Advertisement

Journal of Pharmaceutical Investigation

, Volume 49, Issue 1, pp 45–55 | Cite as

Tailoring of anticancer drugs loaded in MWCNT/Poly(MMA-co-HEMA) nanosphere composite by using in situ microemulsion polymerization

  • R. A. Sobh
  • H. E. Nasr
  • A. B. Moustafa
  • W. S. MohamedEmail author
Original Article
  • 102 Downloads

Abstract

Synthesis of multi-walled carbon nanotube (MWCNT)/Poly(methyl methacrylate-co-2-hydroxyethyl methacrylate) P(MMA-co-HEMA) nanocomposite loaded with either of curcumin and its water soluble derivative as two models of anticancer drugs was achieved via in situ microemulsion polymerization technique by using different ratios from multi-walled carbon nanotube MWCNT to drug. The homogenous dispersion of MWCNTs inside the polymer matrix and well defined nano-spheres were proved by TEM and X-ray diffraction XRD. The performance of MWCNT/polymer nanocomposite as drug carrier was examined with respect to the drug content, entrapment efficiency, nano-sphere morphology, thermal stability and in-vitro drug release. Drugs could be loaded in higher content with high Entrapment Efficiency values with improved thermal stability that increased with MWCNT ratio. The in-vitro drug release studies from MWCNT/Poly(MMA-co-HEMA) nanocomposite showed prolonged controlled release in the intestinal fluid pH 7.4 and lost a few amount ≤ 8% of the drug in the stomach fluid pH 1.2.

Keywords

MWCNTs/polymer nanocomposite Micro-emulsion polymerization Anticancer drugs 

Notes

Acknowledgements

We acknowledge the funding agencies National Research centre, Egypt (Project Number 10140004).

Compliance with ethical standards

Conflict of interest

All authors declare that they have no conflictof interest.

Research involving human and animal participants

This article does not contain any studies with human or animal subjects performed by any of the authors.

