIndia
  2. 2.Basavakalyan Engineering CollegeBidarIndia
  3. 3.Tata Technologies LtdPuneIndia

Personalised recommendations