Advertisement

Arabian Journal for Science and Engineering

, Volume 44, Issue 5, pp 4575–4585 | Cite as

Effect of Crushed Glass on Skid Resistance, Moisture Sensitivity and Resilient Modulus of Hot Mix Asphalt

  • P. Afkhamy Meybodi
  • H. Khani SanijEmail author
  • S. H. Hosseini
  • M. Olazar
Research Article - Civil Engineering

Abstract

Road quality is one of the most important factors concerning the safety of transportation. Adequate skid resistance of a road surface allows drivers to maintain effective control on their vehicles and maneuver when necessary to avoid accidents. Using waste glass in asphalt mixtures is advantageous from the point of technical, environmental and economic perspectives. This study focuses on the topic of asphalt containing crushed glass, also known as glasphalt, by evaluating the skid resistance and moisture sensitivity of these mixtures. Therefore, a laboratory method was used, in which two types of continuous gradation of hot mix asphalt were chosen based on the Iranian highway asphalt paving code (Code No. 234). The fine aggregates, up to 15% of the total aggregate content, were replaced with glass particles in three different gradations. Skid resistance was evaluated in a British pendulum tester, moisture sensitivity by modified Lottman test, and resilient modulus in a UTM machine. Specimens with a moisture sensitivity problem were improved by using zycotherm as an anti-stripping agent. It was found that the crushed glass particles improved skid resistance by up to 20%. The moisture sensitivity test showed that some glasphalts were susceptible to stripping issue, which can be solved by using 0.1% zycotherm in terms of bitumen weight. Finally, findings revealed that glass particles improved resilient modulus of specimens.