References

  1. Albalawi AM, Mohamed WS, Elsayed NH (2016) Utilization of MMT clay and MMT-Chitosan for platinol drug delivery. Der Pharm Chem 8(23):27–34Google Scholar
  2. Al-Osaimi J, Alhosiny N, Badawi A, Abdallah S (2013) The effects of CNTs types on the structural and electrical properties of CNTs/PMMA nanocomposite films. Int J Eng Technol 13:77–79Google Scholar
  3. Anand P, Kunnumakkara AB, Newman RA, Aggarwal BB (2007) Bioavailability of curcumin: problems and promises. Mol Pharm 4:807–818CrossRefGoogle Scholar
  4. Athira GK, Jyothi AN (2014) Preparation and characterization of curcumin loaded cassava starch nanoparticles with improved cellular absorption. Int J Pharm Pharm Sci 6:171–176Google Scholar
  5. Baviskar DT, Tamkhane CM, Maniyar AH, Jain DK (2012) Carbon nanotubes: an emerging drug delivery tool in nanotechnology. Int J Pharm Pharm Sci 4:11–15Google Scholar
  6. Blond D, Barron V, Ruether M, Ryan KP, Nicolosi V, Blau WJ, Cole-man JN (2006) Enhancement of modulus, strength, and toughness in poly(methylmethacrylate) based composites by the incorporation of poly(methyl methacrylate) functionalized nanotubes. Adv Funct Mater 16:1608–1614CrossRefGoogle Scholar
  7. Cartiera MS, Ferreira EC, Caputo C, Egan ME, Caplan M (2010) Partial correction of cystic fibrosis defects with PLGA nanoparticles encapsulating curcumin. J Mol Pharm 7:86–93CrossRefGoogle Scholar
  8. Chen J, Chen S, Zhao X, Kuznetsova LV, Wong SS, Ojima I (2008) Functionalized single-walled carbon nanotubes as rationally designed vehicles for tumor-targeted drug delivery. J Am Chem Soc 130:16778–16785CrossRefGoogle Scholar
  9. Chu H, Liu N, Wang X, Jiao Z, Chen Z (2009) Morphology and in vitro release kinetics of drug-loaded micelles based on well-defined PMPC-b-PBMA copolymer. Int J Pharm 371:190–196CrossRefGoogle Scholar
  10. Datsyuk V, Kalyva M, Papagelis K, Parthenios J, Tasis D, Siokou A (2008) Chemical oxidation of multiwalled carbon nanotubes. Carbon 46:833–840CrossRefGoogle Scholar
  11. Daum N, Tscheka C, Schneider ANM (2012) Novel approaches for drug delivery system in nanomedicine: effects of particle design and shape. Wiley Interdiscip Rev 4:52–65Google Scholar
  12. Donsi F, Wang Y, Li J, Huang Q (2010) Preparation of curcumin sub-micrometer dispersions by high-pressure homogenization. J Agric Food Chem 58:2848–5283CrossRefGoogle Scholar
  13. Duan J, Zhang Y, Han S, Chen Y, Li B, Liao M et al (2010) Synthesis and in vitro/in vivo anti-cancer evaluation of curcumin-loaded chitosan/poly (butyl cyanoacrylate) nanoparticles. Int J Pharm 400:211–220CrossRefGoogle Scholar
  14. Foillard S, Zuber G, Doris E (2011) Polyethylenimine-carbon nanotube nanohybrids for RNA-mediated gene silencing at cellular level. Nanoscale 3:1461–1464CrossRefGoogle Scholar
  15. Goel A, Kunnumakkara AB, Aggarwal BB (2008) Curcumin as “Curecumin”: from kitchen to clinic. Biochem Pharm 75:787–809CrossRefGoogle Scholar
  16. Gopi G, Kannan K (2015) Fabrication and in vitro evaluation of nateglinide-loaded ethyl cellulose nanoparticles. Asian J Pharm Clin Res 8:93–96Google Scholar
  17. Hanumansetty S, O’Rear E, Resasco DE (2015) Hydrophilic encapsulation of multi-walled carbon nanotubes using admicellar polymerization. Colloids Surf A 474:1–8CrossRefGoogle Scholar
  18. Hibino N, Suzuki S, Wakahara H, Kobayashi Y, Sato T, Maki H (2011) Short-wavelength electroluminescence from single-walled carbon nanotubes with high bias voltage. ACS Nano 5:1215–1222CrossRefGoogle Scholar
  19. Jia YX, Li HL, Wang M, Wu LY,.Hu YD (2010) Carbon nanotube: possible candidate for forward osmosis. Sep Purif Technol 75:55–60CrossRefGoogle Scholar
