Advertisement

Electronic Materials Letters

, Volume 15, Issue 1, pp 27–35 | Cite as

ZrO2 Nanoparticle Embedded Low Silver Lead Free Solder Alloy for Modern Electronic Devices

  • Ashutosh Sharma
  • Hakki Yu
  • In Sun Cho
  • Hyungtak Seo
  • Byungmin Ahn
Article
  • 58 Downloads

Abstract

In this article, the authors present the synthesis of Sn–1.0Ag–0.5Cu (SAC105) alloy embedded with zirconium oxide nanoparticles using simple mechanical blending and casting route. The cast samples were characterized in terms of microstructural evolution, wetting, microhardness, and drop test reliability. The characterizations were performed by using a tabletop X-ray diffraction, field emission scanning electron microscope, and the compositions were identified by energy dispersive spectroscopy. The results showed that addition of ZrO2 nanoparticles significantly refines the grain size, Ag3Sn, and Cu6Sn5 intermetallic compounds thickness by 46, 14, and 26% respectively as compared to the single component SAC105 alloy. The results were also compared with those of standard Sn–3.0Ag–0.5Cu (SAC305) alloy. Although the spreading and microhardness of SAC105 is found to be slightly poor or comparable to SAC305 yet drop test reliability can be improved significantly after addition of ZrO2 nanoparticles appreciably. This kind of refinement results in a cheap alternative to SAC305 with comparable mechanical strength and high solder joint reliability.

Graphical Abstract

Keywords

Microstructure Intermetallic Microhardness Low silver Electronics Melting Nanoparticle 

Notes

Acknowledgements

This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (NRF-2018R1D1A1B07044481) (B.A.). This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (NRF-2018R1D1A1B07044706) (A.S.). This research was also supported by the Ajou University research fund.