Keywords

Glasphalt Skid resistance British pendulum Moisture sensitivity Zycotherm Resilient modulus 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Zhang, X.; Liu, T.; Liu, C.; Chen, Z.: Research on skid resistance of asphalt pavement based on three dimensional laser-scanning technology and pressure-sensitive film. Constr. Build. Mater. 69, 49–59 (2014)CrossRefGoogle Scholar
  2. 2.
    Asi, I.M.: Evaluating skid resistance of different asphalt concrete mixes. Build. Environ. 42, 325–329 (2007)CrossRefGoogle Scholar
  3. 3.
    Ahadi, M.R.; Nasirahmadi, K.: The effect of asphalt concrete micro & macro texture on skid resistance. J. Rehabil. Civ. Eng. 1, 15–28 (2013)Google Scholar
  4. 4.
    Wang, D.; Chen, X.; Oeser, M.; Stanjek, H.; Steinauer, B.: Study of micro-texture and skid resistance change of granite slabs during the polishing with the Aachen Polishing Machine. Wear 318, 1–11 (2014)CrossRefGoogle Scholar
  5. 5.
    Araujo, V.M.C.; Bessa, I.; Castelo Branco, V.T.F.: Measuring skid resistance of hot mix asphalt using the aggregate image measurement system (AIMS). Constr. Build. Mater. 98, 476–481 (2015)CrossRefGoogle Scholar
  6. 6.
    Arabani, M.: Effect of glass cullet on the improvement of the dynamic behaviour of asphalt concrete. Constr. Build. Mater. 25, 1181–1185 (2011)CrossRefGoogle Scholar
  7. 7.
    Shafabakhsh, G.H.; Sajed, Y.: Investigation of dynamic behavior of hot mix asphalt containing waste materials; case study: glass cullet. Case Stud. Construc. Mater. 1, 96–103 (2014)CrossRefGoogle Scholar
  8. 8.
    Arabani, M.; Mirabdolazimi, S.M.; Ferdowsi, B.: Modeling the fatigue behaviors of glasphalt mixtures. Sci. Iran. 19, 3341–345 (2012)CrossRefGoogle Scholar
  9. 9.
    Arabani, M.; Jamshidi, R.; Sadeghnejad, M.: Using of 2D finite element modeling to predict the glasphalt mixture rutting behavior. Constr. Build. Mater. 68, 183–191 (2014)CrossRefGoogle Scholar
  10. 10.
    Airey, G.D.; Collop, A.C.; Thom, N.H.: Mechanical performance of asphalt mixtures incorporating slag and glass secondary aggregates. In: Proceeding of the 8th Conference on Asphalt Pavements for Southern Africa, CAPSA’04, Sun City (2004)Google Scholar
  11. 11.
    Su, N.; Chen, J.S.: Engineering properties of asphalt concrete made with cycled glass. Resour. Conserv. Recycl. 35, 259–274 (2002)CrossRefGoogle Scholar
  12. 12.
    Behbahani, H.; Ziari, H.; Kamboozia, N.; Khaki, A.L.; Mirabdolazimi, S.M.: Evaluation of performance and moisture sensitivity of glasphalt mixtures modified with nanotechnology zycosoil as an anti-stripping additive. Constr. Build. Mater. 78, 60–68 (2015)CrossRefGoogle Scholar
  13. 13.
    Georgiou, P.; Loizos, A.: A laboratory compaction approach to characterize asphalt pavement surface friction performance. Wear 311, 114–122 (2014)CrossRefGoogle Scholar
  14. 14.
    Hall, J.W.; Smith, K.L.; Glover, L.T.; Evans, L.D.; Wambold, J.C.; Yager, T.J.; Rado, Z.: Guide for Pavement Friction, Final Report for National Cooperative Highway Research Program (NCHRP) Project 01-43 (2009)Google Scholar
  15. 15.
    Kogbara, R.B.; Masad, E.Y.; Kassem, E.; Scarpas, A.T.; Anupam, K.: A state-of-the-art review of parameters influencing measurement and modeling of skid resistance of asphalt pavements. Constr. Build. Mater. 114, 602–617 (2016)CrossRefGoogle Scholar
  16. 16.
    Moghadas Nejad, F.; Azarhoosh, A.R.; Hamedi, G.H.; Azarhoosh, M.J.: Influence of using nonmaterial to reduce the moisture susceptibility of hot mix asphalt. Constr. Build. Mater. 31, 384–388 (2012)CrossRefGoogle Scholar
  17. 17.
    Solaimanian, M.; Harvey, J.; Tahmoressi, M.; Tandon, V.: Test methods to predict moisture sensitivity of hot mix asphalt pavements. In: A National Seminar, San Diego, CA (2003)Google Scholar
  18. 18.
    Mirzababaei, P.: Effect of zycotherm on moisture susceptibility of Warm Mix Asphalt mixtures prepared with different aggregate types and gradations. Constr. Build. Mater. 116, 403–412 (2016)CrossRefGoogle Scholar
  19. 19.
    Henry, J.J.: Evaluation of Pavement Friction Characteristics. NCHRP Synthesis 291, National Cooperative Highway Research Program (NCHRP), Washington, DC (2000)Google Scholar
  20. 20.
    ASTM E 303-93, Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester (1998)Google Scholar
  21. 21.
    BS EN 13036-4, Road and airfield surface characteristics—test methods—Part 4: Method for measurement of Slip/skid resistance of a surface—The Pendulum test (2003)Google Scholar
  22. 22.
    ASTM E 965-96, Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique (2001)Google Scholar
  23. 23.
    ASTM E 1960-03: Standard Practice for Calculating International Friction Index of a Pavement Surface (2003)Google Scholar
  24. 24.
    Wang, D.; Chen, X.; Yin, C.; Oeser, M.; Steinauer, B.: Influence of different polishing conditions on the skid resistance development of asphalt surface. Wear 308, 71–78 (2013)CrossRefGoogle Scholar
  25. 25.
    Kane, M.; Ignacio Artamendi, I.; Scarpas, T.: Long-term skid resistance of asphalt surfacings: correlation between Wehner–Schulze friction values and the mineralogical composition of the aggregates. Wear 303, 235–243 (2013)CrossRefGoogle Scholar
  26. 26.
    Bustos, M.; Echaveguren, T.; Solminihac, H.D.; Caroca, A.: Development of correlation equations between different measurements of skid resistance in pavements. Indian J. Eng. Mater. Sci. 13, 117–122 (2006)Google Scholar
  27. 27.
    AASHTO T283-03, Standard method of test for resistance of compacted asphalt mixture to moisture induced damage, American Association of State Highway and Transportation Officials (2000)Google Scholar

Copyright information

© King Fahd University of Petroleum & Minerals 2018

Authors and Affiliations

  • P. Afkhamy Meybodi
    • 1
  • H. Khani Sanij
    • 1
    Email author
  • S. H. Hosseini
    • 2
  • M. Olazar
    • 3
  1. 1.Department of Civil EngineeringYazd UniversityYazdIran
  2. 2.Department of Chemical EngineeringIlam UniversityIlamIran
  3. 3.Department of Chemical EngineeringUniversity of the Basque Country UPV/EHUBilbaoSpain

Personalised recommendations