  20. Joshi GV, Kevadiya BD, Patel HA, Bajaj HC, Jasra RV (2009) Montmorillonite as a drug delivery system: intercalation and in vitro release of timolol maleate. Int J Pharm 374:53–57CrossRefGoogle Scholar
  21. Kumar SSD, Mahadevan S, Vijayaraghavan R, Mandal AB, MacFarlane DR (2014) Curcumin loaded poly(2-hydroxyethlene methacrylate) nanoparticles from gelled ionic liquid—in vitro cytotoxicity and anti-cancer activity in SKOV-3 cells. J Pharm Sci 51:34–44Google Scholar
  22. Kumar A, Singh M, Singh PP, Singh SK, Raj P, Pandey KD (2016) Antioxidant efficacy and curcumin content of turmeric (Curcuma-Longa L.) flower. Int J Curr Pharm Res 8:112–114Google Scholar
  23. Lafuente E, Callejas MA, Saınz R, Benito AM, Maser WK, Sanjuan ML (2008) The influence of single-walled carbon nanotube functionalization on the electronic properties of their polyaniline composites. Carbon 46:1909–1917CrossRefGoogle Scholar
  24. Li M, Wang X, Tian R, Liu F, Hu H, Chen R (2009) Preparation, solubility, and electro rheological properties of carbon nanotubes/poly(methyl methacrylate) nanocomposites by in situ fictionalization. Compos Part A 40:413–417CrossRefGoogle Scholar
  25. Lin YL, Liu YK, Tsai NM, Hsieh JH, Chen CH, Lin CM, Liao KW (2012) A Lipo-PEG-PEI complex for encapsulating curcumin that enhances its antitumor effects on curcumin-sensitive and curcumin-resistance cells. Nanomed Nanotechnol 8:318–327CrossRefGoogle Scholar
  26. Liu L, Sun L, Wu Q, Guo W, Li L, Chen Y (2013) Curcumin loaded polymeric micelles inhibit breast tumor growth and spontaneous pulmonary metastasis. Int J Pharm 443:175–182CrossRefGoogle Scholar
  27. Luo X, Matranga C, Tan S, Alba N, Cui XT (2011) Carbon nanotube nanoreservior for controlled release of anti-inflammatory dexamethasone. Biomaterials 32:6316–6323CrossRefGoogle Scholar
  28. Mali N, Jadhav S, Karpe M, Kadam V (2011) Carbon nanotubes as carriers for delivery of bioactive and therapeutic agents: an overview. Int J Pharm Pharm Sci 3:45–52Google Scholar
  29. Mathew A, Fukuda T, Nagaoka Y, Hasumura T, Morimoto H, Yoshida Y (2012) Curcumin loaded-PLGA nanoparticles conjugated with Tet-1 peptide for potential use in Alzheimer’s disease. PLoS ONE 7:32–61Google Scholar
  30. McNicholas TP, Yum K, Ahn JH, Mu B, Plettenburg O, Gooderman A (2012) Structure and function of glucose binding protein-single walled carbon nanotube complexes. Small 8:3510–3516CrossRefGoogle Scholar
  31. Mohamed WS, Mostafa AB, Nasr HE (2014) Characterization and application of intercalated montmorillonite with verapamil and its polymethyl methacrylate nanocomposite in drug delivery. Polym Plast Technol Eng 53(14):1425–1433CrossRefGoogle Scholar
  32. Moustafa AB, Sobh RA, Rabie AM, Nasr HE, Ayoub MMH (2013a) Differential microemulsion polymerization as a new root for entrapment of drugs. J Appl Polym Sci 127:4634–4643CrossRefGoogle Scholar
  33. Moustafa AB, Sobh RA, Rabie AM, Nasr HE, Ayoub MMH (2013b) Synthesis and in vitro release of guest drugs-loaded copolymer nanospheres MMA/HEMA via differential microemulsion polymerization. J Appl Polym Sci 129:853–865CrossRefGoogle Scholar
  34. Mukerjee A, Vishwanatha JK (2009) Formulation, characterization and evaluation of curcumin-loaded PLGA nanospheres for cancer therapy. Anticancer Res 29:3867–3875Google Scholar
  35. Rezq AM, Abdel Aziz MT, Al-Malki AL (2011) Gelatin, a novel curcumin drug carrier system. WO/2011/100984. https://www.google.com/patents/WO2011100984A1?cl=en