References

  1. 1.
    Abtew, M., Selvaduray, G.: Lead-free solders in microelectronics. Mater. Sci. Eng. R 27, 95 (2000)CrossRefGoogle Scholar
  2. 2.
    Zeng, K., Tu, K.N.: Six cases of reliability study of Pb-free solder joints in electronic packaging technology. Mater. Sci. Eng. R 38, 55 (2002)CrossRefGoogle Scholar
  3. 3.
    Sharma, A., Das, S., Das, K.: Pulse electrodeposition of lead-free tin-based composites for microelectronic packaging. In: Mohamed, A.M.A. (ed.) Electrodeposition of Composite Materials, pp. 253–274. InTech, Croatia (2016).  https://doi.org/10.5772/62036. http://www.intechopen.com
  4. 4.
    Suganuma, K.: Advances in lead-free electronics soldering. Curr. Opin. Solid State. Mater. 5, 55 (2001)CrossRefGoogle Scholar
  5. 5.
    Sharma, A., Das, S., Das, K.: Pulse electroplating of ultrafine grained tin coating. In: Aliofkhazraei, M. (ed.) Electroplating of Nanostructures, pp. 105–129. InTech, Croatia (2015).  https://doi.org/10.5772/61255 Google Scholar
  6. 6.
    Lee, H.Y., Sharma, A., Kee, S.H., Lee, Y.W., Moon, J.T., Jung, J.P.: Effect of aluminium additions on wettability and intermetallic compound (IMC) growth of lead free Sn–2wt%Ag–5wt%Bi soldered joints. Electron. Mater. Lett. 10, 997 (2014)CrossRefGoogle Scholar
  7. 7.
    Pandher, R., Lawlor, T.: Effect of silver in common lead-free alloys. In: Proceedings of International Conference on Soldering and Reliability, ICSR 2009, Toronto, Canada (2009)Google Scholar
  8. 8.
    Shen, J., Chan, Y.C.: Research advances in nano-composite solders. Microelectron. Reliab. 49, 223 (2009)CrossRefGoogle Scholar
  9. 9.
    Xiang, K.K., Haseeb, A.S.M.A., Arafat, M.M., Yingxin, G.: Effects of Mn nanoparticles on wettability and intermetallic compounds in between Sn–3.8Ag–0.7Cu and Cu substrate during multiple reflow. In: Proceedings of 4th Asia Symposium on Quality Electronic Design, pp. 297–301. IEEE, Penang, Malaysia (2012)Google Scholar
  10. 10.
    Nishikawa, H., Komatsu, A., Takemoto, T.: Effect of Ni or Co addition to Sn–Ag solder on microstructure and joint strength at interface. Mater. Trans. 49(7), 1518 (2008)CrossRefGoogle Scholar
  11. 11.
    Kim, S.H., Yu, J.: Effects of Fe on the Kirkendall void formation of Sn–3.5Ag–xFe/Cu solder joints. In: International Symposium on Microelectronics, Vol. 2010, no. 1, pp. 000294–000297, FALL 2010 (2010)Google Scholar
  12. 12.
    Wang, J.X., Xue, S.B., Han, Z.J., Yu, S.L., Chen, Y., Shi, Y.P., Wang, H.: Effects of rare earth Ce on microstructures, solderability of Sn–Ag–Cu and Sn–Cu–Ni solders as well as mechanical properties of soldered joints. J. Alloys Compd. 467, 219 (2009)CrossRefGoogle Scholar
  13. 13.
    Nadia, A., Haseeb, A.S.M.A.: Understanding the effects of addition of copper nanoparticles to Sn–3.5Ag solder. Solder. Surf. Mt. Technol. 23, 68 (2011)CrossRefGoogle Scholar
  14. 14.
    Koscielski, M., Bukat, K., Jakubowska, M., Mlozniak, A.: Application of silver nanoparticles to improve wettability of SnAgCu solder paste. In: Proceedings of the 33rd International Seminar on Electronic Technology, pp. 473–477. IEEE, Poland (2010)Google Scholar
  15. 15.
    Gain, A.K., Chan, Y.C., Yung, W.K.C.: Effect of additions of ZrO2 nano-particles on the microstructure and shear strength of Sn–Ag–Cu solder on Au/Ni metallized Cu pads. Microelectron. Reliab. 51, 2306 (2011)CrossRefGoogle Scholar
  16. 16.
    Zhong, X.L., Gupta, M.: Development of lead-free Sn–0.7Cu/Al2O3 nanocomposite solders with superior strength. J. Phys. D Appl. Phys. 41, 095403 (2008)CrossRefGoogle Scholar
  17. 17.
    Gain, A.K., Chan, Y.C., Yung, W.K.C.: Microstructure, thermal analysis and hardness of a Sn–Ag–Cu–1 wt% nano-TiO2 composite solder on flexible ball grid array substrates. Microelectron. Reliab. 51, 975 (2011)CrossRefGoogle Scholar
