Damage Tolerant Analysis of Cracked Al 2024-T3 Panels repaired with Single Boron/Epoxy Patch

  • Akshay D. Mahajan
  • A. Ramachandra Murthy
  • M. R. Nanda Kumar
  • Smitha Gopinath
Original Contribution
  • 9 Downloads

Abstract

It is known that damage tolerant analysis has two objectives, namely, remaining life prediction and residual strength evaluation. To achieve the these objectives, determination of accurate and reliable fracture parameter is very important. XFEM methodologies for fatigue and fracture analysis of cracked aluminium panels repaired with different patch shapes made of single boron/epoxy have been developed. Heaviside and asymptotic crack tip enrichment functions are employed to model the crack. XFEM formulations such as displacement field formulation and element stiffness matrix formulation are presented. Domain form of interaction integral is employed to determine Stress Intensity Factor of repaired cracked panels. Computed SIFs are incorporated in Paris crack growth model to predict the remaining fatigue life. The residual strength has been computed by using the remaining life approach, which accounts for both crack growth constants and no. of cycles to failure. From the various studies conducted, it is observed that repaired panels have significant effect on reduction of the SIF at the crack tip and hence residual strength as well as remaining life of the patched cracked panels are improved significantly. The predicted remaining life and residual strength will be useful for design of structures/components under fatigue loading.

Keywords

XFEM Stress intensity factor Fatigue ABAQUS Interaction integral Remaining life 

Notes

Acknowledgement

The authors are thankful to the staff of the Computational Structural Mechanics Group (CSMG) of CSIR- Structural Engineering Research Centre, Chennai, India for the co-operation and suggestions provided during the investigations.

References

  1. 1.
    A.C. Okafor, N. Singh, U.E. Enemuoh, S.V. Rao, Design analysis and performance of adhesively bonded composite patch repair of cracked aluminium aircraft panel. Compos. Struct. 71(2), 258–270 (2005)CrossRefGoogle Scholar
  2. 2.
    Y. Murakami, Stress Intensity Factors Handbook (Pergamon Press, Oxford, 1988)Google Scholar
  3. 3.
    T. Belytschko, T. Black, Elastic crack growth in finite elements with minimal remeshing. Int. J. Numer. Methods Eng. 45(5), 601–620 (1999)CrossRefMATHGoogle Scholar
  4. 4.
    N. Moes, J. Dolbow, T. Belytschko, A finite element method for crack growth without remeshing. Int. J. Numer. Methods Eng. 46, 131–150 (1999)CrossRefMATHGoogle Scholar
  5. 5.
    J. Dolbow, N. Moes, T. Belytschko, Discontinuous enrichment in finite elements with a partition of unity method. Finite Elem. Anal. Des. 36, 235–260 (2000)CrossRefMATHGoogle Scholar
  6. 6.
    M.M. Ratwani, Characterization of Fatigue Crack Growth in Bonded Structures, Volume II, Analysis of Cracked Bonded Structure. AFFDL-TR-77-31, Air Force Flight Dynamics Laboratory, Ohio (1977)Google Scholar
  7. 7.
    C.T. Sun, J. Klug, C. Arendt, Analysis of cracked aluminium panels repaired with bonded composite patches. AIAA J. 34(2), 369–374 (1996)CrossRefMATHGoogle Scholar
  8. 8.
    L.R.F. Rose, Crack reinforcement by distributed springs. J. Mech. Phys. Solids 35(3), 83–405 (1987)MathSciNetMATHGoogle Scholar
  9. 9.
    R.J. Callinan, L.R.F. Rose, C.H. Wang, Three dimensional stress analysis of crack patching, in Proceedings of International Conference on Fracture ICF-9, pp. 2151–2158 (1997)Google Scholar
  10. 10.
    B. Bouiadjra, M. Belhouari, B. Serier, Computation of the stress intensity factor for repaired cracks with bonded composite patch in mode I and mixed mode. Compos. Struct. 56(4), 401–406 (2002)CrossRefGoogle Scholar
  11. 11.
    M. Belhouari, B. Bouiadjra, A. Megueni, K. Kaddouri, Comparison of double and single bonded repairs to symmetric composite structures: a numerical analysis. Compos. Struct. 65(1), 47–53 (2004)CrossRefGoogle Scholar
  12. 12.
    K. Madani, S. Touzain, X. Feaugas, M. Benguediab, M. Ratwani, Numerical analysis for the determination of the stress intensity factor and crack opening displacements in panels repaired with the single and double composite patches. Comput. Mater. Sci. 42(3), 385–393 (2008)CrossRefGoogle Scholar
  13. 13.
    K. Kaddouri, D. Ouinas, B.B. Bouiadjra, FE analysis of the behaviour of octagonal bonded composite repair in aircraft structures. Comput. Mater. Sci. 43(4), 1109–1111 (2008)CrossRefGoogle Scholar
  14. 14.
    D. Ouinas, A. Hebbar, B.B. Bouiadjra, M. Belhouari, B. Serier, Numerical analysis of the stress intensity factors for repaired cracks from a notch with the bonded composite semi-circular patch. Compos. Part B Eng. 40(8), 808–810 (2009)CrossRefGoogle Scholar
  15. 15.
    L. Gu, A.R.M. Kasavajhala, S. Zhao, Finite element analysis of cracks in aging aircraft structures with bonded composite patch repairs. Compos. Part B Eng. 42(3), 505–510 (2011)CrossRefGoogle Scholar
  16. 16.
    M.J. Omidi, M. Falah, D. Taherifar, 3-D fracture analysis ofcracked aluminium panels repaired with single and double composite patches using XFEM. Struct. Eng. Mech. 50(4), 525–539 (2014)CrossRefGoogle Scholar
  17. 17.
    J. Shouyan, D. Chengbin, G. Chongshi, An investigation into the effects of voids inclusions and minor cracks on major crack propagation by using XFEM. Struct. Eng. Mech. 49(5), 597–618 (2014)CrossRefGoogle Scholar
  18. 18.
    S. Mohammadi, Extended Finite Element Method for Fracture Analysis of Structures (Blackwell Publishing Limited, Hoboken, 2008)CrossRefMATHGoogle Scholar
  19. 19.
    A.R.C. Murthy, G.S. Palani, N.R. Iyer, Residual strength evaluation of unstiffened and stiffened panels under fatigue loading. SDHM 5(3), 201–226 (2009)Google Scholar
  20. 20.
    Abaqus 6.10, Analysis User’s Manual, Dassaultsimulia, http://www.simulia.com

Copyright information

© The Institution of Engineers (India) 2018

Authors and Affiliations

  • Akshay D. Mahajan
    • 1
  • A. Ramachandra Murthy
    • 2
  • M. R. Nanda Kumar
    • 3
  • Smitha Gopinath
    • 2
  1. 1.Structural Engineering DivisionVIT UniversityVelloreIndia
  2. 2.CSIR-Structural Engineering Research CentreChennaiIndia
  3. 3.Civil Engineering DivisionNuclear Fuel ComplexHyderabadIndia

Personalised recommendations