  36. Ringman JM, Frautschy SA, Cole GM, Masterman DL, Cummings JL (2005) A potential role of the curry spice curcumin in Alzheimer’s disease. Curr Alzheimer Res 2:131–136CrossRefGoogle Scholar
  37. Sahoo NG, Rana S, Cho JW, Li L, Chan SH (2010) Polymer nanocomposites based on functionalized carbon nanotubes. Prog Polym Sci 35:837–867CrossRefGoogle Scholar
  38. Shaikh J, Ankola DD, Beniwal V, Singh D, Kumar MN (2009) Nanoparticle encapsulation improves oral bioavailability of curcumin by at least 9-fold when compared to curcumin administered with piperine as absorption enhancer. Eur J Pharm Sci 37:223–230CrossRefGoogle Scholar
  39. Shang S, Li L, Yang X, Wei Y (2009) Polymethylmethacrylate-carbon nanotubes composites prepared by microemulsion polymerization for gas sensor. Compos Sci Technol 69:1156–1159CrossRefGoogle Scholar
  40. Sharma S, Saraogi GK, Kumar V (2015) Development of spectrophotometric methods for simultaneous determination of artesunate and curcumin in a liposomal formulation. Int J App Pharm 7:18–21Google Scholar
  41. Shen J, Yu C, Ruan H, Gao C, Bruggen BV (2013) Preparation and characterization of thin-film nanocomposite membranes embedded with poly(methyl methacrylate) hydrophobic modified multiwalled carbon nanotubes by interfacial polymerization. J Membr Sci 442:18–26CrossRefGoogle Scholar
  42. Sobh RA, Mohamed WS, Moustafa AB, Nasr HE (2015) Encapsulation of curcumin and curcumin derivative in polymeric nanospheres. Polym Plast Technol Eng 54:1457–1467CrossRefGoogle Scholar
  43. Spitalsky Z, Tasisb D, Papagelis K, Galiotis C (2010) Carbon nanotube–polymer composites: chemistry, processing, mechanical and electrical properties. Prog Polym Sci 35:357–401CrossRefGoogle Scholar
  44. Thompson CJ, Hansford D, Higgins S, Rostron C, Hutcheon GA, Munday DL (2007) Evaluation of ibuprofen-loaded microspheres prepared from novel copolyesters. Int J Pharm 329:53–61CrossRefGoogle Scholar
  45. Thorat YS, Sarvagod AM, Kulkarni SV, Hosmani AH (2015) Treatment of mouth ulcer by curcumin loaded thermoreversible mucoadhesive gel: a technical note. Int J Pharm Pharm Sci 7:399–402Google Scholar
  46. Valot P, Baba M, Nedelec J-M, Sintes-Zydowicz N (2009) Effects of process parameters on the properties of biocompatible ibuprofen-loaded microcapsules. Int J Pharm 369:53–63CrossRefGoogle Scholar
  47. Wang H, Li J, Zhang X, Ouyang Z, Li Q, Su Z, Wei G (2013) Synthesis, characterization and drug release application of carbon nanotube-polymer nanosphere composites. RSC Adv 3:9304–9310CrossRefGoogle Scholar
  48. Wei G, Pan C, Reichert J, Jandt KD (2010) Controlled assembly of protein-protected gold nanoparticles on noncovalent functionalized carbon nanotubes. Carbon 48:645–653CrossRefGoogle Scholar
  49. Wei G, Xu F, Li Z, Jandt KD (2011a) Protein-promoted synthesis of Pt nanoparticles on carbon nanotubes for electrocatalytic nanohybrids with enhanced glucose sensing. J Phys Chem C 115:1153–1160CrossRefGoogle Scholar
  50. Wei G, Zhang J, Xie L, Jandt KD (2011b) Biomimetic growth of hydroxyapatite on super water-soluble carbon nanotube-protein hybrid nanofibers. Carbon 49:2216–2226CrossRefGoogle Scholar
  51. Xiao X, Wang Y (2009) Emulsion copolymerization of fluorinated acrylate in the presence of a polymerizable emulsifier. Colloids Surf A 348:151–156CrossRefGoogle Scholar
  52. Yang L, Zhang X, Ye M (2011) Aptamer- conjugated nanomaterials and their applications. Adv Drug Deliv Rev 63:1361–1370CrossRefGoogle Scholar

Copyright information

© The Korean Society of Pharmaceutical Sciences and Technology 2018

Authors and Affiliations

  1. 1.Polymer and Pigment DepartmentNational Research CentreGizaEgypt

Personalised recommendations