  18. 18.
    Liu, P., Yao, P., Liu, J.: Effect of SiC nanoparticle additions on microstructure and microhardness of Sn–Ag–Cu solder alloy. Electron. Mater. 37, 874 (2008)CrossRefGoogle Scholar
  19. 19.
    Mohd Salleh, M.A.A., Mustafa Al Bakri, A.M., Kamarudin, H., Bnhussain, M., Zan@Hazizi, M.H., Somidin, F.: Solderability of Sn–0.7Cu/Si3N4 lead-free composite solder on Cu-substrate. Phys. Proc. 22, 299 (2011)CrossRefGoogle Scholar
  20. 20.
    Babaghorbani, P., Nai, S.M.L., Gupta, M.: Development of lead-free Sn-3.5Ag/SnO2 nanocomposite solders. J. Mater. Sci. Mater. Electron. 20, 571 (2009)CrossRefGoogle Scholar
  21. 21.
    Fawzy, A., Fayek, S.A., Sobhy, M., Nassr, E., Mousa, M., Saad, G.: Effect of ZnO nanoparticles addition on thermal, microstructure and tensile properties of Sn–3.5 Ag–0.5 Cu (SAC355) solder alloy. J. Mater. Sci. Mater. Electron. 24, 3210 (2013)CrossRefGoogle Scholar
  22. 22.
    Sharma, A., Bhattacharya, S., Das, S., Fecht, H.J., Das, K.: Development of lead free pulse electrodeposited tin based composite solder coating reinforced with ex situ cerium oxide nanoparticles. J. Alloys Compd. 574, 609 (2013)CrossRefGoogle Scholar
  23. 23.
    Sharma, A., Bhattacharya, S., Das, S., Das, K.: Fabrication of Sn–Ag/CeO2 electro-composite solder by pulse electrodeposition. Metall. Mater. Trans. A 44A, 5587 (2013)CrossRefGoogle Scholar
  24. 24.
    Sharma, A., Baek, B.G., Jung, J.P.: Influence of La2O3 nanoparticle additions on microstructure, wetting, and tensile characteristics of Sn–Ag–Cu alloy. Mater. Des. 87, 370 (2015)CrossRefGoogle Scholar
  25. 25.
    Nai, S.M.L., Wei, J., Gupta, M.: Lead free solder reinforced with Multiwalled carbon nanotubes. J. Electron. Mater. 35, 1518 (2006)CrossRefGoogle Scholar
  26. 26.
    Sharma, A., Sohn, H.R., Jung, J.P.: Effect of graphene nanoplatelets on wetting, microstructure, and tensile characteristics of Sn–3.0Ag–0.5Cu (SAC) alloy. Metall. Mater. Trans. A 47A, 494 (2016)CrossRefGoogle Scholar
  27. 27.
    Bhattacharya, S., Sharma, A., Das, S., Das, K.: Synthesis and properties of pulse electrodeposited lead-free tin-based Sn/ZrSiO4 nanocomposite coatings. Metall. Mater. Trans. A 47(3), 1292 (2016)CrossRefGoogle Scholar
  28. 28.
    Sharma, A., Xu, D.E., Chow, J., Mayer, M., Sohn, H.R., Jung, J.P.: Electromigration of composite Sn–Ag–Cu solder bumps. Electron. Mater. Lett. 11(6), 1072 (2015)CrossRefGoogle Scholar
  29. 29.
    Sharma, A.: Effect of synthesis routes on microstructure of nanocrystalline cerium oxide powder. Mater. Sci. Appl. 4, 504 (2013)Google Scholar
  30. 30.
    Fima, P., Gazda, A.: Thermal analysis of selected Sn–Ag–Cu alloys. J. Therm. Anal. Calorim. 112, 731 (2013)CrossRefGoogle Scholar
  31. 31.
    Sharma, A., Roh, M.H., Jung, D.H., Jung, J.P.: Effect of ZrO2 nanoparticles on the microstructure of Al–Si–Cu filler for low-temperature Al brazing applications. Metall. Mater. Trans. A 47(1), 510 (2016)CrossRefGoogle Scholar
  32. 32.
    Sharma, A., Lim, D.U., Jung, J.P.: Microstructure and brazeability of SiC nanoparticles reinforced Al–9Si–20Cu produced by induction melting. Mater. Sci. Technol. 32(8), 773 (2016)Google Scholar
  33. 33.
    Desmond, Y.R.C., Che, F.X., John, H.L.P., Kellin, N., Jane, Y.N.T., Patrick, T.H.L.: Drop impact reliability testing for lead-free and lead-based soldered IC packages. Microelectron. Reliab. 46, 1160 (2006)CrossRefGoogle Scholar

Copyright information

© The Korean Institute of Metals and Materials 2018

Authors and Affiliations

  1. 1.Department of Materials Science and Engineering and Department of Energy Systems ResearchAjou UniversitySuwonKorea

Personalised recommendations